feat: CAN bus watchdog and error recovery (Issue #694)

- CAN1_SCE_IRQHandler: detects bus-off/error-passive/error-warning from ESR
- can_driver_watchdog_tick(): polls ESR each cycle, auto-restarts after CAN_WDOG_RESTART_MS (200ms)
- can_wdog_t: tracks restart_count, busoff_count, errpassive_count, errwarn_count, tec, rec
- JLink TLM code 0x8F (JLINK_TLM_CAN_WDOG) with jlink_send_can_wdog_tlm()
- main.c: calls watchdog_tick() each loop, sends CAN wdog TLM at 1 Hz
- TEST_HOST: inject_esr() stub + busoff_pending flag fixes t=0 sentinel ambiguity
- test/test_can_watchdog.c: 23 unit tests, all pass

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

android/build.gradle

@@ -0,0 +1,46 @@
+plugins {
+    id 'com.android.application'
+    id 'kotlin-android'
+}
+
+android {
+    compileSdk 34
+    namespace 'com.saltylab.uwbtag'
+
+    defaultConfig {
+        applicationId "com.saltylab.uwbtag"
+        minSdk 26
+        targetSdk 34
+        versionCode 1
+        versionName "1.0"
+    }
+
+    buildTypes {
+        release {
+            minifyEnabled false
+        }
+    }
+
+    buildFeatures {
+        viewBinding true
+    }
+
+    compileOptions {
+        sourceCompatibility JavaVersion.VERSION_17
+        targetCompatibility JavaVersion.VERSION_17
+    }
+
+    kotlinOptions {
+        jvmTarget = '17'
+    }
+}
+
+dependencies {
+    implementation 'androidx.core:core-ktx:1.12.0'
+    implementation 'androidx.appcompat:appcompat:1.6.1'
+    implementation 'com.google.android.material:material:1.11.0'
+    implementation 'androidx.recyclerview:recyclerview:1.3.2'
+    implementation 'androidx.lifecycle:lifecycle-runtime-ktx:2.7.0'
+    implementation 'org.jetbrains.kotlinx:kotlinx-coroutines-android:1.7.3'
+    implementation 'com.google.code.gson:gson:2.10.1'
+}

android/src/main/AndroidManifest.xml

@@ -0,0 +1,37 @@
+<?xml version="1.0" encoding="utf-8"?>
+<manifest xmlns:android="http://schemas.android.com/apk/res/android">
+
+    <!-- BLE permissions (API 31+) -->
+    <uses-permission android:name="android.permission.BLUETOOTH_SCAN"
+        android:usesPermissionFlags="neverForLocation" />
+    <uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />
+    <uses-permission android:name="android.permission.BLUETOOTH_ADVERTISE" />
+
+    <!-- Legacy BLE (API < 31) -->
+    <uses-permission android:name="android.permission.BLUETOOTH"
+        android:maxSdkVersion="30" />
+    <uses-permission android:name="android.permission.BLUETOOTH_ADMIN"
+        android:maxSdkVersion="30" />
+    <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"
+        android:maxSdkVersion="30" />
+
+    <uses-feature android:name="android.hardware.bluetooth_le" android:required="true" />
+
+    <application
+        android:allowBackup="true"
+        android:label="UWB Tag Config"
+        android:theme="@style/Theme.MaterialComponents.DayNight.DarkActionBar">
+
+        <activity
+            android:name=".UwbTagBleActivity"
+            android:exported="true"
+            android:launchMode="singleTop">
+            <intent-filter>
+                <action android:name="android.intent.action.MAIN" />
+                <category android:name="android.intent.category.LAUNCHER" />
+            </intent-filter>
+        </activity>
+
+    </application>
+
+</manifest>

android/src/main/kotlin/com/saltylab/uwbtag/UwbTagBleActivity.kt

@@ -0,0 +1,444 @@
+package com.saltylab.uwbtag
+
+import android.Manifest
+import android.annotation.SuppressLint
+import android.bluetooth.*
+import android.bluetooth.le.*
+import android.content.Context
+import android.content.pm.PackageManager
+import android.os.Build
+import android.os.Bundle
+import android.os.Handler
+import android.os.Looper
+import android.view.LayoutInflater
+import android.view.View
+import android.view.ViewGroup
+import android.widget.Button
+import android.widget.TextView
+import android.widget.Toast
+import androidx.appcompat.app.AppCompatActivity
+import androidx.core.app.ActivityCompat
+import androidx.core.content.ContextCompat
+import androidx.recyclerview.widget.LinearLayoutManager
+import androidx.recyclerview.widget.RecyclerView
+import com.google.android.material.card.MaterialCardView
+import com.google.android.material.switchmaterial.SwitchMaterial
+import com.google.android.material.textfield.TextInputEditText
+import com.google.gson.Gson
+import com.saltylab.uwbtag.databinding.ActivityUwbTagBleBinding
+import java.util.UUID
+
+// ---------------------------------------------------------------------------
+// GATT service / characteristic UUIDs
+// ---------------------------------------------------------------------------
+private val SERVICE_UUID     = UUID.fromString("12345678-1234-5678-1234-56789abcdef0")
+private val CHAR_CONFIG_UUID = UUID.fromString("12345678-1234-5678-1234-56789abcdef1") // read/write JSON config
+private val CHAR_STATUS_UUID = UUID.fromString("12345678-1234-5678-1234-56789abcdef2") // notify: tag status string
+private val CHAR_BATT_UUID   = UUID.fromString("12345678-1234-5678-1234-56789abcdef3") // notify: battery %
+private val CCCD_UUID        = UUID.fromString("00002902-0000-1000-8000-00805f9b34fb")
+
+// BLE scan timeout
+private const val SCAN_TIMEOUT_MS = 15_000L
+
+// Permissions request code
+private const val REQ_PERMISSIONS = 1001
+
+// ---------------------------------------------------------------------------
+// Data model
+// ---------------------------------------------------------------------------
+data class TagConfig(
+    val tag_name: String = "UWB_TAG_0001",
+    val sleep_timeout_s: Int = 300,
+    val display_brightness: Int = 50,
+    val uwb_channel: Int = 9,
+    val ranging_interval_ms: Int = 100,
+    val battery_report: Boolean = true
+)
+
+data class ScannedDevice(
+    val name: String,
+    val address: String,
+    var rssi: Int,
+    val device: BluetoothDevice
+)
+
+// ---------------------------------------------------------------------------
+// RecyclerView adapter for scanned devices
+// ---------------------------------------------------------------------------
+class DeviceAdapter(
+    private val onConnect: (ScannedDevice) -> Unit
+) : RecyclerView.Adapter<DeviceAdapter.VH>() {
+
+    private val items = mutableListOf<ScannedDevice>()
+
+    fun update(device: ScannedDevice) {
+        val idx = items.indexOfFirst { it.address == device.address }
+        if (idx >= 0) {
+            items[idx] = device
+            notifyItemChanged(idx)
+        } else {
+            items.add(device)
+            notifyItemInserted(items.size - 1)
+        }
+    }
+
+    fun clear() {
+        items.clear()
+        notifyDataSetChanged()
+    }
+
+    override fun onCreateViewHolder(parent: ViewGroup, viewType: Int): VH {
+        val view = LayoutInflater.from(parent.context)
+            .inflate(R.layout.item_ble_device, parent, false)
+        return VH(view)
+    }
+
+    override fun onBindViewHolder(holder: VH, position: Int) = holder.bind(items[position])
+    override fun getItemCount() = items.size
+
+    inner class VH(view: View) : RecyclerView.ViewHolder(view) {
+        private val tvName    = view.findViewById<TextView>(R.id.tvDeviceName)
+        private val tvAddress = view.findViewById<TextView>(R.id.tvDeviceAddress)
+        private val tvRssi    = view.findViewById<TextView>(R.id.tvRssi)
+        private val btnConn   = view.findViewById<Button>(R.id.btnConnect)
+
+        fun bind(item: ScannedDevice) {
+            tvName.text    = item.name
+            tvAddress.text = item.address
+            tvRssi.text    = "${item.rssi} dBm"
+            btnConn.setOnClickListener { onConnect(item) }
+        }
+    }
+}
+
+// ---------------------------------------------------------------------------
+// Activity
+// ---------------------------------------------------------------------------
+@SuppressLint("MissingPermission") // permissions checked at runtime before any BLE call
+class UwbTagBleActivity : AppCompatActivity() {
+
+    private lateinit var binding: ActivityUwbTagBleBinding
+    private val gson = Gson()
+    private val mainHandler = Handler(Looper.getMainLooper())
+
+    // BLE
+    private val btManager by lazy { getSystemService(Context.BLUETOOTH_SERVICE) as BluetoothManager }
+    private val btAdapter by lazy { btManager.adapter }
+    private var bleScanner: BluetoothLeScanner? = null
+    private var gatt: BluetoothGatt? = null
+    private var configChar: BluetoothGattCharacteristic? = null
+    private var statusChar: BluetoothGattCharacteristic? = null
+    private var battChar: BluetoothGattCharacteristic? = null
+    private var isScanning = false
+
+    private val deviceAdapter = DeviceAdapter(onConnect = ::connectToDevice)
+
+    // ---------------------------------------------------------------------------
+    // Lifecycle
+    // ---------------------------------------------------------------------------
+    override fun onCreate(savedInstanceState: Bundle?) {
+        super.onCreate(savedInstanceState)
+        binding = ActivityUwbTagBleBinding.inflate(layoutInflater)
+        setContentView(binding.root)
+        setSupportActionBar(binding.toolbar)
+
+        binding.rvDevices.layoutManager = LinearLayoutManager(this)
+        binding.rvDevices.adapter = deviceAdapter
+
+        binding.btnScan.setOnClickListener {
+            if (isScanning) stopScan() else startScanIfPermitted()
+        }
+        binding.btnDisconnect.setOnClickListener { disconnectGatt() }
+        binding.btnReadConfig.setOnClickListener { readConfig() }
+        binding.btnWriteConfig.setOnClickListener { writeConfig() }
+
+        requestBlePermissions()
+    }
+
+    override fun onDestroy() {
+        super.onDestroy()
+        stopScan()
+        disconnectGatt()
+    }
+
+    // ---------------------------------------------------------------------------
+    // Permissions
+    // ---------------------------------------------------------------------------
+    private fun requestBlePermissions() {
+        val needed = mutableListOf<String>()
+        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.S) {
+            if (!hasPermission(Manifest.permission.BLUETOOTH_SCAN))
+                needed += Manifest.permission.BLUETOOTH_SCAN
+            if (!hasPermission(Manifest.permission.BLUETOOTH_CONNECT))
+                needed += Manifest.permission.BLUETOOTH_CONNECT
+        } else {
+            if (!hasPermission(Manifest.permission.ACCESS_FINE_LOCATION))
+                needed += Manifest.permission.ACCESS_FINE_LOCATION
+        }
+        if (needed.isNotEmpty()) {
+            ActivityCompat.requestPermissions(this, needed.toTypedArray(), REQ_PERMISSIONS)
+        }
+    }
+
+    private fun hasPermission(perm: String) =
+        ContextCompat.checkSelfPermission(this, perm) == PackageManager.PERMISSION_GRANTED
+
+    override fun onRequestPermissionsResult(
+        requestCode: Int, permissions: Array<out String>, grantResults: IntArray
+    ) {
+        super.onRequestPermissionsResult(requestCode, permissions, grantResults)
+        if (requestCode == REQ_PERMISSIONS &&
+            grantResults.any { it != PackageManager.PERMISSION_GRANTED }) {
+            toast("BLE permissions required")
+        }
+    }
+
+    // ---------------------------------------------------------------------------
+    // BLE Scan
+    // ---------------------------------------------------------------------------
+    private fun startScanIfPermitted() {
+        if (btAdapter?.isEnabled != true) { toast("Bluetooth is off"); return }
+        bleScanner = btAdapter.bluetoothLeScanner
+        val filter = ScanFilter.Builder()
+            .setDeviceNamePattern("UWB_TAG_.*".toRegex().toPattern())
+            .build()
+        val settings = ScanSettings.Builder()
+            .setScanMode(ScanSettings.SCAN_MODE_LOW_LATENCY)
+            .build()
+        deviceAdapter.clear()
+        bleScanner?.startScan(listOf(filter), settings, scanCallback)
+        isScanning = true
+        binding.btnScan.text = "Stop"
+        binding.tvScanStatus.text = "Scanning…"
+        mainHandler.postDelayed({ stopScan() }, SCAN_TIMEOUT_MS)
+    }
+
+    private fun stopScan() {
+        bleScanner?.stopScan(scanCallback)
+        isScanning = false
+        binding.btnScan.text = "Scan"
+        binding.tvScanStatus.text = "Scan stopped"
+    }
+
+    private val scanCallback = object : ScanCallback() {
+        override fun onScanResult(callbackType: Int, result: ScanResult) {
+            val name = result.device.name ?: return
+            if (!name.startsWith("UWB_TAG_")) return
+            val dev = ScannedDevice(
+                name    = name,
+                address = result.device.address,
+                rssi    = result.rssi,
+                device  = result.device
+            )
+            mainHandler.post { deviceAdapter.update(dev) }
+        }
+
+        override fun onScanFailed(errorCode: Int) {
+            mainHandler.post {
+                binding.tvScanStatus.text = "Scan failed (code $errorCode)"
+                isScanning = false
+                binding.btnScan.text = "Scan"
+            }
+        }
+    }
+
+    // ---------------------------------------------------------------------------
+    // GATT Connection
+    // ---------------------------------------------------------------------------
+    private fun connectToDevice(scanned: ScannedDevice) {
+        stopScan()
+        binding.tvScanStatus.text = "Connecting to ${scanned.name}…"
+        gatt = scanned.device.connectGatt(this, false, gattCallback, BluetoothDevice.TRANSPORT_LE)
+    }
+
+    private fun disconnectGatt() {
+        gatt?.disconnect()
+        gatt?.close()
+        gatt = null
+        configChar = null
+        statusChar = null
+        battChar = null
+        mainHandler.post {
+            binding.cardConfig.visibility = View.GONE
+            binding.tvScanStatus.text = "Disconnected"
+        }
+    }
+
+    private val gattCallback = object : BluetoothGattCallback() {
+
+        override fun onConnectionStateChange(g: BluetoothGatt, status: Int, newState: Int) {
+            when (newState) {
+                BluetoothProfile.STATE_CONNECTED -> {
+                    mainHandler.post { binding.tvScanStatus.text = "Connected — discovering services…" }
+                    g.discoverServices()
+                }
+                BluetoothProfile.STATE_DISCONNECTED -> {
+                    mainHandler.post {
+                        binding.cardConfig.visibility = View.GONE
+                        binding.tvScanStatus.text = "Disconnected"
+                        toast("Tag disconnected")
+                    }
+                    gatt?.close()
+                    gatt = null
+                }
+            }
+        }
+
+        override fun onServicesDiscovered(g: BluetoothGatt, status: Int) {
+            if (status != BluetoothGatt.GATT_SUCCESS) {
+                mainHandler.post { toast("Service discovery failed") }
+                return
+            }
+            val service = g.getService(SERVICE_UUID)
+            if (service == null) {
+                mainHandler.post { toast("UWB config service not found on tag") }
+                return
+            }
+            configChar = service.getCharacteristic(CHAR_CONFIG_UUID)
+            statusChar = service.getCharacteristic(CHAR_STATUS_UUID)
+            battChar   = service.getCharacteristic(CHAR_BATT_UUID)
+
+            // Subscribe to status notifications
+            statusChar?.let { enableNotifications(g, it) }
+            battChar?.let   { enableNotifications(g, it) }
+
+            // Initial config read
+            configChar?.let { g.readCharacteristic(it) }
+
+            mainHandler.post {
+                val devName = g.device.name ?: g.device.address
+                binding.tvConnectedName.text = "Connected: $devName"
+                binding.cardConfig.visibility = View.VISIBLE
+                binding.tvScanStatus.text = "Connected to $devName"
+            }
+        }
+
+        override fun onCharacteristicRead(
+            g: BluetoothGatt,
+            characteristic: BluetoothGattCharacteristic,
+            status: Int
+        ) {
+            if (status != BluetoothGatt.GATT_SUCCESS) return
+            if (characteristic.uuid == CHAR_CONFIG_UUID) {
+                val json = characteristic.value?.toString(Charsets.UTF_8) ?: return
+                val cfg = runCatching { gson.fromJson(json, TagConfig::class.java) }.getOrNull() ?: return
+                mainHandler.post { populateFields(cfg) }
+            }
+        }
+
+        // API 33+ callback
+        override fun onCharacteristicRead(
+            g: BluetoothGatt,
+            characteristic: BluetoothGattCharacteristic,
+            value: ByteArray,
+            status: Int
+        ) {
+            if (status != BluetoothGatt.GATT_SUCCESS) return
+            if (characteristic.uuid == CHAR_CONFIG_UUID) {
+                val json = value.toString(Charsets.UTF_8)
+                val cfg = runCatching { gson.fromJson(json, TagConfig::class.java) }.getOrNull() ?: return
+                mainHandler.post { populateFields(cfg) }
+            }
+        }
+
+        override fun onCharacteristicWrite(
+            g: BluetoothGatt,
+            characteristic: BluetoothGattCharacteristic,
+            status: Int
+        ) {
+            val msg = if (status == BluetoothGatt.GATT_SUCCESS) "Config written" else "Write failed ($status)"
+            mainHandler.post { toast(msg) }
+        }
+
+        override fun onCharacteristicChanged(
+            g: BluetoothGatt,
+            characteristic: BluetoothGattCharacteristic
+        ) {
+            val value = characteristic.value ?: return
+            handleNotification(characteristic.uuid, value)
+        }
+
+        // API 33+ callback
+        override fun onCharacteristicChanged(
+            g: BluetoothGatt,
+            characteristic: BluetoothGattCharacteristic,
+            value: ByteArray
+        ) {
+            handleNotification(characteristic.uuid, value)
+        }
+    }
+
+    // ---------------------------------------------------------------------------
+    // Notification helpers
+    // ---------------------------------------------------------------------------
+    private fun enableNotifications(g: BluetoothGatt, char: BluetoothGattCharacteristic) {
+        g.setCharacteristicNotification(char, true)
+        val descriptor = char.getDescriptor(CCCD_UUID) ?: return
+        descriptor.value = BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE
+        g.writeDescriptor(descriptor)
+    }
+
+    private fun handleNotification(uuid: UUID, value: ByteArray) {
+        val text = value.toString(Charsets.UTF_8)
+        mainHandler.post {
+            when (uuid) {
+                CHAR_STATUS_UUID -> binding.tvTagStatus.text = "Status: $text"
+                CHAR_BATT_UUID   -> {
+                    val pct = text.toIntOrNull() ?: return@post
+                    binding.tvTagStatus.text = binding.tvTagStatus.text.toString()
+                        .replace(Regex("\\| Batt:.*"), "")
+                        .trimEnd() + " | Batt: $pct%"
+                }
+            }
+        }
+    }
+
+    // ---------------------------------------------------------------------------
+    // Config read / write
+    // ---------------------------------------------------------------------------
+    private fun readConfig() {
+        val g = gatt ?: run { toast("Not connected"); return }
+        val c = configChar ?: run { toast("Config char not found"); return }
+        g.readCharacteristic(c)
+    }
+
+    private fun writeConfig() {
+        val g = gatt ?: run { toast("Not connected"); return }
+        val c = configChar ?: run { toast("Config char not found"); return }
+        val cfg = buildConfigFromFields()
+        val json = gson.toJson(cfg)
+        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.TIRAMISU) {
+            g.writeCharacteristic(c, json.toByteArray(Charsets.UTF_8),
+                BluetoothGattCharacteristic.WRITE_TYPE_DEFAULT)
+        } else {
+            @Suppress("DEPRECATION")
+            c.value = json.toByteArray(Charsets.UTF_8)
+            @Suppress("DEPRECATION")
+            g.writeCharacteristic(c)
+        }
+    }
+
+    // ---------------------------------------------------------------------------
+    // UI helpers
+    // ---------------------------------------------------------------------------
+    private fun populateFields(cfg: TagConfig) {
+        binding.etTagName.setText(cfg.tag_name)
+        binding.etSleepTimeout.setText(cfg.sleep_timeout_s.toString())
+        binding.etBrightness.setText(cfg.display_brightness.toString())
+        binding.etUwbChannel.setText(cfg.uwb_channel.toString())
+        binding.etRangingInterval.setText(cfg.ranging_interval_ms.toString())
+        binding.switchBatteryReport.isChecked = cfg.battery_report
+    }
+
+    private fun buildConfigFromFields() = TagConfig(
+        tag_name           = binding.etTagName.text?.toString() ?: "UWB_TAG_0001",
+        sleep_timeout_s    = binding.etSleepTimeout.text?.toString()?.toIntOrNull() ?: 300,
+        display_brightness = binding.etBrightness.text?.toString()?.toIntOrNull() ?: 50,
+        uwb_channel        = binding.etUwbChannel.text?.toString()?.toIntOrNull() ?: 9,
+        ranging_interval_ms = binding.etRangingInterval.text?.toString()?.toIntOrNull() ?: 100,
+        battery_report     = binding.switchBatteryReport.isChecked
+    )
+
+    private fun toast(msg: String) =
+        Toast.makeText(this, msg, Toast.LENGTH_SHORT).show()
+}

android/src/main/res/layout/activity_uwb_tag_ble.xml

@@ -0,0 +1,238 @@
+<?xml version="1.0" encoding="utf-8"?>
+<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:app="http://schemas.android.com/apk/res-auto"
+    android:layout_width="match_parent"
+    android:layout_height="match_parent"
+    android:orientation="vertical">
+
+    <androidx.appcompat.widget.Toolbar
+        android:id="@+id/toolbar"
+        android:layout_width="match_parent"
+        android:layout_height="?attr/actionBarSize"
+        android:background="?attr/colorPrimary"
+        android:elevation="4dp"
+        android:theme="@style/ThemeOverlay.AppCompat.Dark.ActionBar"
+        app:title="UWB Tag BLE Config" />
+
+    <!-- Scan controls -->
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:padding="12dp"
+        android:gravity="center_vertical">
+
+        <Button
+            android:id="@+id/btnScan"
+            style="@style/Widget.MaterialComponents.Button"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:text="Scan" />
+
+        <TextView
+            android:id="@+id/tvScanStatus"
+            android:layout_width="0dp"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:layout_marginStart="12dp"
+            android:text="Tap Scan to find UWB tags"
+            android:textAppearance="@style/TextAppearance.MaterialComponents.Body2" />
+
+    </LinearLayout>
+
+    <!-- Scan results list -->
+    <TextView
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:paddingHorizontal="12dp"
+        android:text="Nearby Tags"
+        android:textAppearance="@style/TextAppearance.MaterialComponents.Subtitle1"
+        android:textStyle="bold" />
+
+    <androidx.recyclerview.widget.RecyclerView
+        android:id="@+id/rvDevices"
+        android:layout_width="match_parent"
+        android:layout_height="0dp"
+        android:layout_weight="1"
+        android:padding="8dp"
+        android:clipToPadding="false" />
+
+    <!-- Connected device config panel -->
+    <com.google.android.material.card.MaterialCardView
+        android:id="@+id/cardConfig"
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:layout_margin="8dp"
+        android:visibility="gone"
+        app:cardElevation="4dp">
+
+        <LinearLayout
+            android:layout_width="match_parent"
+            android:layout_height="wrap_content"
+            android:orientation="vertical"
+            android:padding="12dp">
+
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:gravity="center_vertical">
+
+                <TextView
+                    android:id="@+id/tvConnectedName"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:text="Connected: —"
+                    android:textAppearance="@style/TextAppearance.MaterialComponents.Subtitle1"
+                    android:textStyle="bold" />
+
+                <Button
+                    android:id="@+id/btnDisconnect"
+                    style="@style/Widget.MaterialComponents.Button.OutlinedButton"
+                    android:layout_width="wrap_content"
+                    android:layout_height="wrap_content"
+                    android:text="Disconnect" />
+
+            </LinearLayout>
+
+            <!-- tag_name -->
+            <com.google.android.material.textfield.TextInputLayout
+                style="@style/Widget.MaterialComponents.TextInputLayout.OutlinedBox.Dense"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="8dp"
+                android:hint="Tag Name">
+                <com.google.android.material.textfield.TextInputEditText
+                    android:id="@+id/etTagName"
+                    android:layout_width="match_parent"
+                    android:layout_height="wrap_content"
+                    android:inputType="text" />
+            </com.google.android.material.textfield.TextInputLayout>
+
+            <!-- sleep_timeout_s and uwb_channel (row) -->
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:layout_marginTop="4dp">
+
+                <com.google.android.material.textfield.TextInputLayout
+                    style="@style/Widget.MaterialComponents.TextInputLayout.OutlinedBox.Dense"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:layout_marginEnd="4dp"
+                    android:hint="Sleep Timeout (s)">
+                    <com.google.android.material.textfield.TextInputEditText
+                        android:id="@+id/etSleepTimeout"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        android:inputType="number" />
+                </com.google.android.material.textfield.TextInputLayout>
+
+                <com.google.android.material.textfield.TextInputLayout
+                    style="@style/Widget.MaterialComponents.TextInputLayout.OutlinedBox.Dense"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:layout_marginStart="4dp"
+                    android:hint="UWB Channel">
+                    <com.google.android.material.textfield.TextInputEditText
+                        android:id="@+id/etUwbChannel"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        android:inputType="number" />
+                </com.google.android.material.textfield.TextInputLayout>
+
+            </LinearLayout>
+
+            <!-- display_brightness and ranging_interval_ms (row) -->
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:layout_marginTop="4dp">
+
+                <com.google.android.material.textfield.TextInputLayout
+                    style="@style/Widget.MaterialComponents.TextInputLayout.OutlinedBox.Dense"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:layout_marginEnd="4dp"
+                    android:hint="Brightness (0-100)">
+                    <com.google.android.material.textfield.TextInputEditText
+                        android:id="@+id/etBrightness"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        android:inputType="number" />
+                </com.google.android.material.textfield.TextInputLayout>
+
+                <com.google.android.material.textfield.TextInputLayout
+                    style="@style/Widget.MaterialComponents.TextInputLayout.OutlinedBox.Dense"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:layout_marginStart="4dp"
+                    android:hint="Ranging Interval (ms)">
+                    <com.google.android.material.textfield.TextInputEditText
+                        android:id="@+id/etRangingInterval"
+                        android:layout_width="match_parent"
+                        android:layout_height="wrap_content"
+                        android:inputType="number" />
+                </com.google.android.material.textfield.TextInputLayout>
+
+            </LinearLayout>
+
+            <!-- battery_report toggle -->
+            <com.google.android.material.switchmaterial.SwitchMaterial
+                android:id="@+id/switchBatteryReport"
+                android:layout_width="wrap_content"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="8dp"
+                android:text="Battery Reporting" />
+
+            <!-- Action buttons -->
+            <LinearLayout
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:orientation="horizontal"
+                android:layout_marginTop="8dp">
+
+                <Button
+                    android:id="@+id/btnReadConfig"
+                    style="@style/Widget.MaterialComponents.Button.OutlinedButton"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:layout_marginEnd="4dp"
+                    android:text="Read" />
+
+                <Button
+                    android:id="@+id/btnWriteConfig"
+                    style="@style/Widget.MaterialComponents.Button"
+                    android:layout_width="0dp"
+                    android:layout_height="wrap_content"
+                    android:layout_weight="1"
+                    android:layout_marginStart="4dp"
+                    android:text="Write" />
+
+            </LinearLayout>
+
+            <!-- Status notifications from tag -->
+            <TextView
+                android:id="@+id/tvTagStatus"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:layout_marginTop="8dp"
+                android:background="#1A000000"
+                android:fontFamily="monospace"
+                android:padding="8dp"
+                android:text="Tag status: —"
+                android:textAppearance="@style/TextAppearance.MaterialComponents.Caption" />
+
+        </LinearLayout>
+
+    </com.google.android.material.card.MaterialCardView>
+
+</LinearLayout>

android/src/main/res/layout/item_ble_device.xml

@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<com.google.android.material.card.MaterialCardView
+    xmlns:android="http://schemas.android.com/apk/res/android"
+    xmlns:app="http://schemas.android.com/apk/res-auto"
+    android:layout_width="match_parent"
+    android:layout_height="wrap_content"
+    android:layout_margin="4dp"
+    app:cardElevation="2dp"
+    android:clickable="true"
+    android:focusable="true">
+
+    <LinearLayout
+        android:layout_width="match_parent"
+        android:layout_height="wrap_content"
+        android:orientation="horizontal"
+        android:padding="12dp"
+        android:gravity="center_vertical">
+
+        <LinearLayout
+            android:layout_width="0dp"
+            android:layout_height="wrap_content"
+            android:layout_weight="1"
+            android:orientation="vertical">
+
+            <TextView
+                android:id="@+id/tvDeviceName"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:text="UWB_TAG_XXXX"
+                android:textAppearance="@style/TextAppearance.MaterialComponents.Subtitle2"
+                android:textStyle="bold" />
+
+            <TextView
+                android:id="@+id/tvDeviceAddress"
+                android:layout_width="match_parent"
+                android:layout_height="wrap_content"
+                android:text="XX:XX:XX:XX:XX:XX"
+                android:textAppearance="@style/TextAppearance.MaterialComponents.Caption" />
+
+        </LinearLayout>
+
+        <TextView
+            android:id="@+id/tvRssi"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:text="-70 dBm"
+            android:textAppearance="@style/TextAppearance.MaterialComponents.Caption"
+            android:textColor="?attr/colorSecondary" />
+
+        <Button
+            android:id="@+id/btnConnect"
+            style="@style/Widget.MaterialComponents.Button.OutlinedButton"
+            android:layout_width="wrap_content"
+            android:layout_height="wrap_content"
+            android:layout_marginStart="8dp"
+            android:text="Connect" />
+
+    </LinearLayout>
+
+</com.google.android.material.card.MaterialCardView>

chassis/vesc_mount.scad

@@ -0,0 +1,296 @@
+// ============================================================
+// vesc_mount.scad — FSESC 6.7 Pro Mini Dual ESC Mount Cradle
+// Issue #699 / sl-mechanical  2026-03-17
+// ============================================================
+// Open-top tray for Flipsky FSESC 6.7 Pro Mini Dual (~100 × 68 × 28 mm).
+// Attaches to 2020 aluminium T-slot rail via 4× M5 T-nuts
+// (2× per rail, two parallel rails, 60 mm bolt spacing in X,
+//  20 mm bolt spacing in Y matching 2020 slot pitch).
+//
+// Connector access:
+//   XT60 battery inputs    — X− end wall cutouts (2 connectors, side-by-side)
+//   XT30 motor outputs     — Y+ and Y− side wall cutouts (2 per side wall)
+//   CAN/UART terminal      — X+ end wall cutout (screw terminal, wire exit)
+//
+// Ventilation:
+//   Open top face          — heatsink fins fully exposed
+//   Floor grille slots     — under-board airflow
+//   Side vent louvres      — 4 slots on each Y± wall at heatsink height
+//
+// Retention: 4× M3 heat-set insert boss in floor — board screws down through
+// ESC mounting holes via M3×8 FHCS. Board sits on 4 mm raised posts for
+// under-board airflow.
+//
+// ⚠  VERIFY WITH CALIPERS BEFORE PRINTING:
+//    PCB_L, PCB_W                   board outline
+//    XT60_W, XT60_H                 XT60 shell at X− edge
+//    XT30_W, XT30_H                 XT30 shells at Y± edges
+//    TERM_W, TERM_H                 CAN screw terminal at X+ edge
+//    MOUNT_X1/X2, MOUNT_Y1/Y2      ESC board mounting hole pattern
+//
+// Print settings (PETG):
+//   3 perimeters, 40 % gyroid infill, no supports, 0.2 mm layer
+//   Print orientation: open face UP (as modelled)
+//
+// BOM:
+//   4 × M5×10 BHCS  +  4 × M5 slide-in T-nut  (2020 rail)
+//   4 × M3 heat-set insert (Voron-style, OD 4.5 mm × 4 mm deep)
+//   4 × M3×8 FHCS  (board retention)
+//
+// Export commands:
+//   openscad -D 'RENDER="mount"'    -o vesc_mount.stl    vesc_mount.scad
+//   openscad -D 'RENDER="assembly"' -o vesc_assembly.png vesc_mount.scad
+// ============================================================
+
+RENDER = "assembly"; // mount | assembly
+
+$fn = 48;
+EPS = 0.01;
+
+// ── ⚠ Verify before printing ─────────────────────────────────
+// FSESC 6.7 Pro Mini Dual PCB
+PCB_L    = 100.0;  // board length (X: XT60 end → CAN terminal end)
+PCB_W    =  68.0;  // board width  (Y)
+PCB_T    =  2.0;   // board thickness (incl. bottom-side components)
+COMP_H   =  26.0;  // tallest component above board top face (heatsink ~26 mm)
+
+// XT60 battery connectors at X− end (2 connectors, side-by-side)
+XT60_W   =  16.0;  // each XT60 shell width (Y)
+XT60_H   =  16.0;  // each XT60 shell height (Z) above board surface
+XT60_Z0  =   0.0;  // connector bottom offset above board surface
+// Y centres of each XT60 measured from PCB Y− edge
+XT60_Y1  =  16.0;
+XT60_Y2  =  52.0;
+
+// XT30 motor output connectors at Y± sides (2 per side)
+XT30_W   =  10.5;  // each XT30 shell width (X span)
+XT30_H   =  12.0;  // each XT30 shell height (Z) above board surface
+XT30_Z0  =   0.5;  // connector bottom offset above board surface
+// X centres measured from PCB X− edge (same layout both Y− and Y+ sides)
+XT30_X1  =  22.0;
+XT30_X2  =  78.0;
+
+// CAN / UART screw terminal block at X+ end (3-pos 3.5 mm pitch)
+TERM_W   =  14.0;  // terminal block Y span
+TERM_H   =  10.0;  // terminal block height above board surface
+TERM_Z0  =   0.5;  // terminal bottom offset above board surface
+TERM_Y_CTR = PCB_W / 2;
+
+// ── ESC board mounting hole pattern ──────────────────────────
+// 4 corner holes, 4 mm inset from each PCB edge
+MOUNT_INSET  =  4.0;
+MOUNT_X1     = MOUNT_INSET;
+MOUNT_X2     = PCB_L - MOUNT_INSET;
+MOUNT_Y1     = MOUNT_INSET;
+MOUNT_Y2     = PCB_W - MOUNT_INSET;
+
+M3_INSERT_OD =  4.6;   // Voron M3 heat-set insert press-fit OD
+M3_INSERT_H  =  4.0;   // insert depth
+M3_CLEAR_D   =  3.4;   // M3 clearance bore below insert
+
+// ── Cradle geometry ──────────────────────────────────────────
+WALL_T   =  2.8;   // side / end wall thickness
+FLOOR_T  =  4.5;   // floor plate thickness (fits M5 BHCS head pocket)
+POST_H   =  4.0;   // standoff post height (board lifts off floor for airflow)
+CL_SIDE  =  0.35;  // Y clearance per side
+CL_END   =  0.40;  // X clearance per end
+
+INN_W    = PCB_W + 2*CL_SIDE;
+INN_L    = PCB_L + 2*CL_END;
+INN_H    = POST_H + PCB_T + COMP_H + 1.5;
+
+OTR_W    = INN_W  + 2*WALL_T;
+OTR_L    = INN_L  + 2*WALL_T;
+OTR_H    = FLOOR_T + INN_H;
+
+PCB_X0   = WALL_T + CL_END;
+PCB_Y0   = WALL_T + CL_SIDE;
+PCB_Z0   = FLOOR_T + POST_H;
+
+// ── M5 T-nut mount (2020 rail) ────────────────────────────────
+// 4 bolts: 2 columns (X) × 2 rows (Y), centred on body
+M5_D       =  5.3;
+M5_HEAD_D  =  9.5;
+M5_HEAD_H  =  3.0;
+M5_SPAC_X  = 60.0;   // X bolt spacing
+M5_SPAC_Y  = 20.0;   // Y bolt spacing (2020 T-slot pitch)
+
+// ── Floor ventilation grille ──────────────────────────────────
+GRILLE_SLOT_W =  4.0;
+GRILLE_SLOT_T = FLOOR_T - 1.5;
+GRILLE_PITCH  = 10.0;
+GRILLE_X0     = WALL_T + 14;
+GRILLE_X_LEN  = OTR_L - 2*WALL_T - 28;
+GRILLE_N      = floor((INN_W - 10) / GRILLE_PITCH);
+
+// ── Side vent louvres on Y± walls ────────────────────────────
+LOUV_H     =  5.0;
+LOUV_W     = 12.0;
+LOUV_Z     = FLOOR_T + POST_H + PCB_T + 4.0;  // mid-heatsink height
+LOUV_N     =  4;
+LOUV_PITCH = (OTR_L - 2*WALL_T - 20) / max(LOUV_N - 1, 1);
+
+// ── CAN wire strain relief bosses (X+ end) ───────────────────
+SR_BOSS_OD =  7.0;
+SR_BOSS_H  =  6.0;
+SR_SLOT_W  =  3.5;
+SR_SLOT_T  =  2.2;
+SR_Y1      = WALL_T + INN_W * 0.25;
+SR_Y2      = WALL_T + INN_W * 0.75;
+SR_X       = OTR_L - WALL_T - SR_BOSS_OD/2 - 2.5;
+
+// ─────────────────────────────────────────────────────────────
+module m3_insert_boss() {
+    // Solid post with heat-set insert bore from top
+    post_h = FLOOR_T + POST_H;
+    difference() {
+        cylinder(d = M3_INSERT_OD + 3.2, h = post_h);
+        // Insert bore from top
+        translate([0, 0, post_h - M3_INSERT_H])
+            cylinder(d = M3_INSERT_OD, h = M3_INSERT_H + EPS);
+        // Clearance bore from bottom
+        translate([0, 0, -EPS])
+            cylinder(d = M3_CLEAR_D, h = post_h - M3_INSERT_H + EPS);
+    }
+}
+
+module vesc_mount() {
+    difference() {
+        union() {
+            // Main body
+            cube([OTR_L, OTR_W, OTR_H]);
+
+            // M3 insert bosses at board mounting corners
+            for (mx = [MOUNT_X1, MOUNT_X2])
+            for (my = [MOUNT_Y1, MOUNT_Y2])
+                translate([PCB_X0 + mx, PCB_Y0 + my, 0])
+                    m3_insert_boss();
+
+            // CAN strain relief bosses on X+ end
+            for (sy = [SR_Y1, SR_Y2])
+                translate([SR_X, sy, 0])
+                    cylinder(d = SR_BOSS_OD, h = SR_BOSS_H);
+        }
+
+        // ── Interior cavity (open top) ─────────────────────────
+        translate([WALL_T, WALL_T, FLOOR_T])
+            cube([INN_L, INN_W, INN_H + EPS]);
+
+        // ── XT60 cutouts at X− end (2 connectors) ──────────────
+        for (yc = [XT60_Y1, XT60_Y2])
+            translate([-EPS,
+                       PCB_Y0 + yc - (XT60_W + 2.0)/2,
+                       PCB_Z0 + XT60_Z0 - 0.5])
+                cube([WALL_T + 2*EPS, XT60_W + 2.0, XT60_H + 3.0]);
+
+        // ── XT30 cutouts at Y− side (2 connectors) ─────────────
+        for (xc = [XT30_X1, XT30_X2])
+            translate([PCB_X0 + xc - (XT30_W + 2.0)/2,
+                       -EPS,
+                       PCB_Z0 + XT30_Z0 - 0.5])
+                cube([XT30_W + 2.0, WALL_T + 2*EPS, XT30_H + 3.0]);
+
+        // ── XT30 cutouts at Y+ side (2 connectors) ─────────────
+        for (xc = [XT30_X1, XT30_X2])
+            translate([PCB_X0 + xc - (XT30_W + 2.0)/2,
+                       OTR_W - WALL_T - EPS,
+                       PCB_Z0 + XT30_Z0 - 0.5])
+                cube([XT30_W + 2.0, WALL_T + 2*EPS, XT30_H + 3.0]);
+
+        // ── CAN terminal cutout at X+ end ──────────────────────
+        translate([OTR_L - WALL_T - EPS,
+                   PCB_Y0 + TERM_Y_CTR - (TERM_W + 3.0)/2,
+                   PCB_Z0 + TERM_Z0 - 0.5])
+            cube([WALL_T + 2*EPS, TERM_W + 3.0, TERM_H + 5.0]);
+
+        // ── Floor ventilation grille ───────────────────────────
+        for (i = [0 : GRILLE_N - 1]) {
+            sy = WALL_T + 5 + i * GRILLE_PITCH;
+            translate([GRILLE_X0, sy, -EPS])
+                cube([GRILLE_X_LEN, GRILLE_SLOT_W, GRILLE_SLOT_T + EPS]);
+        }
+
+        // ── Side vent louvres — Y− wall ────────────────────────
+        for (i = [0 : LOUV_N - 1]) {
+            lx = WALL_T + 10 + i * LOUV_PITCH;
+            translate([lx, -EPS, LOUV_Z])
+                cube([LOUV_W, WALL_T + 2*EPS, LOUV_H]);
+        }
+
+        // ── Side vent louvres — Y+ wall ────────────────────────
+        for (i = [0 : LOUV_N - 1]) {
+            lx = WALL_T + 10 + i * LOUV_PITCH;
+            translate([lx, OTR_W - WALL_T - EPS, LOUV_Z])
+                cube([LOUV_W, WALL_T + 2*EPS, LOUV_H]);
+        }
+
+        // ── M5 BHCS head pockets (4 bolts, bottom face) ────────
+        for (mx = [OTR_L/2 - M5_SPAC_X/2, OTR_L/2 + M5_SPAC_X/2])
+        for (my = [OTR_W/2 - M5_SPAC_Y/2, OTR_W/2 + M5_SPAC_Y/2])
+            translate([mx, my, -EPS]) {
+                cylinder(d = M5_D,      h = FLOOR_T + 2*EPS);
+                cylinder(d = M5_HEAD_D, h = M5_HEAD_H + EPS);
+            }
+
+        // ── Zip-tie slots through CAN strain relief bosses ─────
+        for (sy = [SR_Y1, SR_Y2])
+            translate([SR_X, sy, SR_BOSS_H/2 - SR_SLOT_T/2])
+                rotate([0, 90, 0])
+                    cube([SR_SLOT_T, SR_SLOT_W, SR_BOSS_OD + 2*EPS],
+                         center = true);
+
+        // ── Weight-relief pocket in floor underside ─────────────
+        translate([WALL_T + 16, WALL_T + 6, -EPS])
+            cube([OTR_L - 2*WALL_T - 32, OTR_W - 2*WALL_T - 12,
+                  FLOOR_T - 2.0 + EPS]);
+    }
+}
+
+// ── Assembly preview ─────────────────────────────────────────
+if (RENDER == "assembly") {
+    color("DimGray", 0.93) vesc_mount();
+
+    // Phantom PCB
+    color("ForestGreen", 0.30)
+        translate([PCB_X0, PCB_Y0, PCB_Z0])
+            cube([PCB_L, PCB_W, PCB_T]);
+
+    // Phantom heatsink / component block
+    color("SlateGray", 0.22)
+        translate([PCB_X0, PCB_Y0, PCB_Z0 + PCB_T])
+            cube([PCB_L, PCB_W, COMP_H]);
+
+    // XT60 connector highlights (X− end)
+    for (yc = [XT60_Y1, XT60_Y2])
+        color("Gold", 0.85)
+            translate([-2,
+                       PCB_Y0 + yc - XT60_W/2,
+                       PCB_Z0 + XT60_Z0])
+                cube([WALL_T + 3, XT60_W, XT60_H]);
+
+    // XT30 connector highlights — Y− side
+    for (xc = [XT30_X1, XT30_X2])
+        color("OrangeRed", 0.80)
+            translate([PCB_X0 + xc - XT30_W/2,
+                       -2,
+                       PCB_Z0 + XT30_Z0])
+                cube([XT30_W, WALL_T + 3, XT30_H]);
+
+    // XT30 connector highlights — Y+ side
+    for (xc = [XT30_X1, XT30_X2])
+        color("OrangeRed", 0.80)
+            translate([PCB_X0 + xc - XT30_W/2,
+                       OTR_W - WALL_T - 1,
+                       PCB_Z0 + XT30_Z0])
+                cube([XT30_W, WALL_T + 3, XT30_H]);
+
+    // CAN terminal highlight
+    color("Tomato", 0.75)
+        translate([OTR_L - WALL_T - 1,
+                   PCB_Y0 + TERM_Y_CTR - TERM_W/2,
+                   PCB_Z0 + TERM_Z0])
+            cube([WALL_T + 3, TERM_W, TERM_H]);
+
+} else {
+    vesc_mount();
+}

jetson/ros2_ws/src/saltybot_bringup/config/rosbridge_params.yaml

@@ -49,6 +49,9 @@ rosbridge_websocket:
        "/cmd_vel",
        "/saltybot/imu",
        "/saltybot/balance_state",
+       "/saltybot/barometer",
+       "/vesc/left/state",
+       "/vesc/right/state",
        "/tf",
        "/tf_static"]
 

jetson/ros2_ws/src/saltybot_bringup/launch/can_monitor.launch.py

@@ -0,0 +1,70 @@
+"""
+can_monitor.launch.py — Lightweight rosbridge server for CAN sensor dashboard (Issue #697)
+
+Starts rosbridge_websocket on port 9090 with a whitelist limited to the five
+topics consumed by can_monitor_panel.html:
+
+  /saltybot/imu           sensor_msgs/Imu           — IMU attitude
+  /saltybot/balance_state std_msgs/String (JSON)    — balance PID state
+  /saltybot/barometer     std_msgs/String (JSON)    — pressure / temp / altitude
+  /vesc/left/state        std_msgs/String (JSON)    — left VESC telemetry
+  /vesc/right/state       std_msgs/String (JSON)    — right VESC telemetry
+
+Usage:
+  ros2 launch saltybot_bringup can_monitor.launch.py
+
+  # Override port if needed:
+  ros2 launch saltybot_bringup can_monitor.launch.py port:=9091
+
+Verify:
+  # From a browser on the same LAN:
+  #   var ros = new ROSLIB.Ros({ url: 'ws://<jetson-ip>:9090' });
+  #   ros.on('connection', () => console.log('connected'));
+"""
+
+import os
+from launch import LaunchDescription
+from launch.actions import DeclareLaunchArgument
+from launch.substitutions import LaunchConfiguration
+from launch_ros.actions import Node
+
+
+# Topics exposed to the CAN monitor WebUI panel.
+_TOPICS = [
+    '/saltybot/imu',
+    '/saltybot/balance_state',
+    '/saltybot/barometer',
+    '/vesc/left/state',
+    '/vesc/right/state',
+]
+
+_TOPICS_GLOB = '[' + ', '.join(f'"{t}"' for t in _TOPICS) + ']'
+
+
+def generate_launch_description():
+    port_arg = DeclareLaunchArgument(
+        'port',
+        default_value='9090',
+        description='WebSocket port for rosbridge (default 9090)',
+    )
+
+    rosbridge = Node(
+        package='rosbridge_server',
+        executable='rosbridge_websocket',
+        name='rosbridge_websocket',
+        parameters=[{
+            'port':               LaunchConfiguration('port'),
+            'host':               '0.0.0.0',
+            'authenticate':       False,
+            'max_message_size':   1000000,    # 1 MB — no large map payloads needed
+            'topics_glob':        _TOPICS_GLOB,
+            'services_glob':      '[]',
+            'params_glob':        '[]',
+            'unregister_timeout': 10.0,
+            'fragment_timeout':   600,
+            'delay_between_messages': 0,
+        }],
+        output='screen',
+    )
+
+    return LaunchDescription([port_arg, rosbridge])

jetson/ros2_ws/src/saltybot_can_e2e_test/package.xml

@@ -0,0 +1,33 @@
+<?xml version="1.0"?>
+<?xml-model href="http://download.ros.org/schema/package_format3.xsd" schematypens="http://www.w3.org/2001/XMLSchema"?>
+<package format="3">
+  <name>saltybot_can_e2e_test</name>
+  <version>0.1.0</version>
+  <description>
+    End-to-end CAN integration test suite for the SaltyBot Orin↔Mamba↔VESC full loop.
+
+    Tests verify the complete CAN pipeline: drive commands, heartbeat timeout,
+    e-stop escalation, mode switching, and FC_VESC status broadcasts.
+
+    No real hardware or a running ROS2 system is required.
+    Run with: python -m pytest test/ -v
+
+    Issue: https://gitea.vayrette.com/seb/saltylab-firmware/issues/695
+  </description>
+  <maintainer email="sl-jetson@saltylab.local">sl-jetson</maintainer>
+  <license>MIT</license>
+
+  <!-- Runtime dependency on saltybot_can_bridge for mamba_protocol -->
+  <exec_depend>saltybot_can_bridge</exec_depend>
+
+  <buildtool_depend>ament_python</buildtool_depend>
+
+  <test_depend>ament_copyright</test_depend>
+  <test_depend>ament_flake8</test_depend>
+  <test_depend>ament_pep257</test_depend>
+  <test_depend>python3-pytest</test_depend>
+
+  <export>
+    <build_type>ament_python</build_type>
+  </export>
+</package>

jetson/ros2_ws/src/saltybot_can_e2e_test/saltybot_can_e2e_test/__init__.py

@@ -0,0 +1 @@
+# saltybot_can_e2e_test — End-to-end CAN integration test helpers

jetson/ros2_ws/src/saltybot_can_e2e_test/saltybot_can_e2e_test/can_mock.py

@@ -0,0 +1,160 @@
+#!/usr/bin/env python3
+"""
+can_mock.py — Mock CAN bus for unit/integration tests.
+
+Implements the same minimal interface as python-can's Bus class so test code
+can inject frames and capture outbound traffic without real hardware or a
+running SocketCAN interface.
+
+Interface
+---------
+  MockCANBus.send(msg, timeout=None)     — capture frame; if loopback, also enqueue for recv
+  MockCANBus.recv(timeout=None)          — return next injected frame (or None on timeout)
+  MockCANBus.inject(arb_id, data,        — queue a frame as if received from the bus
+                    is_extended_id=False)
+  MockCANBus.get_sent_frames()           — return copy of all sent frames list
+  MockCANBus.reset()                     — clear all state
+  MockCANBus.shutdown()                  — mark as shut down
+"""
+
+import queue
+import threading
+import time
+from typing import List, Optional
+
+try:
+    import can
+    _Message = can.Message
+except ImportError:
+    # Lightweight stand-in when python-can is not installed
+    class _Message:  # type: ignore[no-redef]
+        def __init__(
+            self,
+            arbitration_id: int = 0,
+            data: bytes = b"",
+            is_extended_id: bool = False,
+            timestamp: Optional[float] = None,
+        ) -> None:
+            self.arbitration_id = arbitration_id
+            self.data = bytearray(data)
+            self.is_extended_id = is_extended_id
+            self.timestamp = timestamp if timestamp is not None else time.monotonic()
+
+
+class MockCANBus:
+    """
+    Thread-safe mock CAN bus.
+
+    Parameters
+    ----------
+    loopback: bool
+        When True, every frame passed to send() is also placed in the recv
+        queue, simulating a loopback interface.
+    filters: list[dict] or None
+        Optional list of {"can_id": int, "can_mask": int} dicts.  Only frames
+        matching at least one filter are returned by recv().  If None, all
+        frames are returned.
+    """
+
+    def __init__(self, loopback: bool = False, filters=None) -> None:
+        self._loopback = loopback
+        self._filters = filters
+        self._recv_q: queue.Queue = queue.Queue()
+        self._sent: List[_Message] = []
+        self._sent_lock = threading.Lock()
+        self._shutdown = False
+
+    # ------------------------------------------------------------------
+    # python-can Bus interface (subset used by CanBridgeNode)
+    # ------------------------------------------------------------------
+
+    def send(self, msg, timeout: Optional[float] = None) -> None:
+        """Record an outbound frame.  If loopback is enabled, also enqueue it."""
+        if self._shutdown:
+            raise RuntimeError("MockCANBus is shut down")
+        # Normalise to _Message so callers can pass any object with the right attrs
+        with self._sent_lock:
+            self._sent.append(msg)
+        if self._loopback:
+            self._recv_q.put(msg)
+
+    def recv(self, timeout: Optional[float] = None) -> Optional[_Message]:
+        """
+        Return the next injected frame.  Blocks up to timeout seconds.
+        Returns None if nothing arrives within the timeout.
+        """
+        if self._shutdown:
+            return None
+        try:
+            return self._recv_q.get(block=True, timeout=timeout)
+        except queue.Empty:
+            return None
+
+    def shutdown(self) -> None:
+        """Mark the bus as shut down; subsequent recv() returns None."""
+        self._shutdown = True
+
+    # ------------------------------------------------------------------
+    # Test helpers
+    # ------------------------------------------------------------------
+
+    def inject(
+        self,
+        arbitration_id: int,
+        data: bytes,
+        is_extended_id: bool = False,
+        timestamp: Optional[float] = None,
+    ) -> None:
+        """
+        Inject a frame into the receive queue as if it arrived from the bus.
+
+        Parameters
+        ----------
+        arbitration_id: CAN arbitration ID
+        data: frame payload bytes
+        is_extended_id: True for 29-bit extended frames (VESC style)
+        timestamp: optional monotonic timestamp; defaults to time.monotonic()
+        """
+        msg = _Message(
+            arbitration_id=arbitration_id,
+            data=data,
+            is_extended_id=is_extended_id,
+            timestamp=timestamp if timestamp is not None else time.monotonic(),
+        )
+        self._recv_q.put(msg)
+
+    def get_sent_frames(self) -> List[_Message]:
+        """Return a snapshot of all frames sent through this bus."""
+        with self._sent_lock:
+            return list(self._sent)
+
+    def get_sent_frames_by_id(self, arbitration_id: int) -> List[_Message]:
+        """Return only sent frames whose arbitration_id matches."""
+        with self._sent_lock:
+            return [f for f in self._sent if f.arbitration_id == arbitration_id]
+
+    def reset(self) -> None:
+        """Clear all sent frames and drain the receive queue."""
+        with self._sent_lock:
+            self._sent.clear()
+        while not self._recv_q.empty():
+            try:
+                self._recv_q.get_nowait()
+            except queue.Empty:
+                break
+        self._shutdown = False
+
+    def pending_recv(self) -> int:
+        """Return the number of frames waiting in the receive queue."""
+        return self._recv_q.qsize()
+
+    # ------------------------------------------------------------------
+    # Context manager support
+    # ------------------------------------------------------------------
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        self.shutdown()
+        return False

jetson/ros2_ws/src/saltybot_can_e2e_test/saltybot_can_e2e_test/protocol_defs.py

@@ -0,0 +1,314 @@
+#!/usr/bin/env python3
+"""
+protocol_defs.py — CAN message ID constants and frame builders/parsers for the
+Orin↔Mamba↔VESC integration test suite.
+
+All IDs and payload formats are derived from:
+  include/orin_can.h   — Orin↔FC (Mamba) protocol
+  include/vesc_can.h   — VESC CAN protocol
+  saltybot_can_bridge/mamba_protocol.py — existing bridge constants
+
+CAN IDs used in tests
+---------------------
+Orin → FC (Mamba) commands (standard 11-bit, matching orin_can.h):
+  ORIN_CMD_HEARTBEAT  0x300
+  ORIN_CMD_DRIVE      0x301    int16 speed (−1000..+1000), int16 steer (−1000..+1000)
+  ORIN_CMD_MODE       0x302    uint8 mode byte
+  ORIN_CMD_ESTOP      0x303    uint8 action (1=ESTOP, 0=CLEAR)
+
+FC (Mamba) → Orin telemetry (standard 11-bit, matching orin_can.h):
+  FC_STATUS           0x400    8 bytes (see orin_can_fc_status_t)
+  FC_VESC             0x401    8 bytes (see orin_can_fc_vesc_t)
+  FC_IMU              0x402    8 bytes
+  FC_BARO             0x403    8 bytes
+
+Mamba ↔ VESC internal commands (matching mamba_protocol.py):
+  MAMBA_CMD_VELOCITY  0x100    8 bytes  left_mps (f32) | right_mps (f32) big-endian
+  MAMBA_CMD_MODE      0x101    1 byte   mode (0=idle,1=drive,2=estop)
+  MAMBA_CMD_ESTOP     0x102    1 byte   0x01=stop
+
+VESC STATUS (extended 29-bit, matching vesc_can.h):
+  arb_id = (VESC_PKT_STATUS << 8) | vesc_node_id  = (9 << 8) | node_id
+  Payload: int32 RPM (BE), int16 current×10 (BE), int16 duty×1000 (BE)
+"""
+
+import struct
+from typing import Tuple
+
+# ---------------------------------------------------------------------------
+# Orin → FC (Mamba) command IDs  (from orin_can.h)
+# ---------------------------------------------------------------------------
+
+ORIN_CMD_HEARTBEAT: int = 0x300
+ORIN_CMD_DRIVE: int     = 0x301
+ORIN_CMD_MODE: int      = 0x302
+ORIN_CMD_ESTOP: int     = 0x303
+
+# ---------------------------------------------------------------------------
+# FC (Mamba) → Orin telemetry IDs  (from orin_can.h)
+# ---------------------------------------------------------------------------
+
+FC_STATUS: int = 0x400
+FC_VESC: int   = 0x401
+FC_IMU: int    = 0x402
+FC_BARO: int   = 0x403
+
+# ---------------------------------------------------------------------------
+# Mamba → VESC internal command IDs  (from mamba_protocol.py)
+# ---------------------------------------------------------------------------
+
+MAMBA_CMD_VELOCITY: int = 0x100
+MAMBA_CMD_MODE: int     = 0x101
+MAMBA_CMD_ESTOP: int    = 0x102
+
+MAMBA_TELEM_IMU: int     = 0x200
+MAMBA_TELEM_BATTERY: int = 0x201
+VESC_TELEM_STATE: int    = 0x300
+
+# ---------------------------------------------------------------------------
+# Mode constants
+# ---------------------------------------------------------------------------
+
+MODE_IDLE: int  = 0
+MODE_DRIVE: int = 1
+MODE_ESTOP: int = 2
+
+# ---------------------------------------------------------------------------
+# VESC protocol constants  (from vesc_can.h)
+# ---------------------------------------------------------------------------
+
+VESC_PKT_STATUS: int    = 9   # STATUS packet type (upper byte of arb_id)
+VESC_PKT_SET_RPM: int   = 3   # SET_RPM packet type
+
+VESC_CAN_ID_LEFT: int  = 56
+VESC_CAN_ID_RIGHT: int = 68
+
+
+def VESC_STATUS_ID(vesc_node_id: int) -> int:
+    """
+    Return the 29-bit extended arbitration ID for a VESC STATUS frame.
+
+    Formula (from vesc_can.h):  arb_id = (VESC_PKT_STATUS << 8) | vesc_node_id
+                                        = (9 << 8) | vesc_node_id
+    """
+    return (VESC_PKT_STATUS << 8) | vesc_node_id
+
+
+def VESC_SET_RPM_ID(vesc_node_id: int) -> int:
+    """
+    Return the 29-bit extended arbitration ID for a VESC SET_RPM command.
+
+    Formula:  arb_id = (VESC_PKT_SET_RPM << 8) | vesc_node_id
+                     = (3 << 8) | vesc_node_id
+    """
+    return (VESC_PKT_SET_RPM << 8) | vesc_node_id
+
+
+# ---------------------------------------------------------------------------
+# Frame builders — Orin → FC
+# ---------------------------------------------------------------------------
+
+def build_heartbeat(seq: int = 0) -> bytes:
+    """Build a HEARTBEAT payload: uint32 sequence counter (big-endian, 4 bytes)."""
+    return struct.pack(">I", seq & 0xFFFFFFFF)
+
+
+def build_drive_cmd(speed: int, steer: int) -> bytes:
+    """
+    Build an ORIN_CMD_DRIVE payload.
+
+    Parameters
+    ----------
+    speed: int, −1000..+1000  (mapped directly to int16)
+    steer: int, −1000..+1000
+    """
+    return struct.pack(">hh", int(speed), int(steer))
+
+
+def build_mode_cmd(mode: int) -> bytes:
+    """Build an ORIN_CMD_MODE payload (1 byte)."""
+    return struct.pack(">B", mode & 0xFF)
+
+
+def build_estop_cmd(action: int = 1) -> bytes:
+    """Build an ORIN_CMD_ESTOP payload.  action=1 → ESTOP, 0 → CLEAR."""
+    return struct.pack(">B", action & 0xFF)
+
+
+# ---------------------------------------------------------------------------
+# Frame builders — Mamba velocity commands (mamba_protocol.py encoding)
+# ---------------------------------------------------------------------------
+
+def build_velocity_cmd(left_mps: float, right_mps: float) -> bytes:
+    """
+    Build a MAMBA_CMD_VELOCITY payload (8 bytes, 2 × float32 big-endian).
+
+    Matches encode_velocity_cmd() in mamba_protocol.py.
+    """
+    return struct.pack(">ff", float(left_mps), float(right_mps))
+
+
+# ---------------------------------------------------------------------------
+# Frame builders — FC → Orin telemetry
+# ---------------------------------------------------------------------------
+
+def build_fc_status(
+    pitch_x10: int = 0,
+    motor_cmd: int = 0,
+    vbat_mv: int = 24000,
+    balance_state: int = 1,
+    flags: int = 0,
+) -> bytes:
+    """
+    Build an FC_STATUS (0x400) payload.
+
+    Layout (orin_can_fc_status_t, 8 bytes, big-endian):
+      int16  pitch_x10
+      int16  motor_cmd
+      uint16 vbat_mv
+      uint8  balance_state
+      uint8  flags  [bit0=estop_active, bit1=armed]
+    """
+    return struct.pack(
+        ">hhHBB",
+        int(pitch_x10),
+        int(motor_cmd),
+        int(vbat_mv) & 0xFFFF,
+        int(balance_state) & 0xFF,
+        int(flags) & 0xFF,
+    )
+
+
+def build_fc_vesc(
+    left_rpm_x10: int = 0,
+    right_rpm_x10: int = 0,
+    left_current_x10: int = 0,
+    right_current_x10: int = 0,
+) -> bytes:
+    """
+    Build an FC_VESC (0x401) payload.
+
+    Layout (orin_can_fc_vesc_t, 8 bytes, big-endian):
+      int16 left_rpm_x10
+      int16 right_rpm_x10
+      int16 left_current_x10
+      int16 right_current_x10
+
+    RPM values are RPM / 10 (e.g. 3000 RPM → 300).
+    Current values are A × 10 (e.g. 5.5 A → 55).
+    """
+    return struct.pack(
+        ">hhhh",
+        int(left_rpm_x10),
+        int(right_rpm_x10),
+        int(left_current_x10),
+        int(right_current_x10),
+    )
+
+
+def build_vesc_status(
+    rpm: int = 0,
+    current_x10: int = 0,
+    duty_x1000: int = 0,
+) -> bytes:
+    """
+    Build a VESC STATUS (packet type 9) payload.
+
+    Layout (from vesc_can.h / VESC FW 6.x, big-endian):
+      int32 rpm
+      int16 current × 10
+      int16 duty × 1000
+    Total: 8 bytes.
+    """
+    return struct.pack(
+        ">ihh",
+        int(rpm),
+        int(current_x10),
+        int(duty_x1000),
+    )
+
+
+# ---------------------------------------------------------------------------
+# Frame parsers
+# ---------------------------------------------------------------------------
+
+def parse_fc_status(data: bytes):
+    """
+    Parse an FC_STATUS (0x400) payload.
+
+    Returns
+    -------
+    dict with keys: pitch_x10, motor_cmd, vbat_mv, balance_state, flags,
+                    estop_active (bool), armed (bool)
+    """
+    if len(data) < 8:
+        raise ValueError(f"FC_STATUS needs 8 bytes, got {len(data)}")
+    pitch_x10, motor_cmd, vbat_mv, balance_state, flags = struct.unpack(
+        ">hhHBB", data[:8]
+    )
+    return {
+        "pitch_x10": pitch_x10,
+        "motor_cmd": motor_cmd,
+        "vbat_mv": vbat_mv,
+        "balance_state": balance_state,
+        "flags": flags,
+        "estop_active": bool(flags & 0x01),
+        "armed": bool(flags & 0x02),
+    }
+
+
+def parse_fc_vesc(data: bytes):
+    """
+    Parse an FC_VESC (0x401) payload.
+
+    Returns
+    -------
+    dict with keys: left_rpm_x10, right_rpm_x10, left_current_x10,
+                    right_current_x10, left_rpm (float), right_rpm (float)
+    """
+    if len(data) < 8:
+        raise ValueError(f"FC_VESC needs 8 bytes, got {len(data)}")
+    left_rpm_x10, right_rpm_x10, left_cur_x10, right_cur_x10 = struct.unpack(
+        ">hhhh", data[:8]
+    )
+    return {
+        "left_rpm_x10": left_rpm_x10,
+        "right_rpm_x10": right_rpm_x10,
+        "left_current_x10": left_cur_x10,
+        "right_current_x10": right_cur_x10,
+        "left_rpm": left_rpm_x10 * 10.0,
+        "right_rpm": right_rpm_x10 * 10.0,
+    }
+
+
+def parse_vesc_status(data: bytes):
+    """
+    Parse a VESC STATUS (packet type 9) payload.
+
+    Returns
+    -------
+    dict with keys: rpm, current_x10, duty_x1000, current (float), duty (float)
+    """
+    if len(data) < 8:
+        raise ValueError(f"VESC STATUS needs 8 bytes, got {len(data)}")
+    rpm, current_x10, duty_x1000 = struct.unpack(">ihh", data[:8])
+    return {
+        "rpm": rpm,
+        "current_x10": current_x10,
+        "duty_x1000": duty_x1000,
+        "current": current_x10 / 10.0,
+        "duty": duty_x1000 / 1000.0,
+    }
+
+
+def parse_velocity_cmd(data: bytes) -> Tuple[float, float]:
+    """
+    Parse a MAMBA_CMD_VELOCITY payload (8 bytes, 2 × float32 big-endian).
+
+    Returns
+    -------
+    (left_mps, right_mps)
+    """
+    if len(data) < 8:
+        raise ValueError(f"MAMBA_CMD_VELOCITY needs 8 bytes, got {len(data)}")
+    return struct.unpack(">ff", data[:8])

jetson/ros2_ws/src/saltybot_can_e2e_test/setup.cfg

@@ -0,0 +1,5 @@
+[develop]
+script_dir=$base/lib/saltybot_can_e2e_test
+
+[install]
+install_scripts=$base/lib/saltybot_can_e2e_test

jetson/ros2_ws/src/saltybot_can_e2e_test/setup.py

@@ -0,0 +1,23 @@
+from setuptools import setup
+
+package_name = "saltybot_can_e2e_test"
+
+setup(
+    name=package_name,
+    version="0.1.0",
+    packages=[package_name],
+    data_files=[
+        ("share/ament_index/resource_index/packages", [f"resource/{package_name}"]),
+        (f"share/{package_name}", ["package.xml"]),
+    ],
+    install_requires=["setuptools"],
+    zip_safe=True,
+    maintainer="sl-jetson",
+    maintainer_email="sl-jetson@saltylab.local",
+    description="End-to-end CAN integration tests for Orin↔Mamba↔VESC full loop",
+    license="MIT",
+    tests_require=["pytest"],
+    entry_points={
+        "console_scripts": [],
+    },
+)

jetson/ros2_ws/src/saltybot_can_e2e_test/test/conftest.py

@@ -0,0 +1,93 @@
+#!/usr/bin/env python3
+"""
+conftest.py — pytest fixtures for the saltybot_can_e2e_test suite.
+
+No ROS2 node infrastructure is started; all tests run purely in Python.
+"""
+
+import sys
+import os
+
+# Ensure the package root is on sys.path so relative imports work when running
+# pytest directly from the saltybot_can_e2e_test/ directory.
+_pkg_root = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+if _pkg_root not in sys.path:
+    sys.path.insert(0, _pkg_root)
+
+# Also add the saltybot_can_bridge package so we can import mamba_protocol.
+_bridge_pkg = os.path.join(
+    os.path.dirname(_pkg_root), "saltybot_can_bridge"
+)
+if _bridge_pkg not in sys.path:
+    sys.path.insert(0, _bridge_pkg)
+
+import pytest
+
+from saltybot_can_e2e_test.can_mock import MockCANBus
+from saltybot_can_e2e_test.protocol_defs import (
+    VESC_CAN_ID_LEFT,
+    VESC_CAN_ID_RIGHT,
+)
+
+
+# ---------------------------------------------------------------------------
+# Core fixtures
+# ---------------------------------------------------------------------------
+
+
+@pytest.fixture(scope="function")
+def mock_can_bus():
+    """
+    Provide a fresh MockCANBus instance per test function.
+    The bus is automatically shut down after each test.
+    """
+    bus = MockCANBus(loopback=False)
+    yield bus
+    bus.shutdown()
+
+
+@pytest.fixture(scope="function")
+def loopback_can_bus():
+    """
+    MockCANBus in loopback mode — sent frames are also queued for recv.
+    Useful for testing round-trip behaviour without a second node.
+    """
+    bus = MockCANBus(loopback=True)
+    yield bus
+    bus.shutdown()
+
+
+@pytest.fixture(scope="function")
+def bridge_components():
+    """
+    Return the mamba_protocol encode/decode callables and a fresh mock bus.
+
+    Yields a dict with keys:
+      bus         — MockCANBus instance
+      encode_vel  — encode_velocity_cmd(left, right) → bytes
+      encode_mode — encode_mode_cmd(mode) → bytes
+      encode_estop — encode_estop_cmd(stop) → bytes
+      decode_vesc  — decode_vesc_state(data) → VescStateTelemetry
+    """
+    from saltybot_can_bridge.mamba_protocol import (
+        encode_velocity_cmd,
+        encode_mode_cmd,
+        encode_estop_cmd,
+        decode_vesc_state,
+        decode_battery_telem,
+        decode_imu_telem,
+    )
+
+    bus = MockCANBus(loopback=False)
+    yield {
+        "bus": bus,
+        "encode_vel": encode_velocity_cmd,
+        "encode_mode": encode_mode_cmd,
+        "encode_estop": encode_estop_cmd,
+        "decode_vesc": decode_vesc_state,
+        "decode_battery": decode_battery_telem,
+        "decode_imu": decode_imu_telem,
+        "left_vesc_id": VESC_CAN_ID_LEFT,
+        "right_vesc_id": VESC_CAN_ID_RIGHT,
+    }
+    bus.shutdown()

jetson/ros2_ws/src/saltybot_can_e2e_test/test/test_drive_command.py

@@ -0,0 +1,193 @@
+#!/usr/bin/env python3
+"""
+test_drive_command.py — Integration tests for the drive command path.
+
+Tests verify:
+  DRIVE cmd → Mamba receives velocity command frame → mock VESC status response
+  → FC_VESC broadcast contains correct RPMs.
+
+All tests run without real hardware or a running ROS2 system.
+Run with: python -m pytest test/test_drive_command.py -v
+"""
+
+import struct
+import pytest
+
+from saltybot_can_e2e_test.protocol_defs import (
+    MAMBA_CMD_VELOCITY,
+    MAMBA_CMD_MODE,
+    FC_VESC,
+    MODE_DRIVE,
+    MODE_IDLE,
+    VESC_CAN_ID_LEFT,
+    VESC_CAN_ID_RIGHT,
+    VESC_STATUS_ID,
+    build_velocity_cmd,
+    build_fc_vesc,
+    build_vesc_status,
+    parse_velocity_cmd,
+    parse_fc_vesc,
+)
+from saltybot_can_bridge.mamba_protocol import (
+    encode_velocity_cmd,
+    encode_mode_cmd,
+)
+
+
+# ---------------------------------------------------------------------------
+# Helper
+# ---------------------------------------------------------------------------
+
+def _send_drive(bus, left_mps: float, right_mps: float) -> None:
+    """Simulate the bridge encoding and sending a velocity command."""
+    from saltybot_can_e2e_test.can_mock import MockCANBus
+
+    payload = encode_velocity_cmd(left_mps, right_mps)
+    # Create a minimal message object compatible with our mock
+    class _Msg:
+        def __init__(self, arb_id, data):
+            self.arbitration_id = arb_id
+            self.data = bytearray(data)
+            self.is_extended_id = False
+
+    bus.send(_Msg(MAMBA_CMD_VELOCITY, payload))
+    bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(MODE_DRIVE)))
+
+
+# ---------------------------------------------------------------------------
+# Tests
+# ---------------------------------------------------------------------------
+
+class TestDriveForward:
+    def test_drive_forward_velocity_frame_sent(self, mock_can_bus):
+        """
+        Inject DRIVE cmd (1.0 m/s, 1.0 m/s) → verify Mamba receives
+        a MAMBA_CMD_VELOCITY frame with correct payload.
+        """
+        _send_drive(mock_can_bus, 1.0, 1.0)
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 1, "Expected exactly one velocity command frame"
+
+        left, right = parse_velocity_cmd(bytes(vel_frames[0].data))
+        assert abs(left - 1.0) < 1e-4, f"Left speed {left} != 1.0"
+        assert abs(right - 1.0) < 1e-4, f"Right speed {right} != 1.0"
+
+    def test_drive_forward_mode_drive_sent(self, mock_can_bus):
+        """After a drive command, a MODE=drive frame must accompany it."""
+        _send_drive(mock_can_bus, 1.0, 1.0)
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert len(mode_frames) >= 1, "Expected at least one MODE frame"
+        assert bytes(mode_frames[0].data) == bytes([MODE_DRIVE])
+
+    def test_drive_forward_fc_vesc_broadcast(self, mock_can_bus):
+        """
+        Simulate FC_VESC broadcast arriving after drive cmd; verify parse is correct.
+        (In the real loop Mamba computes RPM from m/s and broadcasts FC_VESC.)
+        This test checks the FC_VESC frame format and parser.
+        """
+        # Simulate: 1.0 m/s → ~300 RPM × 10 = 3000 (representative, not physics)
+        fc_payload = build_fc_vesc(
+            left_rpm_x10=300, right_rpm_x10=300,
+            left_current_x10=50, right_current_x10=50,
+        )
+        mock_can_bus.inject(FC_VESC, fc_payload)
+
+        frame = mock_can_bus.recv(timeout=0.1)
+        assert frame is not None, "FC_VESC frame not received"
+        parsed = parse_fc_vesc(bytes(frame.data))
+        assert parsed["left_rpm_x10"] == 300
+        assert parsed["right_rpm_x10"] == 300
+        assert abs(parsed["left_rpm"] - 3000.0) < 0.1
+
+
+class TestDriveTurn:
+    def test_drive_turn_differential_rpm(self, mock_can_bus):
+        """
+        DRIVE cmd (0.5, −0.5) → verify differential RPM in velocity command.
+        """
+        _send_drive(mock_can_bus, 0.5, -0.5)
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 1
+
+        left, right = parse_velocity_cmd(bytes(vel_frames[0].data))
+        assert abs(left - 0.5) < 1e-4,  f"Left speed {left} != 0.5"
+        assert abs(right - (-0.5)) < 1e-4, f"Right speed {right} != -0.5"
+        # Signs must be opposite for a zero-radius spin
+        assert left > 0 and right < 0
+
+    def test_drive_turn_fc_vesc_differential(self, mock_can_bus):
+        """Simulated FC_VESC for a turn has opposite-sign RPMs."""
+        fc_payload = build_fc_vesc(
+            left_rpm_x10=150, right_rpm_x10=-150,
+            left_current_x10=30, right_current_x10=30,
+        )
+        mock_can_bus.inject(FC_VESC, fc_payload)
+        frame = mock_can_bus.recv(timeout=0.1)
+        parsed = parse_fc_vesc(bytes(frame.data))
+        assert parsed["left_rpm_x10"] > 0
+        assert parsed["right_rpm_x10"] < 0
+
+
+class TestDriveZero:
+    def test_drive_zero_stops_motors(self, mock_can_bus):
+        """
+        After a non-zero drive cmd, sending zero velocity must result in
+        RPM=0 being commanded to both VESCs.
+        """
+        _send_drive(mock_can_bus, 1.0, 1.0)
+        mock_can_bus.reset()          # clear prior frames
+
+        _send_drive(mock_can_bus, 0.0, 0.0)
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 1
+        left, right = parse_velocity_cmd(bytes(vel_frames[0].data))
+        assert abs(left) < 1e-5,  "Left motor not stopped"
+        assert abs(right) < 1e-5, "Right motor not stopped"
+
+
+class TestDriveCmdTimeout:
+    def test_drive_cmd_timeout_sends_zero(self, mock_can_bus):
+        """
+        Simulate the watchdog behaviour: if no DRIVE cmd arrives for >500 ms,
+        zero velocity is sent.  We test the encoding directly (without timers).
+        """
+        # The watchdog in CanBridgeNode calls encode_velocity_cmd(0.0, 0.0) and
+        # sends it on MAMBA_CMD_VELOCITY.  Replicate that here.
+        zero_payload = encode_velocity_cmd(0.0, 0.0)
+
+        class _Msg:
+            def __init__(self, arb_id, data):
+                self.arbitration_id = arb_id
+                self.data = bytearray(data)
+                self.is_extended_id = False
+
+        mock_can_bus.send(_Msg(MAMBA_CMD_VELOCITY, zero_payload))
+        mock_can_bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(MODE_IDLE)))
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 1
+        left, right = parse_velocity_cmd(bytes(vel_frames[0].data))
+        assert abs(left) < 1e-5
+        assert abs(right) < 1e-5
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert len(mode_frames) == 1
+        assert bytes(mode_frames[0].data) == bytes([MODE_IDLE])
+
+
+@pytest.mark.parametrize("left_mps,right_mps", [
+    (0.5, 0.5),
+    (1.0, 0.0),
+    (0.0, -1.0),
+    (-0.5, -0.5),
+])
+def test_drive_cmd_payload_roundtrip(mock_can_bus, left_mps, right_mps):
+    """Parametrized: encode then decode must recover original velocities."""
+    payload = encode_velocity_cmd(left_mps, right_mps)
+    l, r = parse_velocity_cmd(payload)
+    assert abs(l - left_mps) < 1e-4
+    assert abs(r - right_mps) < 1e-4

jetson/ros2_ws/src/saltybot_can_e2e_test/test/test_estop.py

@@ -0,0 +1,264 @@
+#!/usr/bin/env python3
+"""
+test_estop.py — E-stop command integration tests.
+
+Covers:
+  - ESTOP command halts motors immediately
+  - ESTOP persists: DRIVE commands ignored while ESTOP is active
+  - ESTOP clear restores normal drive operation
+  - Firmware-side estop via FC_STATUS flags is detected correctly
+
+No ROS2 or real CAN hardware required.
+Run with: python -m pytest test/test_estop.py -v
+"""
+
+import struct
+import pytest
+
+from saltybot_can_e2e_test.can_mock import MockCANBus
+from saltybot_can_e2e_test.protocol_defs import (
+    MAMBA_CMD_VELOCITY,
+    MAMBA_CMD_MODE,
+    MAMBA_CMD_ESTOP,
+    ORIN_CMD_ESTOP,
+    FC_STATUS,
+    MODE_IDLE,
+    MODE_DRIVE,
+    MODE_ESTOP,
+    build_estop_cmd,
+    build_mode_cmd,
+    build_velocity_cmd,
+    build_fc_status,
+    parse_velocity_cmd,
+    parse_fc_status,
+)
+from saltybot_can_bridge.mamba_protocol import (
+    encode_velocity_cmd,
+    encode_mode_cmd,
+    encode_estop_cmd,
+)
+
+
+# ---------------------------------------------------------------------------
+# Helpers
+# ---------------------------------------------------------------------------
+
+class _Msg:
+    """Minimal CAN message stand-in."""
+    def __init__(self, arb_id: int, data: bytes, is_extended_id: bool = False):
+        self.arbitration_id = arb_id
+        self.data = bytearray(data)
+        self.is_extended_id = is_extended_id
+
+
+class EstopStateMachine:
+    """
+    Lightweight state machine that mirrors the bridge estop logic.
+
+    Tracks whether ESTOP is active and gates velocity commands accordingly.
+    Sends frames to the supplied MockCANBus.
+    """
+
+    def __init__(self, bus: MockCANBus):
+        self._bus = bus
+        self._estop_active = False
+        self._mode = MODE_IDLE
+
+    def assert_estop(self) -> None:
+        """Send ESTOP and transition to estop mode."""
+        self._estop_active = True
+        self._mode = MODE_ESTOP
+        self._bus.send(_Msg(MAMBA_CMD_VELOCITY, encode_velocity_cmd(0.0, 0.0)))
+        self._bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(MODE_ESTOP)))
+        self._bus.send(_Msg(MAMBA_CMD_ESTOP, encode_estop_cmd(True)))
+
+    def clear_estop(self) -> None:
+        """Clear ESTOP and return to IDLE mode."""
+        self._estop_active = False
+        self._mode = MODE_IDLE
+        self._bus.send(_Msg(MAMBA_CMD_ESTOP, encode_estop_cmd(False)))
+        self._bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(MODE_IDLE)))
+
+    def send_drive(self, left_mps: float, right_mps: float) -> None:
+        """Send velocity command only if ESTOP is not active."""
+        if self._estop_active:
+            # Bridge silently drops commands while estopped
+            return
+        self._mode = MODE_DRIVE
+        self._bus.send(_Msg(MAMBA_CMD_VELOCITY, encode_velocity_cmd(left_mps, right_mps)))
+        self._bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(MODE_DRIVE)))
+
+    @property
+    def estop_active(self) -> bool:
+        return self._estop_active
+
+
+# ---------------------------------------------------------------------------
+# Tests
+# ---------------------------------------------------------------------------
+
+class TestEstopHaltsMotors:
+    def test_estop_command_halts_motors(self, mock_can_bus):
+        """
+        After injecting ESTOP, zero velocity must be commanded immediately.
+        """
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) >= 1, "No velocity frame after ESTOP"
+        l, r = parse_velocity_cmd(bytes(vel_frames[-1].data))
+        assert abs(l) < 1e-5, f"Left motor {l} not zero after ESTOP"
+        assert abs(r) < 1e-5, f"Right motor {r} not zero after ESTOP"
+
+    def test_estop_mode_frame_sent(self, mock_can_bus):
+        """ESTOP mode byte must be broadcast on CAN."""
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert any(
+            bytes(f.data) == bytes([MODE_ESTOP]) for f in mode_frames
+        ), "MODE=ESTOP not found in sent frames"
+
+    def test_estop_flag_byte_is_0x01(self, mock_can_bus):
+        """MAMBA_CMD_ESTOP payload must be 0x01 when asserting e-stop."""
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+
+        estop_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_ESTOP)
+        assert len(estop_frames) >= 1
+        assert bytes(estop_frames[-1].data) == b"\x01", \
+            f"ESTOP payload {estop_frames[-1].data!r} != 0x01"
+
+
+class TestEstopPersists:
+    def test_estop_persists_after_drive_cmd(self, mock_can_bus):
+        """
+        After ESTOP, injecting a DRIVE command must NOT forward velocity to the bus.
+        """
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+        mock_can_bus.reset()   # start fresh after initial ESTOP frames
+
+        sm.send_drive(1.0, 1.0)   # should be suppressed
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 0, \
+            "Velocity command was forwarded while ESTOP is active"
+
+    def test_estop_mode_unchanged_after_drive_attempt(self, mock_can_bus):
+        """
+        After ESTOP, attempting DRIVE must not change the mode to DRIVE.
+        """
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+        mock_can_bus.reset()
+
+        sm.send_drive(0.5, 0.5)
+
+        # No mode frames should have been emitted (drive was suppressed)
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert all(
+            bytes(f.data) != bytes([MODE_DRIVE]) for f in mode_frames
+        ), "MODE=DRIVE was set despite active ESTOP"
+
+
+class TestEstopClear:
+    def test_estop_clear_restores_drive(self, mock_can_bus):
+        """After ESTOP_CLEAR, drive commands must be accepted again."""
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+        sm.clear_estop()
+        mock_can_bus.reset()
+
+        sm.send_drive(0.8, 0.8)
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 1, "Velocity command not sent after ESTOP clear"
+        l, r = parse_velocity_cmd(bytes(vel_frames[0].data))
+        assert abs(l - 0.8) < 1e-4
+        assert abs(r - 0.8) < 1e-4
+
+    def test_estop_clear_flag_byte_is_0x00(self, mock_can_bus):
+        """MAMBA_CMD_ESTOP payload must be 0x00 when clearing e-stop."""
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+        sm.clear_estop()
+
+        estop_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_ESTOP)
+        assert len(estop_frames) >= 2
+        # Last ESTOP frame should be the clear
+        assert bytes(estop_frames[-1].data) == b"\x00", \
+            f"ESTOP clear payload {estop_frames[-1].data!r} != 0x00"
+
+    def test_estop_clear_mode_returns_to_idle(self, mock_can_bus):
+        """After clearing ESTOP, the mode frame must be MODE_IDLE."""
+        sm = EstopStateMachine(mock_can_bus)
+        sm.assert_estop()
+        sm.clear_estop()
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        last_mode = bytes(mode_frames[-1].data)
+        assert last_mode == bytes([MODE_IDLE]), \
+            f"Mode after ESTOP clear is {last_mode!r}, expected MODE_IDLE"
+
+
+class TestFirmwareSideEstop:
+    def test_fc_status_estop_flag_detected(self, mock_can_bus):
+        """
+        Simulate firmware sending estop via FC_STATUS flags (bit0=estop_active).
+        Verify the Orin bridge side correctly parses the flag.
+        """
+        # Build FC_STATUS with estop_active bit set (flags=0x01)
+        payload = build_fc_status(
+            pitch_x10=0,
+            motor_cmd=0,
+            vbat_mv=24000,
+            balance_state=2,   # TILT_FAULT
+            flags=0x01,        # bit0 = estop_active
+        )
+        mock_can_bus.inject(FC_STATUS, payload)
+
+        frame = mock_can_bus.recv(timeout=0.1)
+        assert frame is not None, "FC_STATUS frame not received"
+        parsed = parse_fc_status(bytes(frame.data))
+        assert parsed["estop_active"] is True, \
+            "estop_active flag not set in FC_STATUS"
+        assert parsed["balance_state"] == 2
+
+    def test_fc_status_no_estop_flag(self, mock_can_bus):
+        """FC_STATUS with flags=0x00 must NOT set estop_active."""
+        payload = build_fc_status(flags=0x00)
+        mock_can_bus.inject(FC_STATUS, payload)
+        frame = mock_can_bus.recv(timeout=0.1)
+        parsed = parse_fc_status(bytes(frame.data))
+        assert parsed["estop_active"] is False
+
+    def test_fc_status_armed_flag_detected(self, mock_can_bus):
+        """FC_STATUS flags bit1=armed must parse correctly."""
+        payload = build_fc_status(flags=0x02)  # bit1 = armed
+        mock_can_bus.inject(FC_STATUS, payload)
+        frame = mock_can_bus.recv(timeout=0.1)
+        parsed = parse_fc_status(bytes(frame.data))
+        assert parsed["armed"] is True
+        assert parsed["estop_active"] is False
+
+    def test_fc_status_roundtrip(self, mock_can_bus):
+        """build_fc_status → inject → recv → parse_fc_status must be identity."""
+        payload = build_fc_status(
+            pitch_x10=150,
+            motor_cmd=-200,
+            vbat_mv=23800,
+            balance_state=1,
+            flags=0x03,
+        )
+        mock_can_bus.inject(FC_STATUS, payload)
+        frame = mock_can_bus.recv(timeout=0.1)
+        parsed = parse_fc_status(bytes(frame.data))
+        assert parsed["pitch_x10"] == 150
+        assert parsed["motor_cmd"] == -200
+        assert parsed["vbat_mv"] == 23800
+        assert parsed["balance_state"] == 1
+        assert parsed["estop_active"] is True
+        assert parsed["armed"] is True

jetson/ros2_ws/src/saltybot_can_e2e_test/test/test_fc_vesc_broadcast.py

@@ -0,0 +1,315 @@
+#!/usr/bin/env python3
+"""
+test_fc_vesc_broadcast.py — FC_VESC broadcast and VESC STATUS integration tests.
+
+Covers:
+  - VESC STATUS extended frame for left VESC (ID 56) triggers FC_VESC broadcast
+  - Both left (56) and right (68) VESC STATUS combined in FC_VESC
+  - FC_VESC broadcast rate (~10 Hz)
+  - current_x10 scaling matches protocol spec
+
+No ROS2 or real CAN hardware required.
+Run with: python -m pytest test/test_fc_vesc_broadcast.py -v
+"""
+
+import struct
+import time
+import threading
+import pytest
+
+from saltybot_can_e2e_test.can_mock import MockCANBus
+from saltybot_can_e2e_test.protocol_defs import (
+    FC_VESC,
+    VESC_CAN_ID_LEFT,
+    VESC_CAN_ID_RIGHT,
+    VESC_STATUS_ID,
+    VESC_SET_RPM_ID,
+    VESC_TELEM_STATE,
+    build_vesc_status,
+    build_fc_vesc,
+    parse_fc_vesc,
+    parse_vesc_status,
+)
+from saltybot_can_bridge.mamba_protocol import (
+    VESC_TELEM_STATE as BRIDGE_VESC_TELEM_STATE,
+    decode_vesc_state,
+)
+
+
+# ---------------------------------------------------------------------------
+# Helpers
+# ---------------------------------------------------------------------------
+
+class VescStatusAggregator:
+    """
+    Simulates the firmware logic that:
+      1. Receives VESC STATUS extended frames from left/right VESCs
+      2. Builds an FC_VESC broadcast payload
+      3. Injects the FC_VESC frame onto the mock bus
+
+    This represents the Mamba → Orin telemetry path.
+    """
+
+    def __init__(self, bus: MockCANBus):
+        self._bus = bus
+        self._left_rpm_x10 = 0
+        self._right_rpm_x10 = 0
+        self._left_current_x10 = 0
+        self._right_current_x10 = 0
+        self._left_seen = False
+        self._right_seen = False
+
+    def process_vesc_status(self, arb_id: int, data: bytes) -> None:
+        """
+        Process an incoming VESC STATUS frame (extended 29-bit ID).
+        Updates internal state; broadcasts FC_VESC when at least one side is known.
+        """
+        node_id = arb_id & 0xFF
+        parsed = parse_vesc_status(data)
+        rpm_x10 = parsed["rpm"] // 10   # convert full RPM to RPM/10
+
+        if node_id == VESC_CAN_ID_LEFT:
+            self._left_rpm_x10 = rpm_x10
+            self._left_current_x10 = parsed["current_x10"]
+            self._left_seen = True
+        elif node_id == VESC_CAN_ID_RIGHT:
+            self._right_rpm_x10 = rpm_x10
+            self._right_current_x10 = parsed["current_x10"]
+            self._right_seen = True
+
+        # Broadcast FC_VESC whenever we receive any update
+        self._broadcast_fc_vesc()
+
+    def _broadcast_fc_vesc(self) -> None:
+        payload = build_fc_vesc(
+            left_rpm_x10=self._left_rpm_x10,
+            right_rpm_x10=self._right_rpm_x10,
+            left_current_x10=self._left_current_x10,
+            right_current_x10=self._right_current_x10,
+        )
+        self._bus.inject(FC_VESC, payload)
+
+
+def _inject_vesc_status(bus: MockCANBus, vesc_id: int, rpm: int,
+                        current_x10: int = 50, duty_x1000: int = 250) -> None:
+    """Inject a VESC STATUS extended frame for the given node ID."""
+    arb_id = VESC_STATUS_ID(vesc_id)
+    payload = build_vesc_status(rpm=rpm, current_x10=current_x10, duty_x1000=duty_x1000)
+    bus.inject(arb_id, payload, is_extended_id=True)
+
+
+# ---------------------------------------------------------------------------
+# Tests
+# ---------------------------------------------------------------------------
+
+class TestVescStatusToFcVesc:
+    def test_left_vesc_status_triggers_broadcast(self, mock_can_bus):
+        """
+        Inject VESC STATUS for left VESC (ID 56) → verify FC_VESC contains
+        the correct left RPM (rpm / 10).
+        """
+        agg = VescStatusAggregator(mock_can_bus)
+
+        # Left VESC: 3000 RPM → rpm_x10 = 300
+        arb_id = VESC_STATUS_ID(VESC_CAN_ID_LEFT)
+        payload = build_vesc_status(rpm=3000, current_x10=55)
+        agg.process_vesc_status(arb_id, payload)
+
+        frame = mock_can_bus.recv(timeout=0.1)
+        assert frame is not None, "No FC_VESC broadcast after left VESC STATUS"
+        parsed = parse_fc_vesc(bytes(frame.data))
+        assert parsed["left_rpm_x10"] == 300, \
+            f"left_rpm_x10 {parsed['left_rpm_x10']} != 300"
+        assert abs(parsed["left_rpm"] - 3000.0) < 1.0
+
+    def test_right_vesc_status_triggers_broadcast(self, mock_can_bus):
+        """Inject VESC STATUS for right VESC (ID 68) → verify right RPM in FC_VESC."""
+        agg = VescStatusAggregator(mock_can_bus)
+
+        arb_id = VESC_STATUS_ID(VESC_CAN_ID_RIGHT)
+        payload = build_vesc_status(rpm=2000, current_x10=40)
+        agg.process_vesc_status(arb_id, payload)
+
+        frame = mock_can_bus.recv(timeout=0.1)
+        assert frame is not None
+        parsed = parse_fc_vesc(bytes(frame.data))
+        assert parsed["right_rpm_x10"] == 200
+
+    def test_left_vesc_id_matches_constant(self):
+        """VESC_STATUS_ID(56) must equal (9 << 8) | 56 = 0x938."""
+        assert VESC_STATUS_ID(VESC_CAN_ID_LEFT) == (9 << 8) | 56
+        assert VESC_STATUS_ID(VESC_CAN_ID_LEFT) == 0x938
+
+    def test_right_vesc_id_matches_constant(self):
+        """VESC_STATUS_ID(68) must equal (9 << 8) | 68 = 0x944."""
+        assert VESC_STATUS_ID(VESC_CAN_ID_RIGHT) == (9 << 8) | 68
+        assert VESC_STATUS_ID(VESC_CAN_ID_RIGHT) == 0x944
+
+
+class TestBothVescStatusCombined:
+    def test_both_vesc_status_combined_in_fc_vesc(self, mock_can_bus):
+        """
+        Inject both left (56) and right (68) VESC STATUS frames.
+        Final FC_VESC must contain both RPMs.
+        """
+        agg = VescStatusAggregator(mock_can_bus)
+
+        # Left: 3000 RPM
+        agg.process_vesc_status(
+            VESC_STATUS_ID(VESC_CAN_ID_LEFT),
+            build_vesc_status(rpm=3000, current_x10=50),
+        )
+        # Right: -1500 RPM (reverse)
+        agg.process_vesc_status(
+            VESC_STATUS_ID(VESC_CAN_ID_RIGHT),
+            build_vesc_status(rpm=-1500, current_x10=30),
+        )
+
+        # Drain two FC_VESC frames (one per update), check the latest
+        frames = []
+        while True:
+            f = mock_can_bus.recv(timeout=0.05)
+            if f is None:
+                break
+            frames.append(f)
+
+        assert len(frames) >= 2, "Expected at least 2 FC_VESC frames"
+        # Last frame must have both sides
+        last = parse_fc_vesc(bytes(frames[-1].data))
+        assert last["left_rpm_x10"] == 300, \
+            f"left_rpm_x10 {last['left_rpm_x10']} != 300"
+        assert last["right_rpm_x10"] == -150, \
+            f"right_rpm_x10 {last['right_rpm_x10']} != -150"
+
+    def test_both_vesc_currents_combined(self, mock_can_bus):
+        """Both current values must appear in FC_VESC after two STATUS frames."""
+        agg = VescStatusAggregator(mock_can_bus)
+        agg.process_vesc_status(
+            VESC_STATUS_ID(VESC_CAN_ID_LEFT),
+            build_vesc_status(rpm=1000, current_x10=55),
+        )
+        agg.process_vesc_status(
+            VESC_STATUS_ID(VESC_CAN_ID_RIGHT),
+            build_vesc_status(rpm=1000, current_x10=42),
+        )
+        frames = []
+        while True:
+            f = mock_can_bus.recv(timeout=0.05)
+            if f is None:
+                break
+            frames.append(f)
+        last = parse_fc_vesc(bytes(frames[-1].data))
+        assert last["left_current_x10"] == 55
+        assert last["right_current_x10"] == 42
+
+
+class TestVescBroadcastRate:
+    def test_fc_vesc_broadcast_at_10hz(self, mock_can_bus):
+        """
+        Simulate FC_VESC broadcasts at ~10 Hz and verify the rate.
+        We inject 12 frames over ~120 ms, then verify count and average interval.
+        """
+        _FC_VESC_HZ = 10
+        _interval = 1.0 / _FC_VESC_HZ
+
+        timestamps = []
+        stop_event = threading.Event()
+
+        def broadcaster():
+            while not stop_event.is_set():
+                t = time.monotonic()
+                mock_can_bus.inject(
+                    FC_VESC,
+                    build_fc_vesc(100, -100, 30, 30),
+                    timestamp=t,
+                )
+                timestamps.append(t)
+                time.sleep(_interval)
+
+        t = threading.Thread(target=broadcaster, daemon=True)
+        t.start()
+        time.sleep(0.15)   # collect ~1.5 broadcasts
+        stop_event.set()
+        t.join(timeout=0.2)
+
+        assert len(timestamps) >= 1, "No FC_VESC broadcasts in 150 ms window"
+
+        if len(timestamps) >= 2:
+            intervals = [timestamps[i+1] - timestamps[i] for i in range(len(timestamps)-1)]
+            avg = sum(intervals) / len(intervals)
+            # ±40 ms tolerance for OS scheduling
+            assert 0.06 <= avg <= 0.14, \
+                f"FC_VESC broadcast interval {avg*1000:.1f} ms not ~100 ms"
+
+    def test_fc_vesc_frame_is_8_bytes(self):
+        """FC_VESC payload must always be exactly 8 bytes."""
+        payload = build_fc_vesc(300, -150, 55, 42)
+        assert len(payload) == 8
+
+
+class TestVescCurrentScaling:
+    def test_current_x10_scaling(self, mock_can_bus):
+        """
+        Verify current_x10 scaling: 5.5 A → current_x10=55.
+        build_vesc_status stores current_x10 directly; parse_vesc_status
+        returns current = current_x10 / 10.
+        """
+        payload = build_vesc_status(rpm=1000, current_x10=55, duty_x1000=250)
+        parsed = parse_vesc_status(payload)
+        assert parsed["current_x10"] == 55
+        assert abs(parsed["current"] - 5.5) < 0.01
+
+    def test_current_negative_scaling(self, mock_can_bus):
+        """Negative current (regen) must scale correctly."""
+        payload = build_vesc_status(rpm=-500, current_x10=-30)
+        parsed = parse_vesc_status(payload)
+        assert parsed["current_x10"] == -30
+        assert abs(parsed["current"] - (-3.0)) < 0.01
+
+    def test_fc_vesc_current_x10_roundtrip(self, mock_can_bus):
+        """build_fc_vesc → inject → recv → parse must preserve current_x10."""
+        payload = build_fc_vesc(
+            left_rpm_x10=200,
+            right_rpm_x10=200,
+            left_current_x10=55,
+            right_current_x10=42,
+        )
+        mock_can_bus.inject(FC_VESC, payload)
+        frame = mock_can_bus.recv(timeout=0.1)
+        parsed = parse_fc_vesc(bytes(frame.data))
+        assert parsed["left_current_x10"] == 55
+        assert parsed["right_current_x10"] == 42
+
+    @pytest.mark.parametrize("vesc_id", [VESC_CAN_ID_LEFT, VESC_CAN_ID_RIGHT])
+    def test_vesc_status_id_both_nodes(self, vesc_id, mock_can_bus):
+        """
+        VESC_STATUS_ID(vesc_id) must produce the correct 29-bit extended arb_id
+        for both the left (56) and right (68) node IDs.
+        """
+        expected = (9 << 8) | vesc_id
+        assert VESC_STATUS_ID(vesc_id) == expected
+
+    @pytest.mark.parametrize("vesc_id,rpm,expected_rpm_x10", [
+        (VESC_CAN_ID_LEFT,  3000, 300),
+        (VESC_CAN_ID_LEFT, -1500, -150),
+        (VESC_CAN_ID_RIGHT,  2000,  200),
+        (VESC_CAN_ID_RIGHT,    0,    0),
+    ])
+    def test_rpm_x10_conversion_parametrized(
+        self, mock_can_bus, vesc_id, rpm, expected_rpm_x10
+    ):
+        """Parametrized: verify rpm → rpm_x10 conversion for both VESCs."""
+        agg = VescStatusAggregator(mock_can_bus)
+        agg.process_vesc_status(
+            VESC_STATUS_ID(vesc_id),
+            build_vesc_status(rpm=rpm),
+        )
+        frame = mock_can_bus.recv(timeout=0.05)
+        assert frame is not None
+        parsed = parse_fc_vesc(bytes(frame.data))
+        if vesc_id == VESC_CAN_ID_LEFT:
+            assert parsed["left_rpm_x10"] == expected_rpm_x10, \
+                f"left_rpm_x10={parsed['left_rpm_x10']} expected {expected_rpm_x10}"
+        else:
+            assert parsed["right_rpm_x10"] == expected_rpm_x10, \
+                f"right_rpm_x10={parsed['right_rpm_x10']} expected {expected_rpm_x10}"

jetson/ros2_ws/src/saltybot_can_e2e_test/test/test_heartbeat_timeout.py

@@ -0,0 +1,238 @@
+#!/usr/bin/env python3
+"""
+test_heartbeat_timeout.py — Tests for heartbeat loss and recovery.
+
+Covers:
+  - Heartbeat loss triggers e-stop escalation (timeout logic)
+  - Heartbeat recovery restores previous mode
+  - Heartbeat interval is sent at ~100 ms
+
+No ROS2 or real CAN hardware required.
+Run with: python -m pytest test/test_heartbeat_timeout.py -v
+"""
+
+import time
+import struct
+import threading
+import pytest
+
+from saltybot_can_e2e_test.can_mock import MockCANBus
+from saltybot_can_e2e_test.protocol_defs import (
+    ORIN_CMD_HEARTBEAT,
+    ORIN_CMD_ESTOP,
+    ORIN_CMD_MODE,
+    MAMBA_CMD_VELOCITY,
+    MAMBA_CMD_MODE,
+    MAMBA_CMD_ESTOP,
+    MODE_IDLE,
+    MODE_DRIVE,
+    MODE_ESTOP,
+    build_heartbeat,
+    build_estop_cmd,
+    build_mode_cmd,
+    build_velocity_cmd,
+    parse_velocity_cmd,
+)
+from saltybot_can_bridge.mamba_protocol import (
+    encode_velocity_cmd,
+    encode_mode_cmd,
+    encode_estop_cmd,
+)
+
+# Heartbeat timeout from orin_can.h: 500 ms
+ORIN_HB_TIMEOUT_MS = 500
+ORIN_HB_TIMEOUT_S  = ORIN_HB_TIMEOUT_MS / 1000.0
+
+# Expected heartbeat interval
+HB_INTERVAL_MS = 100
+HB_INTERVAL_S  = HB_INTERVAL_MS / 1000.0
+
+
+# ---------------------------------------------------------------------------
+# Helpers
+# ---------------------------------------------------------------------------
+
+class HeartbeatSimulator:
+    """
+    Simulate periodic heartbeat injection into a MockCANBus.
+
+    Call start() to begin sending heartbeats every interval_s.
+    Call stop() to cease — after ORIN_HB_TIMEOUT_S the firmware would declare
+    Orin offline.
+    """
+
+    def __init__(self, bus: MockCANBus, interval_s: float = HB_INTERVAL_S):
+        self._bus = bus
+        self._interval_s = interval_s
+        self._seq = 0
+        self._running = False
+        self._thread: threading.Thread | None = None
+
+    def start(self):
+        self._running = True
+        self._thread = threading.Thread(target=self._run, daemon=True)
+        self._thread.start()
+
+    def stop(self):
+        self._running = False
+
+    def _run(self):
+        while self._running:
+            self._bus.inject(
+                ORIN_CMD_HEARTBEAT,
+                build_heartbeat(self._seq),
+                is_extended_id=False,
+            )
+            self._seq += 1
+            time.sleep(self._interval_s)
+
+
+def _simulate_estop_on_timeout(bus: MockCANBus) -> None:
+    """
+    Simulate the firmware-side logic: when heartbeat timeout expires,
+    the FC sends an e-stop command by setting estop mode on the Mamba bus.
+    We model this as the bridge sending zero velocity + ESTOP mode.
+    """
+
+    class _Msg:
+        def __init__(self, arb_id, data):
+            self.arbitration_id = arb_id
+            self.data = bytearray(data)
+            self.is_extended_id = False
+
+    bus.send(_Msg(MAMBA_CMD_VELOCITY, encode_velocity_cmd(0.0, 0.0)))
+    bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(MODE_ESTOP)))
+    bus.send(_Msg(MAMBA_CMD_ESTOP, encode_estop_cmd(True)))
+
+
+# ---------------------------------------------------------------------------
+# Tests
+# ---------------------------------------------------------------------------
+
+class TestHeartbeatLoss:
+    def test_heartbeat_loss_triggers_estop(self, mock_can_bus):
+        """
+        After heartbeat ceases, the bridge must command zero velocity and
+        set ESTOP mode.  We simulate this directly using _simulate_estop_on_timeout.
+        """
+        # First confirm the bus is clean
+        assert len(mock_can_bus.get_sent_frames()) == 0
+
+        # Simulate bridge detecting timeout and escalating
+        _simulate_estop_on_timeout(mock_can_bus)
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) >= 1, "Zero velocity not sent after timeout"
+        l, r = parse_velocity_cmd(bytes(vel_frames[-1].data))
+        assert abs(l) < 1e-5, "Left not zero on timeout"
+        assert abs(r) < 1e-5, "Right not zero on timeout"
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert any(
+            bytes(f.data) == bytes([MODE_ESTOP]) for f in mode_frames
+        ), "ESTOP mode not asserted on heartbeat timeout"
+
+        estop_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_ESTOP)
+        assert len(estop_frames) >= 1, "ESTOP command not sent"
+        assert bytes(estop_frames[0].data) == b"\x01"
+
+    def test_heartbeat_loss_zero_velocity(self, mock_can_bus):
+        """Zero velocity frame must appear among sent frames after timeout."""
+        _simulate_estop_on_timeout(mock_can_bus)
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) >= 1
+        for f in vel_frames:
+            l, r = parse_velocity_cmd(bytes(f.data))
+            assert abs(l) < 1e-5
+            assert abs(r) < 1e-5
+
+
+class TestHeartbeatRecovery:
+    def test_heartbeat_recovery_restores_drive_mode(self, mock_can_bus):
+        """
+        After heartbeat loss + recovery, drive commands must be accepted again.
+        We simulate: ESTOP → clear estop → send drive → verify velocity frame.
+        """
+
+        class _Msg:
+            def __init__(self, arb_id, data):
+                self.arbitration_id = arb_id
+                self.data = bytearray(data)
+                self.is_extended_id = False
+
+        # Phase 1: timeout → estop
+        _simulate_estop_on_timeout(mock_can_bus)
+        mock_can_bus.reset()
+
+        # Phase 2: recovery — clear estop, restore drive mode
+        mock_can_bus.send(_Msg(MAMBA_CMD_ESTOP, encode_estop_cmd(False)))
+        mock_can_bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(MODE_DRIVE)))
+        mock_can_bus.send(_Msg(MAMBA_CMD_VELOCITY, encode_velocity_cmd(0.5, 0.5)))
+
+        estop_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_ESTOP)
+        assert any(bytes(f.data) == b"\x00" for f in estop_frames), \
+            "ESTOP clear not sent on recovery"
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert any(
+            bytes(f.data) == bytes([MODE_DRIVE]) for f in mode_frames
+        ), "DRIVE mode not restored after recovery"
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) >= 1
+        l, r = parse_velocity_cmd(bytes(vel_frames[-1].data))
+        assert abs(l - 0.5) < 1e-4
+
+    def test_heartbeat_sequence_increments(self, mock_can_bus):
+        """Heartbeat payloads must have incrementing sequence numbers."""
+        payloads = []
+        for seq in range(5):
+            mock_can_bus.inject(
+                ORIN_CMD_HEARTBEAT,
+                build_heartbeat(seq),
+                is_extended_id=False,
+            )
+
+        for i in range(5):
+            frame = mock_can_bus.recv(timeout=0.05)
+            assert frame is not None
+            (seq_val,) = struct.unpack(">I", bytes(frame.data))
+            assert seq_val == i, f"Expected seq {i}, got {seq_val}"
+
+
+class TestHeartbeatInterval:
+    def test_heartbeat_interval_approx_100ms(self, mock_can_bus):
+        """
+        Start HeartbeatSimulator, collect timestamps over ~300 ms, and verify
+        the average interval is within 20% of 100 ms.
+        """
+        sim = HeartbeatSimulator(mock_can_bus, interval_s=0.1)
+        sim.start()
+        time.sleep(0.35)
+        sim.stop()
+
+        timestamps = []
+        while True:
+            frame = mock_can_bus.recv(timeout=0.01)
+            if frame is None:
+                break
+            if frame.arbitration_id == ORIN_CMD_HEARTBEAT:
+                timestamps.append(frame.timestamp)
+
+        assert len(timestamps) >= 2, "Not enough heartbeat frames captured"
+
+        intervals = [
+            timestamps[i + 1] - timestamps[i]
+            for i in range(len(timestamps) - 1)
+        ]
+        avg_interval = sum(intervals) / len(intervals)
+        # Allow ±30 ms tolerance (OS scheduling jitter in CI)
+        assert 0.07 <= avg_interval <= 0.13, \
+            f"Average heartbeat interval {avg_interval*1000:.1f} ms not ~100 ms"
+
+    def test_heartbeat_payload_is_4_bytes(self, mock_can_bus):
+        """Heartbeat payload must be exactly 4 bytes (uint32 sequence)."""
+        for seq in (0, 1, 0xFFFFFFFF):
+            payload = build_heartbeat(seq)
+            assert len(payload) == 4, \
+                f"Heartbeat payload length {len(payload)} != 4"

jetson/ros2_ws/src/saltybot_can_e2e_test/test/test_mode_switching.py

@@ -0,0 +1,236 @@
+#!/usr/bin/env python3
+"""
+test_mode_switching.py — Mode transition integration tests.
+
+Covers:
+  - idle → drive: drive commands become accepted
+  - drive → estop: immediate motor stop
+  - MODE frame byte values match protocol constants
+  - Unknown mode byte is ignored (no state change)
+
+No ROS2 or real CAN hardware required.
+Run with: python -m pytest test/test_mode_switching.py -v
+"""
+
+import struct
+import pytest
+
+from saltybot_can_e2e_test.can_mock import MockCANBus
+from saltybot_can_e2e_test.protocol_defs import (
+    MAMBA_CMD_VELOCITY,
+    MAMBA_CMD_MODE,
+    MAMBA_CMD_ESTOP,
+    MODE_IDLE,
+    MODE_DRIVE,
+    MODE_ESTOP,
+    build_mode_cmd,
+    build_velocity_cmd,
+    parse_velocity_cmd,
+)
+from saltybot_can_bridge.mamba_protocol import (
+    encode_velocity_cmd,
+    encode_mode_cmd,
+    encode_estop_cmd,
+)
+
+
+# ---------------------------------------------------------------------------
+# Helpers
+# ---------------------------------------------------------------------------
+
+class _Msg:
+    def __init__(self, arb_id: int, data: bytes, is_extended_id: bool = False):
+        self.arbitration_id = arb_id
+        self.data = bytearray(data)
+        self.is_extended_id = is_extended_id
+
+
+class ModeStateMachine:
+    """
+    Minimal state machine tracking mode transitions and gating commands.
+    """
+
+    def __init__(self, bus: MockCANBus):
+        self._bus = bus
+        self._mode = MODE_IDLE
+
+    def set_mode(self, mode: int) -> bool:
+        """
+        Transition to mode.  Returns True if accepted, False if invalid.
+        Invalid mode values (not 0, 1, 2) are ignored.
+        """
+        if mode not in (MODE_IDLE, MODE_DRIVE, MODE_ESTOP):
+            return False  # silently ignore
+
+        prev_mode = self._mode
+        self._mode = mode
+        self._bus.send(_Msg(MAMBA_CMD_MODE, encode_mode_cmd(mode)))
+
+        # Side-effects of entering ESTOP from DRIVE
+        if mode == MODE_ESTOP and prev_mode == MODE_DRIVE:
+            self._bus.send(_Msg(MAMBA_CMD_VELOCITY, encode_velocity_cmd(0.0, 0.0)))
+            self._bus.send(_Msg(MAMBA_CMD_ESTOP, encode_estop_cmd(True)))
+
+        return True
+
+    def send_drive(self, left_mps: float, right_mps: float) -> bool:
+        """
+        Send a velocity command.  Returns True if forwarded, False if blocked.
+        """
+        if self._mode != MODE_DRIVE:
+            return False
+        self._bus.send(_Msg(MAMBA_CMD_VELOCITY, encode_velocity_cmd(left_mps, right_mps)))
+        return True
+
+    @property
+    def mode(self) -> int:
+        return self._mode
+
+
+# ---------------------------------------------------------------------------
+# Tests
+# ---------------------------------------------------------------------------
+
+class TestIdleToDrive:
+    def test_idle_to_drive_mode_frame(self, mock_can_bus):
+        """Transitioning to DRIVE must emit a MODE=drive frame."""
+        sm = ModeStateMachine(mock_can_bus)
+        sm.set_mode(MODE_DRIVE)
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert len(mode_frames) == 1
+        assert bytes(mode_frames[0].data) == bytes([MODE_DRIVE])
+
+    def test_idle_blocks_drive_commands(self, mock_can_bus):
+        """In IDLE mode, drive commands must be suppressed."""
+        sm = ModeStateMachine(mock_can_bus)
+        # Attempt drive without entering DRIVE mode
+        forwarded = sm.send_drive(1.0, 1.0)
+        assert forwarded is False, "Drive cmd should be blocked in IDLE mode"
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 0
+
+    def test_drive_mode_allows_commands(self, mock_can_bus):
+        """After entering DRIVE mode, velocity commands must be forwarded."""
+        sm = ModeStateMachine(mock_can_bus)
+        sm.set_mode(MODE_DRIVE)
+        mock_can_bus.reset()
+
+        forwarded = sm.send_drive(0.5, 0.5)
+        assert forwarded is True
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 1
+        l, r = parse_velocity_cmd(bytes(vel_frames[0].data))
+        assert abs(l - 0.5) < 1e-4
+        assert abs(r - 0.5) < 1e-4
+
+
+class TestDriveToEstop:
+    def test_drive_to_estop_stops_motors(self, mock_can_bus):
+        """Transitioning DRIVE → ESTOP must immediately send zero velocity."""
+        sm = ModeStateMachine(mock_can_bus)
+        sm.set_mode(MODE_DRIVE)
+        sm.send_drive(1.0, 1.0)
+        mock_can_bus.reset()
+
+        sm.set_mode(MODE_ESTOP)
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) >= 1, "No velocity frame on DRIVE→ESTOP transition"
+        l, r = parse_velocity_cmd(bytes(vel_frames[-1].data))
+        assert abs(l) < 1e-5, f"Left motor {l} not zero after ESTOP"
+        assert abs(r) < 1e-5, f"Right motor {r} not zero after ESTOP"
+
+    def test_drive_to_estop_mode_frame(self, mock_can_bus):
+        """DRIVE → ESTOP must broadcast MODE=estop."""
+        sm = ModeStateMachine(mock_can_bus)
+        sm.set_mode(MODE_DRIVE)
+        sm.set_mode(MODE_ESTOP)
+
+        mode_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_MODE)
+        assert any(bytes(f.data) == bytes([MODE_ESTOP]) for f in mode_frames)
+
+    def test_estop_blocks_subsequent_drive(self, mock_can_bus):
+        """After DRIVE → ESTOP, drive commands must be blocked."""
+        sm = ModeStateMachine(mock_can_bus)
+        sm.set_mode(MODE_DRIVE)
+        sm.set_mode(MODE_ESTOP)
+        mock_can_bus.reset()
+
+        forwarded = sm.send_drive(1.0, 1.0)
+        assert forwarded is False
+
+        vel_frames = mock_can_bus.get_sent_frames_by_id(MAMBA_CMD_VELOCITY)
+        assert len(vel_frames) == 0
+
+
+class TestModeCommandEncoding:
+    def test_mode_idle_byte(self, mock_can_bus):
+        """MODE_IDLE must encode as 0x00."""
+        assert encode_mode_cmd(MODE_IDLE) == b"\x00"
+
+    def test_mode_drive_byte(self, mock_can_bus):
+        """MODE_DRIVE must encode as 0x01."""
+        assert encode_mode_cmd(MODE_DRIVE) == b"\x01"
+
+    def test_mode_estop_byte(self, mock_can_bus):
+        """MODE_ESTOP must encode as 0x02."""
+        assert encode_mode_cmd(MODE_ESTOP) == b"\x02"
+
+    def test_mode_frame_length(self, mock_can_bus):
+        """Mode command payload must be exactly 1 byte."""
+        for mode in (MODE_IDLE, MODE_DRIVE, MODE_ESTOP):
+            payload = encode_mode_cmd(mode)
+            assert len(payload) == 1, f"Mode {mode} payload length {len(payload)} != 1"
+
+    def test_protocol_defs_build_mode_cmd_matches(self):
+        """build_mode_cmd in protocol_defs must produce identical bytes."""
+        for mode in (MODE_IDLE, MODE_DRIVE, MODE_ESTOP):
+            assert build_mode_cmd(mode) == encode_mode_cmd(mode), \
+                f"protocol_defs.build_mode_cmd({mode}) != mamba_protocol.encode_mode_cmd({mode})"
+
+
+class TestInvalidMode:
+    def test_invalid_mode_byte_ignored(self, mock_can_bus):
+        """Unknown mode byte (e.g. 0xFF) must be rejected — no state change."""
+        sm = ModeStateMachine(mock_can_bus)
+        sm.set_mode(MODE_DRIVE)
+        initial_mode = sm.mode
+        mock_can_bus.reset()
+
+        accepted = sm.set_mode(0xFF)
+        assert accepted is False, "Invalid mode 0xFF should be rejected"
+        assert sm.mode == initial_mode, "Mode changed despite invalid value"
+        assert len(mock_can_bus.get_sent_frames()) == 0, \
+            "Frames sent for invalid mode command"
+
+    def test_invalid_mode_99_ignored(self, mock_can_bus):
+        """Mode 99 must be rejected."""
+        sm = ModeStateMachine(mock_can_bus)
+        accepted = sm.set_mode(99)
+        assert accepted is False
+
+    def test_invalid_mode_negative_ignored(self, mock_can_bus):
+        """Negative mode values must be rejected."""
+        sm = ModeStateMachine(mock_can_bus)
+        accepted = sm.set_mode(-1)
+        assert accepted is False
+
+    def test_mamba_protocol_invalid_mode_raises(self):
+        """mamba_protocol.encode_mode_cmd must raise on invalid mode."""
+        with pytest.raises(ValueError):
+            encode_mode_cmd(99)
+        with pytest.raises(ValueError):
+            encode_mode_cmd(-1)
+
+
+@pytest.mark.parametrize("mode,expected_byte", [
+    (MODE_IDLE,  b"\x00"),
+    (MODE_DRIVE, b"\x01"),
+    (MODE_ESTOP, b"\x02"),
+])
+def test_mode_encoding_parametrized(mode, expected_byte):
+    """Parametrized check that all mode constants encode to the right byte."""
+    assert encode_mode_cmd(mode) == expected_byte

jetson/ros2_ws/src/saltybot_nav2_slam/config/map_saver_params.yaml

@@ -0,0 +1,22 @@
+# map_saver_params.yaml — nav2_map_server map_saver_server config (Issue #696)
+#
+# map_saver_server is a lifecycle node from nav2_map_server that exposes the
+# /map_saver/save_map action (nav2_msgs/action/SaveMap).  It is included in
+# the SLAM bringup so operators can trigger a map save without restarting.
+#
+# Save a map (while SLAM is running):
+#   ros2 run nav2_map_server map_saver_cli \
+#       -f /mnt/nvme/saltybot/maps/saltybot_map --map_subscribe_transient_local
+#
+# Or via action:
+#   ros2 action send_goal /map_saver/save_map nav2_msgs/action/SaveMap \
+#       '{map_topic: "map", map_url: "/mnt/nvme/saltybot/maps/saltybot_map",
+#         image_format: "pgm", map_mode: "trinary",
+#         free_thresh: 0.25, occupied_thresh: 0.65}'
+
+map_saver:
+  ros__parameters:
+    save_map_timeout:          5.0    # s — time to wait for /map topic on save
+    free_thresh_default:       0.25   # p ≤ 0.25 → free cell
+    occupied_thresh_default:   0.65   # p ≥ 0.65 → occupied cell
+    map_subscribe_transient_local: true  # use transient-local QoS (required for /map)

jetson/ros2_ws/src/saltybot_nav2_slam/launch/map_persistence.launch.py

@@ -0,0 +1,143 @@
+"""
+map_persistence.launch.py — Map save/load lifecycle nodes (Issue #696).
+
+Launches:
+  1. map_saver_server  — nav2_map_server lifecycle node; exposes
+                         /map_saver/save_map action (nav2_msgs/action/SaveMap)
+  2. saltybot_map_saver — helper node: /saltybot/save_map Trigger service,
+                          startup check, optional auto-save on shutdown
+  3. lifecycle_manager_map_saver — manages map_saver_server transitions
+
+Arguments
+─────────
+  map_dir      path to map storage directory
+               (default: /mnt/nvme/saltybot/maps)
+  map_name     base filename for saved map, no extension
+               (default: saltybot_map)
+  use_sim_time (default: false)
+  autostart    lifecycle manager autostart (default: true)
+
+Save a map (CLI shortcut while SLAM is running):
+  ros2 service call /saltybot/save_map std_srvs/srv/Trigger {}
+
+Or directly via map_saver_cli:
+  ros2 run nav2_map_server map_saver_cli \\
+      -f /mnt/nvme/saltybot/maps/saltybot_map --map_subscribe_transient_local
+
+Load on next startup:
+  ros2 launch saltybot_nav2_slam nav2_amcl_bringup.launch.py
+      # auto-detects /mnt/nvme/saltybot/maps/saltybot_map.yaml if present
+"""
+
+import os
+
+from ament_index_python.packages import get_package_share_directory
+
+from launch import LaunchDescription
+from launch.actions import DeclareLaunchArgument, LogInfo
+from launch.substitutions import LaunchConfiguration
+from launch_ros.actions import Node
+
+
+def generate_launch_description() -> LaunchDescription:
+    nav2_slam_dir = get_package_share_directory("saltybot_nav2_slam")
+    map_saver_params = os.path.join(nav2_slam_dir, "config", "map_saver_params.yaml")
+
+    # ── Arguments ─────────────────────────────────────────────────────────────
+
+    map_dir_arg = DeclareLaunchArgument(
+        "map_dir",
+        default_value="/mnt/nvme/saltybot/maps",
+        description="Directory for saving/loading map files (.yaml + .pgm)",
+    )
+
+    map_name_arg = DeclareLaunchArgument(
+        "map_name",
+        default_value="saltybot_map",
+        description="Base filename for saved map (no extension)",
+    )
+
+    use_sim_time_arg = DeclareLaunchArgument(
+        "use_sim_time",
+        default_value="false",
+        description="Use simulated clock",
+    )
+
+    autostart_arg = DeclareLaunchArgument(
+        "autostart",
+        default_value="true",
+        description="Automatically configure/activate lifecycle nodes",
+    )
+
+    # ── Substitutions ─────────────────────────────────────────────────────────
+
+    map_dir      = LaunchConfiguration("map_dir")
+    map_name     = LaunchConfiguration("map_name")
+    use_sim_time = LaunchConfiguration("use_sim_time")
+    autostart    = LaunchConfiguration("autostart")
+
+    # ── map_saver_server (nav2_map_server lifecycle node) ─────────────────────
+    # Exposes /map_saver/save_map action server when active.
+
+    map_saver_server = Node(
+        package="nav2_map_server",
+        executable="map_saver_server",
+        name="map_saver",
+        output="screen",
+        respawn=True,
+        respawn_delay=2.0,
+        parameters=[
+            map_saver_params,
+            {"use_sim_time": use_sim_time},
+        ],
+    )
+
+    # ── saltybot_map_saver helper node ────────────────────────────────────────
+    # /saltybot/save_map Trigger service + startup reporting + auto-save.
+
+    map_saver_helper = Node(
+        package="saltybot_nav2_slam",
+        executable="map_saver_node",
+        name="saltybot_map_saver",
+        output="screen",
+        parameters=[
+            {
+                "map_dir":              map_dir,
+                "map_name":             map_name,
+                "auto_save_on_shutdown": True,
+                "use_sim_time":         use_sim_time,
+            }
+        ],
+    )
+
+    # ── Lifecycle manager for map_saver_server ────────────────────────────────
+
+    lifecycle_manager = Node(
+        package="nav2_lifecycle_manager",
+        executable="lifecycle_manager",
+        name="lifecycle_manager_map_saver",
+        output="screen",
+        parameters=[
+            {
+                "use_sim_time": use_sim_time,
+                "autostart":    autostart,
+                "node_names":   ["map_saver"],
+            }
+        ],
+    )
+
+    return LaunchDescription([
+        # Arguments
+        map_dir_arg,
+        map_name_arg,
+        use_sim_time_arg,
+        autostart_arg,
+
+        # Banner
+        LogInfo(msg="[map_persistence] Starting map_saver_server + helper (Issue #696)"),
+
+        # Nodes
+        map_saver_server,
+        map_saver_helper,
+        lifecycle_manager,
+    ])

jetson/ros2_ws/src/saltybot_nav2_slam/launch/nav2_amcl_bringup.launch.py

@@ -1,107 +1,42 @@
-"""
+"""nav2_amcl_bringup.launch.py (Issue #655, #696) — AMCL + auto map detection.
-nav2_amcl_bringup.launch.py — Nav2 with AMCL localization (Issue #655).
 
-Full autonomous navigation stack for SaltyBot using a pre-built static map
+Map selection (Issue #696): if /mnt/nvme/saltybot/maps/saltybot_map.yaml exists
-and AMCL particle-filter localization.
+at launch time, it is used automatically. Otherwise falls back to placeholder.
 
-Odometry: /odom from vesc_can_odometry (VESC CAN IDs 61/79, Issue #646)
+Usage:
-LiDAR:    /scan from RPLIDAR A1M8 (via saltybot_bringup sensors.launch.py)
-Map:      static OccupancyGrid loaded by map_server (defaults to placeholder)
-
-Startup sequence
-────────────────
-  1. Sensors         — RealSense D435i + RPLIDAR A1M8 drivers + static TF
-  2. VESC odometry   — /odom (differential drive from dual CAN motors)
-  3. Localization    — map_server + AMCL (nav2_bringup localization_launch.py)
-  4. Navigation      — controller + planner + behaviors + BT navigator
-                       (nav2_bringup navigation_launch.py)
-
-Arguments
-─────────
-  map            path to map YAML (default: maps/saltybot_map.yaml placeholder)
-  use_sim_time   (default: false)
-  autostart      lifecycle manager autostart (default: true)
-  params_file    Nav2 params override (default: config/amcl_nav2_params.yaml)
-  include_sensors  launch sensors.launch.py (default: true — set false if
-                   sensors are already running)
-
-Usage
-─────
-  # Minimal — sensors included, placeholder map:
   ros2 launch saltybot_nav2_slam nav2_amcl_bringup.launch.py
-
+  ros2 launch saltybot_nav2_slam nav2_amcl_bringup.launch.py map_dir:=/mnt/nvme/saltybot/maps
-  # With a real saved map:
+  ros2 launch saltybot_nav2_slam nav2_amcl_bringup.launch.py map:=/path/to/room.yaml
-  ros2 launch saltybot_nav2_slam nav2_amcl_bringup.launch.py \
+  ros2 launch saltybot_nav2_slam nav2_amcl_bringup.launch.py include_sensors:=false
-      map:=/mnt/nvme/saltybot/maps/my_map.yaml
-
-  # Without sensor bringup (sensors already running):
-  ros2 launch saltybot_nav2_slam nav2_amcl_bringup.launch.py \
-      include_sensors:=false
-
-Integration with saltybot_bringup
-──────────────────────────────────
-  The saltybot_bringup orchestrator (saltybot_bringup.launch.py) calls
-  nav2.launch.py at t=22 s in GROUP C.  To use AMCL instead of RTAB-Map:
-    ros2 launch saltybot_bringup nav2.launch.py nav_mode:=amcl
 """
 
 import os
-
 from ament_index_python.packages import get_package_share_directory
-
 from launch import LaunchDescription
-from launch.actions import (
+from launch.actions import DeclareLaunchArgument, GroupAction, IncludeLaunchDescription, LogInfo
-    DeclareLaunchArgument,
-    GroupAction,
-    IncludeLaunchDescription,
-    LogInfo,
-)
 from launch.conditions import IfCondition
 from launch.launch_description_sources import PythonLaunchDescriptionSource
 from launch.substitutions import LaunchConfiguration
 
+# Map auto-detection (Issue #696): evaluated at ros2 launch time on the Jetson.
+_NVME_MAP_DIR = "/mnt/nvme/saltybot/maps"
+_NVME_MAP_YAML = os.path.join(_NVME_MAP_DIR, "saltybot_map.yaml")
+
+
+def _default_map() -> str:
+    if os.path.isfile(_NVME_MAP_YAML):
+        return _NVME_MAP_YAML
+    nav2_slam_dir = get_package_share_directory("saltybot_nav2_slam")
+    return os.path.join(nav2_slam_dir, "maps", "saltybot_map.yaml")
+
 
 def generate_launch_description() -> LaunchDescription:
     nav2_slam_dir    = get_package_share_directory("saltybot_nav2_slam")
     bringup_dir      = get_package_share_directory("saltybot_bringup")
     nav2_bringup_dir = get_package_share_directory("nav2_bringup")
-
+    default_map      = _default_map()
-    default_map    = os.path.join(nav2_slam_dir, "maps", "saltybot_map.yaml")
     default_params   = os.path.join(nav2_slam_dir, "config", "amcl_nav2_params.yaml")
-
+    map_source = "saved NVMe map" if default_map == _NVME_MAP_YAML else "placeholder map"
-    # ── Launch arguments ──────────────────────────────────────────────────────
-
-    map_arg = DeclareLaunchArgument(
-        "map",
-        default_value=default_map,
-        description="Path to map YAML file (Nav2 map_server format)",
-    )
-
-    use_sim_time_arg = DeclareLaunchArgument(
-        "use_sim_time",
-        default_value="false",
-        description="Use simulated clock from /clock topic",
-    )
-
-    autostart_arg = DeclareLaunchArgument(
-        "autostart",
-        default_value="true",
-        description="Automatically start lifecycle nodes after launch",
-    )
-
-    params_file_arg = DeclareLaunchArgument(
-        "params_file",
-        default_value=default_params,
-        description="Path to Nav2 parameter YAML file",
-    )
-
-    include_sensors_arg = DeclareLaunchArgument(
-        "include_sensors",
-        default_value="true",
-        description="Launch sensors.launch.py (set false if sensors already running)",
-    )
-
-    # ── Substitutions ─────────────────────────────────────────────────────────
 
     map_file        = LaunchConfiguration("map")
     use_sim_time    = LaunchConfiguration("use_sim_time")
@@ -109,80 +44,53 @@ def generate_launch_description() -> LaunchDescription:
     params_file     = LaunchConfiguration("params_file")
     include_sensors = LaunchConfiguration("include_sensors")
 
-    # ── Sensor bringup (conditional) ─────────────────────────────────────────
+    return LaunchDescription([
-    # RealSense D435i + RPLIDAR A1M8 drivers + base_link→laser/camera_link TF
+        DeclareLaunchArgument("map_dir", default_value=_NVME_MAP_DIR,
+                              description="Directory containing saved map files (Issue #696)"),
+        DeclareLaunchArgument("map", default_value=default_map,
+                              description="Path to map YAML. Auto-detected: " + default_map),
+        DeclareLaunchArgument("use_sim_time", default_value="false"),
+        DeclareLaunchArgument("autostart", default_value="true"),
+        DeclareLaunchArgument("params_file", default_value=default_params),
+        DeclareLaunchArgument("include_sensors", default_value="true",
+                              description="Launch sensors.launch.py"),
 
-    sensors_launch = GroupAction(
+        LogInfo(msg="[nav2_amcl] Nav2 AMCL bringup starting (Issues #655, #696)"),
+        LogInfo(msg="[nav2_amcl] Map: " + map_source + " -> " + default_map),
+
+        GroupAction(
             condition=IfCondition(include_sensors),
             actions=[
                 LogInfo(msg="[nav2_amcl] Starting sensors (RealSense + RPLIDAR)"),
                 IncludeLaunchDescription(
-                PythonLaunchDescriptionSource(
+                    PythonLaunchDescriptionSource(os.path.join(bringup_dir, "launch", "sensors.launch.py")),
-                    os.path.join(bringup_dir, "launch", "sensors.launch.py")
-                ),
                 ),
             ],
-    )
-
-    # ── VESC CAN odometry ────────────────────────────────────────────────────
-    # Differential drive from CAN IDs 61 (left) + 79 (right) → /odom + TF
-
-    odom_launch = IncludeLaunchDescription(
-        PythonLaunchDescriptionSource(
-            os.path.join(nav2_slam_dir, "launch", "odometry_bridge.launch.py")
         ),
+
+        IncludeLaunchDescription(
+            PythonLaunchDescriptionSource(os.path.join(nav2_slam_dir, "launch", "odometry_bridge.launch.py")),
             launch_arguments={"use_sim_time": use_sim_time}.items(),
-    )
-
-    # ── Localization: map_server + AMCL ──────────────────────────────────────
-    # Publishes: /map, TF map→odom (AMCL), /amcl_pose, /particlecloud
-
-    localization_launch = IncludeLaunchDescription(
-        PythonLaunchDescriptionSource(
-            os.path.join(nav2_bringup_dir, "launch", "localization_launch.py")
         ),
+
+        LogInfo(msg="[nav2_amcl] Starting AMCL localization"),
+        IncludeLaunchDescription(
+            PythonLaunchDescriptionSource(os.path.join(nav2_bringup_dir, "launch", "localization_launch.py")),
             launch_arguments={
-            "map":           map_file,
+                "map": map_file, "use_sim_time": use_sim_time,
-            "use_sim_time":  use_sim_time,
+                "autostart": autostart, "params_file": params_file,
-            "autostart":     autostart,
-            "params_file":   params_file,
                 "use_lifecycle_mgr": "true",
             }.items(),
-    )
-
-    # ── Navigation: controller + planner + behaviors + BT navigator ──────────
-    # Subscribes: /odom, /scan, /map, /cmd_vel_nav (→ velocity_smoother → /cmd_vel)
-    # Provides: action servers for NavigateToPose + NavigateThroughPoses
-
-    navigation_launch = IncludeLaunchDescription(
-        PythonLaunchDescriptionSource(
-            os.path.join(nav2_bringup_dir, "launch", "navigation_launch.py")
         ),
+
+        LogInfo(msg="[nav2_amcl] Starting Nav2 navigation stack"),
+        IncludeLaunchDescription(
+            PythonLaunchDescriptionSource(os.path.join(nav2_bringup_dir, "launch", "navigation_launch.py")),
             launch_arguments={
-            "use_sim_time":                use_sim_time,
+                "use_sim_time": use_sim_time, "autostart": autostart,
-            "autostart":                   autostart,
                 "params_file": params_file,
                 "map_subscribe_transient_local": "true",
                 "use_lifecycle_mgr": "true",
             }.items(),
-    )
+        ),
-
-    return LaunchDescription([
-        # Arguments
-        map_arg,
-        use_sim_time_arg,
-        autostart_arg,
-        params_file_arg,
-        include_sensors_arg,
-
-        # Banner
-        LogInfo(msg="[nav2_amcl] Nav2 AMCL bringup starting (Issue #655)"),
-
-        # Startup sequence
-        sensors_launch,                             # step 1 — sensors
-        odom_launch,                                # step 2 — /odom from VESC
-        LogInfo(msg="[nav2_amcl] Starting AMCL localization"),
-        localization_launch,                        # step 3 — map_server + AMCL
-        LogInfo(msg="[nav2_amcl] Starting Nav2 navigation stack"),
-        navigation_launch,                          # step 4 — full nav stack
     ])

jetson/ros2_ws/src/saltybot_nav2_slam/launch/nav2_slam_bringup.launch.py

@@ -1,66 +1,65 @@
-"""Nav2 SLAM Bringup for SaltyBot (Issue #422)"""
+"""nav2_slam_bringup.launch.py (Issue #422, #696) — SLAM + map persistence."""
 
 import os
+from ament_index_python.packages import get_package_share_directory
 from launch import LaunchDescription
-from launch.actions import IncludeLaunchDescription, DeclareLaunchArgument
+from launch.actions import DeclareLaunchArgument, IncludeLaunchDescription
 from launch.launch_description_sources import PythonLaunchDescriptionSource
 from launch.substitutions import LaunchConfiguration
-from ament_index_python.packages import get_package_share_directory
 
 
 def generate_launch_description():
-    nav2_slam_dir = get_package_share_directory('saltybot_nav2_slam')
+    nav2_slam_dir = get_package_share_directory("saltybot_nav2_slam")
-    bringup_dir = get_package_share_directory('saltybot_bringup')
+    bringup_dir = get_package_share_directory("saltybot_bringup")
+    nav2_params = os.path.join(nav2_slam_dir, "config", "nav2_params.yaml")
+    slam_params = os.path.join(nav2_slam_dir, "config", "slam_toolbox_params.yaml")
 
-    nav2_params = os.path.join(nav2_slam_dir, 'config', 'nav2_params.yaml')
+    use_sim_time = LaunchConfiguration("use_sim_time")
-    slam_params = os.path.join(nav2_slam_dir, 'config', 'slam_toolbox_params.yaml')
+    map_dir = LaunchConfiguration("map_dir")
+    map_name = LaunchConfiguration("map_name")
 
     return LaunchDescription([
-        DeclareLaunchArgument('use_sim_time', default_value='false'),
+        DeclareLaunchArgument("use_sim_time", default_value="false"),
-
+        DeclareLaunchArgument(
+            "map_dir",
+            default_value="/mnt/nvme/saltybot/maps",
+            description="Directory for saving/loading map files (Issue #696)",
+        ),
+        DeclareLaunchArgument(
+            "map_name",
+            default_value="saltybot_map",
+            description="Base filename for saved map (no extension)",
+        ),
+        IncludeLaunchDescription(
+            PythonLaunchDescriptionSource(os.path.join(bringup_dir, "launch", "sensors.launch.py")),
+            launch_arguments={"use_sim_time": use_sim_time}.items(),
+        ),
+        IncludeLaunchDescription(
+            PythonLaunchDescriptionSource(os.path.join(nav2_slam_dir, "launch", "odometry_bridge.launch.py")),
+            launch_arguments={"use_sim_time": use_sim_time}.items(),
+        ),
+        IncludeLaunchDescription(
+            PythonLaunchDescriptionSource(os.path.join(nav2_slam_dir, "launch", "nav2_slam_integrated.launch.py")),
+            launch_arguments={"slam_params_file": slam_params, "use_sim_time": use_sim_time}.items(),
+        ),
+        IncludeLaunchDescription(
+            PythonLaunchDescriptionSource(os.path.join(nav2_slam_dir, "launch", "depth_to_costmap.launch.py")),
+            launch_arguments={"use_sim_time": use_sim_time}.items(),
+        ),
         IncludeLaunchDescription(
             PythonLaunchDescriptionSource(
-                os.path.join(bringup_dir, 'launch', 'sensors.launch.py')
+                os.path.join(get_package_share_directory("nav2_bringup"), "launch", "navigation_launch.py")
-            ),
-            launch_arguments={'use_sim_time': LaunchConfiguration('use_sim_time')}.items(),
-        ),
-
-        IncludeLaunchDescription(
-            PythonLaunchDescriptionSource(
-                os.path.join(nav2_slam_dir, 'launch', 'odometry_bridge.launch.py')
-            ),
-            launch_arguments={'use_sim_time': LaunchConfiguration('use_sim_time')}.items(),
-        ),
-
-        IncludeLaunchDescription(
-            PythonLaunchDescriptionSource(
-                os.path.join(nav2_slam_dir, 'launch', 'nav2_slam_integrated.launch.py')
             ),
             launch_arguments={
-                'slam_params_file': slam_params,
+                "use_sim_time": use_sim_time,
-                'use_sim_time': LaunchConfiguration('use_sim_time'),
+                "params_file": nav2_params,
+                "autostart": "true",
+                "map_subscribe_transient_local": "true",
             }.items(),
         ),
-
+        # Map persistence (Issue #696): map_saver_server + /saltybot/save_map service
         IncludeLaunchDescription(
-            PythonLaunchDescriptionSource(
+            PythonLaunchDescriptionSource(os.path.join(nav2_slam_dir, "launch", "map_persistence.launch.py")),
-                os.path.join(nav2_slam_dir, 'launch', 'depth_to_costmap.launch.py')
+            launch_arguments={"map_dir": map_dir, "map_name": map_name, "use_sim_time": use_sim_time}.items(),
-            ),
-            launch_arguments={'use_sim_time': LaunchConfiguration('use_sim_time')}.items(),
-        ),
-
-        IncludeLaunchDescription(
-            PythonLaunchDescriptionSource(
-                os.path.join(
-                    get_package_share_directory('nav2_bringup'),
-                    'launch', 'navigation_launch.py'
-                )
-            ),
-            launch_arguments={
-                'use_sim_time': LaunchConfiguration('use_sim_time'),
-                'params_file': nav2_params,
-                'autostart': 'true',
-                'map_subscribe_transient_local': 'true',
-            }.items(),
         ),
     ])

jetson/ros2_ws/src/saltybot_nav2_slam/saltybot_nav2_slam/map_saver_node.py

@@ -0,0 +1,145 @@
+#!/usr/bin/env python3
+"""
+map_saver_node.py — Map persistence helper for SLAM → AMCL hand-off (Issue #696).
+
+Responsibilities:
+  1. On startup: report whether a saved map exists at map_dir/map_name.yaml
+     (the path that nav2_amcl_bringup.launch.py will load on next boot).
+  2. Provide /saltybot/save_map (std_srvs/Trigger) — triggers map_saver_cli
+     to save the current /map topic to map_dir/map_name.{yaml,pgm}.
+  3. On shutdown: if auto_save_on_shutdown is true, save the final map.
+
+Parameters:
+  map_dir              (str)  default /mnt/nvme/saltybot/maps
+  map_name             (str)  default saltybot_map
+  auto_save_on_shutdown (bool) default true
+
+The saved map is loaded automatically by nav2_amcl_bringup.launch.py on the
+next startup when the file is present at map_dir/map_name.yaml.
+"""
+
+import os
+import subprocess
+
+import rclpy
+from rclpy.node import Node
+from std_srvs.srv import Trigger
+
+
+class MapSaverNode(Node):
+    """Helper node for SLAM map persistence and AMCL pre-load."""
+
+    def __init__(self) -> None:
+        super().__init__("saltybot_map_saver")
+
+        self.declare_parameter("map_dir",              "/mnt/nvme/saltybot/maps")
+        self.declare_parameter("map_name",             "saltybot_map")
+        self.declare_parameter("auto_save_on_shutdown", True)
+
+        self._map_dir   = self.get_parameter("map_dir").value
+        self._map_name  = self.get_parameter("map_name").value
+        self._auto_save = self.get_parameter("auto_save_on_shutdown").value
+
+        self._map_prefix = os.path.join(self._map_dir, self._map_name)
+        self._map_yaml   = self._map_prefix + ".yaml"
+
+        # ── Ensure map directory exists ────────────────────────────────────────
+        os.makedirs(self._map_dir, exist_ok=True)
+
+        # ── Report saved map status ────────────────────────────────────────────
+        if os.path.isfile(self._map_yaml):
+            self.get_logger().info(
+                f"[map_saver] Saved map found: {self._map_yaml} — "
+                "AMCL will load this map on next startup."
+            )
+        else:
+            self.get_logger().warn(
+                f"[map_saver] No saved map at {self._map_yaml} — "
+                "AMCL will use the placeholder map. "
+                "Run SLAM, then call /saltybot/save_map to persist."
+            )
+
+        # ── Service: /saltybot/save_map ────────────────────────────────────────
+        self._save_srv = self.create_service(
+            Trigger,
+            "/saltybot/save_map",
+            self._on_save_map,
+        )
+
+        self.get_logger().info(
+            f"[map_saver] Ready. map_dir={self._map_dir} map_name={self._map_name} "
+            f"auto_save_on_shutdown={self._auto_save}"
+        )
+
+    # ── Service callback ───────────────────────────────────────────────────────
+
+    def _on_save_map(
+        self, _request: Trigger.Request, response: Trigger.Response
+    ) -> Trigger.Response:
+        """Save current /map to map_dir/map_name.{yaml,pgm} via map_saver_cli."""
+        success, message = self._save_map()
+        response.success = success
+        response.message = message
+        return response
+
+    # ── Map save helper ────────────────────────────────────────────────────────
+
+    def _save_map(self) -> tuple[bool, str]:
+        """
+        Call nav2_map_server map_saver_cli to write the current /map.
+
+        Returns (success, message).
+        """
+        cmd = [
+            "ros2", "run", "nav2_map_server", "map_saver_cli",
+            "-f", self._map_prefix,
+            "--map_subscribe_transient_local",
+        ]
+        self.get_logger().info(f"[map_saver] Saving map to {self._map_prefix}.*")
+        try:
+            result = subprocess.run(
+                cmd,
+                timeout=10,
+                capture_output=True,
+                text=True,
+            )
+            if result.returncode == 0:
+                msg = f"Map saved to {self._map_yaml}"
+                self.get_logger().info(f"[map_saver] {msg}")
+                return True, msg
+            else:
+                msg = f"map_saver_cli failed (rc={result.returncode}): {result.stderr.strip()}"
+                self.get_logger().error(f"[map_saver] {msg}")
+                return False, msg
+        except subprocess.TimeoutExpired:
+            msg = "map_saver_cli timed out after 10 s (is /map published?)"
+            self.get_logger().error(f"[map_saver] {msg}")
+            return False, msg
+        except Exception as exc:  # noqa: BLE001
+            msg = f"map_saver_cli exception: {exc}"
+            self.get_logger().error(f"[map_saver] {msg}")
+            return False, msg
+
+    # ── Lifecycle ──────────────────────────────────────────────────────────────
+
+    def destroy_node(self) -> None:
+        if self._auto_save:
+            self.get_logger().info("[map_saver] Shutdown — auto-saving map...")
+            self._save_map()
+        super().destroy_node()
+
+
+def main(args=None) -> None:
+    rclpy.init(args=args)
+    node = MapSaverNode()
+    try:
+        rclpy.spin(node)
+    except KeyboardInterrupt:
+        pass
+    finally:
+        node.destroy_node()
+        rclpy.shutdown()
+
+
+if __name__ == "__main__":
+    main()

jetson/ros2_ws/src/saltybot_nav2_slam/setup.py

@@ -15,6 +15,7 @@ setup(
             "launch/depth_to_costmap.launch.py",
             "launch/odometry_bridge.launch.py",
             "launch/nav2_amcl_bringup.launch.py",
+            "launch/map_persistence.launch.py",
         ]),
         (f"share/{package_name}/config", [
             "config/nav2_params.yaml",
@@ -25,6 +26,7 @@ setup(
             "config/dwb_local_planner_params.yaml",
             "config/vesc_odometry_params.yaml",
             "config/amcl_nav2_params.yaml",
+            "config/map_saver_params.yaml",
         ]),
         (f"share/{package_name}/maps", [
             "maps/saltybot_map.yaml",
@@ -42,6 +44,7 @@ setup(
         "console_scripts": [
             "vesc_odometry_bridge = saltybot_nav2_slam.vesc_odometry_bridge:main",
             "vesc_can_odometry = saltybot_nav2_slam.vesc_odometry_bridge:main",
+            "map_saver_node = saltybot_nav2_slam.map_saver_node:main",
         ],
     },
 )

jetson/ros2_ws/src/saltybot_nav2_slam/test/test_nav2_amcl.py

@@ -334,5 +334,125 @@ def test_launch_file_has_map_argument():
     assert '"map"' in src or "'map'" in src
 
 
+
+# ── map_saver_params.yaml + map_persistence files (Issue #696) ───────────────
+
+import os as _os
+_PKG_ROOT2 = _os.path.join(_os.path.dirname(__file__), "..")
+_MAP_SAVER_CFG  = _os.path.join(_PKG_ROOT2, "config", "map_saver_params.yaml")
+_SLAM_LAUNCH    = _os.path.join(_PKG_ROOT2, "launch", "nav2_slam_bringup.launch.py")
+_PERSIST_LAUNCH = _os.path.join(_PKG_ROOT2, "launch", "map_persistence.launch.py")
+_SAVER_NODE     = _os.path.join(_PKG_ROOT2, "saltybot_nav2_slam", "map_saver_node.py")
+
+
+def _load_map_saver_params():
+    import yaml
+    with open(_MAP_SAVER_CFG) as f:
+        return yaml.safe_load(f)
+
+
+def test_map_saver_params_file_exists():
+    assert _os.path.isfile(_MAP_SAVER_CFG)
+
+
+def test_map_saver_params_required_keys():
+    p = _load_map_saver_params()["map_saver"]["ros__parameters"]
+    for key in ("save_map_timeout", "free_thresh_default",
+                "occupied_thresh_default", "map_subscribe_transient_local"):
+        assert key in p, f"map_saver_params missing: {key}"
+
+
+def test_map_saver_thresholds_valid():
+    p = _load_map_saver_params()["map_saver"]["ros__parameters"]
+    assert 0.0 < p["free_thresh_default"] < p["occupied_thresh_default"] < 1.0
+
+
+def test_map_saver_timeout_positive():
+    p = _load_map_saver_params()["map_saver"]["ros__parameters"]
+    assert p["save_map_timeout"] > 0.0
+
+
+def test_map_persistence_launch_exists():
+    assert _os.path.isfile(_PERSIST_LAUNCH)
+
+
+def test_map_persistence_launch_syntax():
+    import py_compile
+    py_compile.compile(_PERSIST_LAUNCH, doraise=True)
+
+
+def test_map_persistence_launch_has_map_saver_server():
+    with open(_PERSIST_LAUNCH) as f:
+        src = f.read()
+    assert "map_saver_server" in src
+
+
+def test_map_persistence_launch_has_lifecycle_manager():
+    with open(_PERSIST_LAUNCH) as f:
+        src = f.read()
+    assert "lifecycle_manager" in src
+
+
+def test_map_persistence_launch_has_map_dir_arg():
+    with open(_PERSIST_LAUNCH) as f:
+        src = f.read()
+    assert "map_dir" in src
+
+
+def test_map_saver_node_exists():
+    assert _os.path.isfile(_SAVER_NODE)
+
+
+def test_map_saver_node_syntax():
+    import py_compile
+    py_compile.compile(_SAVER_NODE, doraise=True)
+
+
+def test_map_saver_node_has_save_service():
+    with open(_SAVER_NODE) as f:
+        src = f.read()
+    assert "/saltybot/save_map" in src
+
+
+def test_map_saver_node_calls_map_saver_cli():
+    with open(_SAVER_NODE) as f:
+        src = f.read()
+    assert "map_saver_cli" in src
+
+
+def test_map_saver_node_has_auto_save_shutdown():
+    with open(_SAVER_NODE) as f:
+        src = f.read()
+    assert "auto_save_on_shutdown" in src
+
+
+def test_slam_bringup_includes_map_persistence():
+    with open(_SLAM_LAUNCH) as f:
+        src = f.read()
+    assert "map_persistence.launch.py" in src
+
+
+def test_slam_bringup_has_map_dir_arg():
+    with open(_SLAM_LAUNCH) as f:
+        src = f.read()
+    assert "map_dir" in src
+
+
+def test_amcl_launch_has_map_dir_arg():
+    import os as __os
+    _LAUNCH2 = __os.path.join(__os.path.dirname(__file__), "..", "launch", "nav2_amcl_bringup.launch.py")
+    with open(_LAUNCH2) as f:
+        src = f.read()
+    assert "map_dir" in src
+
+
+def test_amcl_launch_has_auto_detect_logic():
+    import os as __os
+    _LAUNCH2 = __os.path.join(__os.path.dirname(__file__), "..", "launch", "nav2_amcl_bringup.launch.py")
+    with open(_LAUNCH2) as f:
+        src = f.read()
+    assert "/mnt/nvme/saltybot/maps" in src
+    assert "isfile" in src or "os.path" in src
+
 if __name__ == "__main__":
     pytest.main([__file__, "-v"])

ui/can_monitor_panel.js

@@ -293,11 +293,51 @@ function drawCompass(yaw) {
 
 // ── ROS connection ────────────────────────────────────────────────────────────
 
-function connect(url) {
+// ── Auto-reconnect state ──────────────────────────────────────────────────────
+
+const RECONNECT_BASE_MS = 2000;
+const RECONNECT_MAX_MS  = 30000;
+const RECONNECT_FACTOR  = 1.5;
+
+let reconnectDelay  = RECONNECT_BASE_MS;
+let reconnectTimer  = null;
+let reconnectTick   = null;
+let reconnectTarget = null;
+
+function cancelReconnect() {
+  if (reconnectTimer) { clearTimeout(reconnectTimer);  reconnectTimer = null; }
+  if (reconnectTick)  { clearInterval(reconnectTick);  reconnectTick  = null; }
+}
+
+function scheduleReconnect(url) {
+  cancelReconnect();
+  let secs = Math.round(reconnectDelay / 1000);
+  $('conn-label').textContent = `Retry in ${secs}s…`;
+
+  reconnectTick = setInterval(() => {
+    secs = Math.max(0, secs - 1);
+    if (secs > 0) $('conn-label').textContent = `Retry in ${secs}s…`;
+  }, 1000);
+
+  reconnectTimer = setTimeout(() => {
+    reconnectTimer = null;
+    connect(url, true);
+  }, reconnectDelay);
+
+  reconnectDelay = Math.min(reconnectDelay * RECONNECT_FACTOR, RECONNECT_MAX_MS);
+}
+
+function connect(url, isAutoRetry) {
+  cancelReconnect();
+  reconnectTarget = url;
+  if (!isAutoRetry) reconnectDelay = RECONNECT_BASE_MS;
+
   if (ros) { try { ros.close(); } catch(_) {} }
   ros = new ROSLIB.Ros({ url });
 
   ros.on('connection', () => {
+    reconnectDelay = RECONNECT_BASE_MS;
+    cancelReconnect();
     $('conn-dot').className = 'connected';
     $('conn-label').style.color = '#22c55e';
     $('conn-label').textContent = 'Connected';
@@ -315,7 +355,7 @@ function connect(url) {
   ros.on('close', () => {
     $('conn-dot').className = '';
     $('conn-label').style.color = '#6b7280';
-    $('conn-label').textContent = 'Disconnected';
+    scheduleReconnect(reconnectTarget || $('ws-input').value.trim());
   });
 }
 
@@ -405,8 +445,8 @@ function setupTopics() {
 
 // ── UI wiring ─────────────────────────────────────────────────────────────────
 
-$('btn-connect').addEventListener('click', () => connect($('ws-input').value.trim()));
+$('btn-connect').addEventListener('click', () => connect($('ws-input').value.trim(), false));
-$('ws-input').addEventListener('keydown', e => { if (e.key === 'Enter') connect($('ws-input').value.trim()); });
+$('ws-input').addEventListener('keydown', e => { if (e.key === 'Enter') connect($('ws-input').value.trim(), false); });
 
 // ── Auto-connect on load ──────────────────────────────────────────────────────