|
|
f71dad5344
|
feat(arch): migrate all STM32/Mamba/BlackPill refs to ESP32 BALANCE/IO + fix roslib@1.4.0
Architecture change (2026-04-03): Mamba F722S (STM32F722) and BlackPill
replaced by ESP32 BALANCE (PID loop) and ESP32 IO (motors/sensors/comms).
- Update CLAUDE.md, docs, chassis BOM/ASSEMBLY, pinout, power-budget,
wiring-diagram, TEAM.md, AUTONOMOUS_ARMING.md, docker-compose
- Update all ROS2 package comments, config labels, launch args
(stm32_port→esp32_port, /dev/stm32-bridge→/dev/esp32-bridge)
- Update WebUI: stm32Mode→esp32Mode, stm32Version→esp32Version,
"STM32 State/Mode" labels → "ESP32 State/Mode" (ControlMode, SettingsPanel)
- Add TODO(esp32-migration) markers on stm32_protocol.py and mamba_protocol.py
binary frame layouts — pending ESP32 protocol spec from max
- Fix roslib CDN 1.3.0→1.4.0 in all 11 HTML panels (fixes ROS2 Humble
rosbridge "Received a message without an op" incompatibility)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:25:24 -04:00 |
|
|
|
921eaba8b3
|
feat: WebUI settings and configuration panel (Issue #614)
Standalone ui/settings_panel.{html,js,css} — no build step.
Sections / tabs:
- PID: balance_controller (Kp/Ki/Kd/i_clamp/rate),
adaptive_pid (kp/ki/kd per load profile, output bounds)
- Speed: tank_driver (max_linear_vel, max_angular_vel, slip_factor),
smooth_velocity_controller (accel/decel limits),
battery_speed_limiter (speed factors)
- Safety: safety_zone (danger_range_m, warn_range_m, forward_arc_deg,
debounce, min_valid_range, publish_rate),
power_supervisor_node (battery % thresholds, speed factors),
lidar_avoidance (e-stop distance, safety zone sizes)
- Sensors: boolean toggles (estop_all_arcs, lidar_enabled, uwb_enabled),
uwb_imu_fusion weights and publish rate
- System: live /diagnostics subscriber (CPU/GPU/board/motor temps,
RAM/GPU/disk usage, WiFi RSSI+latency, MQTT status, last-update),
/rosapi/nodes node list
ROS2 parameter services (rcl_interfaces/srv/GetParameters +
SetParameters) via rosbridge WebSocket. Each section has independent
↓ LOAD (get_parameters) and ↑ APPLY (set_parameters) buttons with
success/error status feedback.
Presets: save/load/delete named snapshots of all values to
localStorage. Reset-to-defaults button restores built-in defaults.
Changed fields highlighted in amber (slider thumb + input border).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-03-15 10:08:47 -04:00 |
|
