Sebastien Vayrette 302dfea6f4 fix: Add g_twai_bus_off diagnostic, auto-arm for motor testing
- Define g_twai_bus_off in vesc_can.c, declare in vesc_can.h (was
  referenced in main.c but never defined — build would fail)
- Add TWAI bus-off detection in vesc_can_rx_task
- main.c already has armed=true bypass and 1Hz gate diagnostics
  (added by another agent) — now compiles cleanly

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-04-19 23:01:24 -04:00

132 lines
4.8 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* main.c — ESP32-S3 BALANCE app_main (bd-66hx + OTA beads) */
#include "orin_serial.h"
#include "vesc_can.h"
#include "config.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "esp_log.h"
#include "esp_timer.h"
#include <string.h>
static const char *TAG = "main";
static QueueHandle_t s_orin_tx_q;
/* ── Telemetry task: sends TELEM_STATUS to Orin at 10 Hz ── */
static void telem_task(void *arg)
{
for (;;) {
vTaskDelay(pdMS_TO_TICKS(TELEM_STATUS_PERIOD_MS));
uint32_t now_ms = (uint32_t)(esp_timer_get_time() / 1000LL);
bool hb_timeout = (now_ms - g_orin_ctrl.hb_last_ms) > HB_TIMEOUT_MS;
/* Determine balance state for telemetry */
bal_state_t state;
if (g_orin_ctrl.estop) {
state = BAL_ESTOP;
} else if (!g_orin_ctrl.armed) {
state = BAL_DISARMED;
} else {
state = BAL_ARMED;
}
/* flags: bit0=estop_active, bit1=heartbeat_timeout, bit2=twai_bus_off */
uint8_t flags = (g_orin_ctrl.estop ? 0x01u : 0x00u) |
(hb_timeout ? 0x02u : 0x00u) |
(g_twai_bus_off ? 0x04u : 0x00u);
/* Battery voltage from VESC_ID_A STATUS_5 (V×10 → mV) */
uint16_t vbat_mv = (uint16_t)((int32_t)g_vesc[0].voltage_x10 * 100);
orin_send_status(s_orin_tx_q,
0, /* pitch_x10: stub — full IMU in future bead */
0, /* motor_cmd: stub */
vbat_mv,
state,
flags);
}
}
/* ── Drive task: applies Orin drive commands to VESCs @ 50 Hz ── */
static void drive_task(void *arg)
{
uint32_t log_tick = 0;
bool was_driving = false;
for (;;) {
vTaskDelay(pdMS_TO_TICKS(20)); /* 50 Hz */
uint32_t now_ms = (uint32_t)(esp_timer_get_time() / 1000LL);
bool hb_timeout = (now_ms - g_orin_ctrl.hb_last_ms) > HB_TIMEOUT_MS;
bool drive_stale = (now_ms - g_orin_drive.updated_ms) > DRIVE_TIMEOUT_MS;
bool gates_ok = g_orin_ctrl.armed && !g_orin_ctrl.estop &&
!hb_timeout && !drive_stale;
int32_t left_erpm = 0;
int32_t right_erpm = 0;
if (gates_ok) {
int32_t spd = (int32_t)g_orin_drive.speed * RPM_PER_SPEED_UNIT;
int32_t str = (int32_t)g_orin_drive.steer * RPM_PER_STEER_UNIT;
left_erpm = spd + str;
right_erpm = spd - str;
if (!was_driving) {
ESP_LOGI(TAG, "drive ENABLED: spd=%d str=%d L=%ld R=%ld",
g_orin_drive.speed, g_orin_drive.steer,
(long)left_erpm, (long)right_erpm);
was_driving = true;
}
} else if (was_driving) {
ESP_LOGW(TAG, "drive BLOCKED: armed=%d estop=%d hb_timeout=%d drive_stale=%d",
g_orin_ctrl.armed, g_orin_ctrl.estop, hb_timeout, drive_stale);
was_driving = false;
}
/* 1 Hz gate-state diagnostic */
if ((now_ms - log_tick) >= 1000u) {
log_tick = now_ms;
ESP_LOGI(TAG, "gate: armed=%d estop=%d hb_age=%lums drv_age=%lums twai_off=%d L=%ld R=%ld",
g_orin_ctrl.armed, g_orin_ctrl.estop,
(unsigned long)(now_ms - g_orin_ctrl.hb_last_ms),
(unsigned long)(now_ms - g_orin_drive.updated_ms),
(int)g_twai_bus_off,
(long)left_erpm, (long)right_erpm);
}
/* VESC_ID_A (56) = LEFT, VESC_ID_B (68) = RIGHT per bd-wim1 protocol */
vesc_can_send_rpm(VESC_ID_A, left_erpm);
vesc_can_send_rpm(VESC_ID_B, right_erpm);
}
}
void app_main(void)
{
ESP_LOGI(TAG, "ESP32-S3 BALANCE starting");
/* Init peripherals */
orin_serial_init();
vesc_can_init();
/* TX queue for outbound serial frames */
s_orin_tx_q = xQueueCreate(ORIN_TX_QUEUE_DEPTH, sizeof(orin_tx_frame_t));
configASSERT(s_orin_tx_q);
/* Seed timers so we don't immediately trip hb_timeout or drive_stale */
g_orin_ctrl.hb_last_ms = (uint32_t)(esp_timer_get_time() / 1000LL);
g_orin_drive.updated_ms = g_orin_ctrl.hb_last_ms;
g_orin_ctrl.armed = true; /* bypass for motor testing */
/* Create tasks */
xTaskCreate(orin_serial_rx_task, "orin_rx", 4096, s_orin_tx_q, 10, NULL);
xTaskCreate(orin_serial_tx_task, "orin_tx", 2048, s_orin_tx_q, 9, NULL);
xTaskCreate(vesc_can_rx_task, "vesc_rx", 4096, s_orin_tx_q, 10, NULL);
xTaskCreate(telem_task, "telem", 2048, NULL, 5, NULL);
xTaskCreate(drive_task, "drive", 2048, NULL, 8, NULL);
ESP_LOGI(TAG, "all tasks started");
/* app_main returns — FreeRTOS scheduler continues */
}