Tag firmware (esp32/uwb_tag):
- SSD1306 128x64 OLED: shows distance, anchor ranges, RSSI bars, link status
- ESP-NOW broadcast: sends range/heartbeat/estop packets (20 bytes, peer-to-peer)
- Emergency stop: GPIO 0 (BOOT), active LOW, 10Hz TX while held, 3x clear on release
- Display updates at 5Hz, ranging still at 20Hz round-robin
- Added Adafruit SSD1306 + GFX lib_deps to platformio.ini
Anchor firmware (esp32/uwb_anchor):
- ESP-NOW receiver: captures tag packets via ISR ring buffer
- Forwards to Jetson serial as +ESPNOW: and +ESTOP: lines
- E-STOP packets get priority immediate output
- Zero impact on existing TWR ranging loop
For Makerfabs ESP32 UWB Pro with Display (DW3000 chip).
Anchor firmware for Makerfabs ESP32 UWB Pro (DW3000 chip). Two anchors
mount on SaltyBot (port/starboard), USB-connected to Jetson Orin.
- DS-TWR responder: Poll→Resp→Final with ±10cm accuracy
- Streams +RANGE:<id>,<mm>,<rssi_dbm> on Serial 115200
- AT command interface: AT+RANGE?, AT+RANGE_ADDR=, AT+ID?
- ANCHOR_ID 0/1 set at build time (env:anchor0 / env:anchor1)
- PlatformIO config for Makerfabs MaUWB_DW3000 library
- udev rules for /dev/uwb-anchor0 /dev/uwb-anchor1 USB symlinks
- Pin map: SCK=18 MISO=19 MOSI=23 CS=21 RST=27 IRQ=34
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
