sl-controls
2b06161cb4
Adds ADC-based motor current sensing with configurable overload threshold, soft PWM limiting, hard cutoff on sustained overload, and auto-recovery. Changes: - include/motor_current.h: MotorCurrentState enum (NORMAL/SOFT_LIMIT/COOLDOWN), thresholds (5A hard, 4A soft, 2s overload, 10s cooldown), full API - src/motor_current.c: reads battery_adc_get_current_ma() each tick (reuses existing ADC3 IN13/PC3 DMA sampling); linear PWM scale in soft-limit zone (scale256 fixed-point); fault counter + one-tick fault_pending flag for main-loop fault log integration; telemetry at MOTOR_CURR_TLM_HZ (5 Hz) - include/pid_flash.h: add pid_sched_entry_t (16 bytes), pid_sched_flash_t (128 bytes at 0x0807FF40), PID_SCHED_MAX_BANDS=6, pid_flash_load_schedule(), pid_flash_save_all() — fixes missing types needed by jlink.h (Issue #550) - src/pid_flash.c: implement flash_write_words() helper, pid_flash_load_schedule(), pid_flash_save_all() — single sector-7 erase covers both schedule and PID records - include/jlink.h: add JLINK_TLM_MOTOR_CURRENT (0x86), jlink_tlm_motor_current_t (8 bytes: current_ma, limit_pct, state, fault_count), jlink_send_motor_current_tlm() - src/jlink.c: implement jlink_send_motor_current_tlm() (14-byte frame) Motor overload state machine: MC_NORMAL : current_ma < 4000 mA — full PWM authority MC_SOFT_LIMIT : 4000-5000 mA — linear reduction (0% at 4A → 100% at 5A) MC_COOLDOWN : >5A sustained 2s → zero output for 10s then NORMAL Main-loop integration: motor_current_tick(now_ms); if (motor_current_fault_pending()) fault_log_append(FAULT_MOTOR_OVERCURRENT); cmd = motor_current_apply_limit(balance_pid_output()); motor_current_send_tlm(now_ms); Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>