|
|
291dd689f8
|
feat: remove all STM32/Mamba/BlackPill references — ESP32-S3 only
Archive STM32 firmware to legacy/stm32/:
- src/, include/, lib/USB_CDC/, platformio.ini, test stubs, flash_firmware.py
- test/test_battery_adc.c, test_hw_button.c, test_pid_schedule.c, test_vesc_can.c, test_can_watchdog.c
- USB_CDC_BUG.md
Rename: stm32_protocol → esp32_protocol, mamba_protocol → balance_protocol,
stm32_cmd_node → esp32_cmd_node, stm32_cmd_params → esp32_cmd_params,
stm32_cmd.launch.py → esp32_cmd.launch.py,
test_stm32_protocol → test_esp32_protocol, test_stm32_cmd_node → test_esp32_cmd_node
Content cleanup across all files:
- Mamba F722S → ESP32-S3 BALANCE
- BlackPill → ESP32-S3 IO
- STM32F722/F7xx → ESP32-S3
- stm32Mode/Version/Port → esp32Mode/Version/Port
- STM32 State/Mode labels → ESP32 State/Mode
- Jetson Nano → Jetson Orin Nano Super
- /dev/stm32 → /dev/esp32
- stm32_bridge → esp32_bridge
- STM32 HAL → ESP-IDF
docs/SALTYLAB.md:
- Update "Drone FC Details" to describe ESP32-S3 BALANCE board (Waveshare ESP32-S3 Touch LCD 1.28)
- Replace verbose "Self-Balancing Control" STM32 section with brief note pointing to SAUL-TEE-SYSTEM-REFERENCE.md
TEAM.md: Update Embedded Firmware Engineer role to ESP32-S3 / ESP-IDF
No new functionality — cleanup only.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:41:26 -04:00 |
|
|
|
3755e235aa
|
feat: Orin Nano Super platform update + 4x IMX219 CSI cameras
Task A — Orin Nano Super platform update:
- docker-compose.yml: update header/comments, switch all service image tags
to jetson-orin, update devices to udev symlinks (/dev/rplidar,
/dev/stm32-bridge, i2c-7), add NVMe volume mounts (/mnt/nvme/saltybot),
update stm32-bridge to saltybot_bridge launch, add csi-cameras service
- docs/pinout.md: full rewrite for Orin Nano Super — i2c-7, ttyTHS0,
CSI-A/B connectors, M.2 NVMe slot, IMX219 15-pin FFC pinout, V4L2 nodes,
GStreamer test commands, updated udev rules
- docs/power-budget.md: full rewrite — 25W TDP, 8GB LPDDR5, 67 TOPS,
4-camera CSI bandwidth analysis, nvpmodel modes, Nano vs Orin comparison,
5V 6A PSU recommendation, 4S LiPo architecture
- scripts/setup-jetson.sh: full rewrite — JetPack 6 / Ubuntu 22.04,
nvidia-container-toolkit new keyring method, NVMe partition/format/fstab,
CSI driver check (imx219 modprobe), video group, jtop install, 8GB swap
Task B — saltybot_cameras ROS2 package:
- launch/csi_cameras.launch.py: 4x v4l2_camera nodes, namespace per camera
(front/left/rear/right), 640x480x30fps, includes TF launch automatically
- launch/camera_tf.launch.py: static TF for 4 cameras at 90deg intervals
on sensor_head_link (r=5cm offset), yaw 0/90/180/-90 deg
- package.xml, setup.py, setup.cfg, __init__.py, resource marker
- config/cameras_params.yaml: per-camera device/frame/offset configuration
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 22:59:13 -05:00 |
|
|
|
c47ac41573
|
feat: Jetson Nano platform setup and Docker env (bd-1hcg)
- Dockerfile: L4T R32.6.1 (JetPack 4.6) base + ROS2 Humble + SLAM stack
(slam_toolbox, Nav2, rplidar_ros, realsense2_camera, robot_localization)
- docker-compose.yml: multi-service stack (ROS2, RPLIDAR A1M8, D435i, STM32 bridge)
with device passthrough, host networking for DDS, persistent map volume
- docs/pinout.md: full GPIO/I2C/UART pinout for STM32F722 bridge (USB CDC +
UART fallback), RealSense D435i (USB3), RPLIDAR A1M8, udev rules
- docs/power-budget.md: 10W envelope analysis with per-component breakdown,
mitigation strategies (RPLIDAR gating, D435i 640p, nvpmodel modes)
- scripts/setup-jetson.sh: host one-shot setup (Docker, nvidia-container-runtime,
udev rules, MAXN power mode, swap)
- scripts/build-and-run.sh: build/up/down/shell/slam/status helper
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 12:46:14 -05:00 |
|
