Mamba F722S MK2 does not expose PB12/PB13 externally. Waveshare CAN
module is wired to the SCL (PB8) and SDA (PB9) header pads.
Changes in can_driver_init():
- Drop __HAL_RCC_CAN2_CLK_ENABLE() — CAN1 needs no slave clock
- GPIO: GPIO_PIN_12/13 → GPIO_PIN_8/9, GPIO_AF9_CAN2 → GPIO_AF9_CAN1
- Instance: CAN2 → CAN1
- Filter bank: 14 → 0 (CAN1 master banks start at 0; bank 14 is the
CAN2 slave-start boundary, unused here)
I2C1 is free: BME280 has been moved to I2C2 (PB10/PB11), so PB8/PB9
are available for CAN1 without any peripheral conflict.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
sl-firmware
14c80dc33c