|
|
fa75c442a7
|
feat: remove all STM32/Mamba/BlackPill references — ESP32-S3 only
Archive STM32 firmware to legacy/stm32/:
- src/, include/, lib/USB_CDC/, platformio.ini, test stubs, flash_firmware.py
- test/test_battery_adc.c, test_hw_button.c, test_pid_schedule.c, test_vesc_can.c, test_can_watchdog.c
- USB_CDC_BUG.md
Rename: stm32_protocol → esp32_protocol, mamba_protocol → balance_protocol,
stm32_cmd_node → esp32_cmd_node, stm32_cmd_params → esp32_cmd_params,
stm32_cmd.launch.py → esp32_cmd.launch.py,
test_stm32_protocol → test_esp32_protocol, test_stm32_cmd_node → test_esp32_cmd_node
Content cleanup across all files:
- Mamba F722S → ESP32-S3 BALANCE
- BlackPill → ESP32-S3 IO
- STM32F722/F7xx → ESP32-S3
- stm32Mode/Version/Port → esp32Mode/Version/Port
- STM32 State/Mode labels → ESP32 State/Mode
- Jetson Nano → Jetson Orin Nano Super
- /dev/stm32 → /dev/esp32
- stm32_bridge → esp32_bridge
- STM32 HAL → ESP-IDF
docs/SALTYLAB.md:
- Update "Drone FC Details" to describe ESP32-S3 BALANCE board (Waveshare ESP32-S3 Touch LCD 1.28)
- Replace verbose "Self-Balancing Control" STM32 section with brief note pointing to SAUL-TEE-SYSTEM-REFERENCE.md
TEAM.md: Update Embedded Firmware Engineer role to ESP32-S3 / ESP-IDF
No new functionality — cleanup only.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 09:00:38 -04:00 |
|
|
|
f71dad5344
|
feat(arch): migrate all STM32/Mamba/BlackPill refs to ESP32 BALANCE/IO + fix roslib@1.4.0
Architecture change (2026-04-03): Mamba F722S (STM32F722) and BlackPill
replaced by ESP32 BALANCE (PID loop) and ESP32 IO (motors/sensors/comms).
- Update CLAUDE.md, docs, chassis BOM/ASSEMBLY, pinout, power-budget,
wiring-diagram, TEAM.md, AUTONOMOUS_ARMING.md, docker-compose
- Update all ROS2 package comments, config labels, launch args
(stm32_port→esp32_port, /dev/stm32-bridge→/dev/esp32-bridge)
- Update WebUI: stm32Mode→esp32Mode, stm32Version→esp32Version,
"STM32 State/Mode" labels → "ESP32 State/Mode" (ControlMode, SettingsPanel)
- Add TODO(esp32-migration) markers on stm32_protocol.py and mamba_protocol.py
binary frame layouts — pending ESP32 protocol spec from max
- Fix roslib CDN 1.3.0→1.4.0 in all 11 HTML panels (fixes ROS2 Humble
rosbridge "Received a message without an op" incompatibility)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:25:24 -04:00 |
|
|
|
60e16dc6ca
|
feat: Add URDF robot description (Issue #477)
|
2026-03-05 14:42:49 -05:00 |
|
|
|
b4bb6a44e0
|
feat: Phase 2a URDF robot description for SLAM and Nav2
Add saltybot_description ROS2 package with full kinematic model:
urdf/saltybot.urdf.xacro
- base_footprint → base_link (axle_height = 0.310m, from AXLE_HEIGHT SCAD)
- wheel_left/right_link (continuous, separation=0.600m, radius=0.1015m)
- imu_link (FC/MPU-6000 at x=+50mm forward, z=+12mm)
- stem_link (visual: 38.1mm EMT, 1.050m — from stem_battery_clamp.scad)
- sensor_head_link at top of stem
- laser (RPLIDAR A1M8, z=COL_H=36mm — frame matches slam_toolbox config)
- camera_link (RealSense D435i, ARM_R=50mm — matches realsense2_camera)
- camera_{front,left,rear,right}_link (IMX219, 10° down tilt, ARM_R=50mm
— positions match camera_tf.launch.py; that file superseded when live)
config/saltybot_properties.yaml
All dimensions from chassis/chassis_frame.scad + ASSEMBLY.md Rev A.
launch/robot_description.launch.py
Compiles xacro at launch time, runs robot_state_publisher.
Publishes /robot_description + /tf_static for all fixed joints.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 22:57:58 -05:00 |
|
