sl-webui
767f377120
Create saltybot_tests package with comprehensive automated testing: Test Coverage: - Node startup verification (all critical nodes within 30s) - Topic publishing verification - TF tree completeness (all transforms present) - Sensor health checks (RPLIDAR, RealSense, IMU) - Perception pipeline (person detection availability) - Navigation stack (odometry, transforms) - System stability (30-second no-crash test) - Graceful shutdown verification Features: - launch_testing framework for automated startup tests - NodeChecker: wait for nodes in ROS graph - TFChecker: verify TF tree completeness - TopicMonitor: track message rates and counts - Follow mode tests (minimal hardware deps) - Subsystem-specific tests for sensor health - Comprehensive README with troubleshooting Usage: pytest src/saltybot_tests/test/test_launch.py -v -s or colcon test --packages-select saltybot_tests Performance Targets: - Node startup: <30s (follow mode) - RPLIDAR: 10 Hz scan rate - RealSense: 30 Hz RGB + depth - Person detection: 5 Hz - System stability: 30s no-crash validation Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
Jetson Nano — AI/SLAM Platform Setup
Self-balancing robot: Jetson Nano dev environment for ROS2 Humble + SLAM stack.
Stack
| Component | Version / Part |
|---|---|
| Platform | Jetson Nano 4GB |
| JetPack | 4.6 (L4T R32.6.1, CUDA 10.2) |
| ROS2 | Humble Hawksbill |
| DDS | CycloneDDS |
| SLAM | slam_toolbox |
| Nav | Nav2 |
| Depth camera | Intel RealSense D435i |
| LiDAR | RPLIDAR A1M8 |
| MCU bridge | STM32F722 (USB CDC @ 921600) |
Quick Start
# 1. Host setup (once, on fresh JetPack 4.6)
sudo bash scripts/setup-jetson.sh
# 2. Build Docker image
bash scripts/build-and-run.sh build
# 3. Start full stack
bash scripts/build-and-run.sh up
# 4. Open ROS2 shell
bash scripts/build-and-run.sh shell
Docs
docs/pinout.md— GPIO/I2C/UART pinout for all peripheralsdocs/power-budget.md— 10W power envelope analysis
Files
jetson/
├── Dockerfile # L4T base + ROS2 Humble + SLAM packages
├── docker-compose.yml # Multi-service stack (ROS2, RPLIDAR, D435i, STM32)
├── README.md # This file
├── docs/
│ ├── pinout.md # GPIO/I2C/UART pinout reference
│ └── power-budget.md # Power budget analysis (10W envelope)
└── scripts/
├── entrypoint.sh # Docker container entrypoint
├── setup-jetson.sh # Host setup (udev, Docker, nvpmodel)
└── build-and-run.sh # Build/run helper
Power Budget (Summary)
| Scenario | Total |
|---|---|
| Idle | 2.9W |
| Nominal (SLAM active) | ~10.2W |
| Peak | 15.4W |
Target: 10W (MAXN nvpmodel). Use RPLIDAR standby + 640p D435i for compliance.
See docs/power-budget.md for full analysis.