|
|
291dd689f8
|
feat: remove all STM32/Mamba/BlackPill references — ESP32-S3 only
Archive STM32 firmware to legacy/stm32/:
- src/, include/, lib/USB_CDC/, platformio.ini, test stubs, flash_firmware.py
- test/test_battery_adc.c, test_hw_button.c, test_pid_schedule.c, test_vesc_can.c, test_can_watchdog.c
- USB_CDC_BUG.md
Rename: stm32_protocol → esp32_protocol, mamba_protocol → balance_protocol,
stm32_cmd_node → esp32_cmd_node, stm32_cmd_params → esp32_cmd_params,
stm32_cmd.launch.py → esp32_cmd.launch.py,
test_stm32_protocol → test_esp32_protocol, test_stm32_cmd_node → test_esp32_cmd_node
Content cleanup across all files:
- Mamba F722S → ESP32-S3 BALANCE
- BlackPill → ESP32-S3 IO
- STM32F722/F7xx → ESP32-S3
- stm32Mode/Version/Port → esp32Mode/Version/Port
- STM32 State/Mode labels → ESP32 State/Mode
- Jetson Nano → Jetson Orin Nano Super
- /dev/stm32 → /dev/esp32
- stm32_bridge → esp32_bridge
- STM32 HAL → ESP-IDF
docs/SALTYLAB.md:
- Update "Drone FC Details" to describe ESP32-S3 BALANCE board (Waveshare ESP32-S3 Touch LCD 1.28)
- Replace verbose "Self-Balancing Control" STM32 section with brief note pointing to SAUL-TEE-SYSTEM-REFERENCE.md
TEAM.md: Update Embedded Firmware Engineer role to ESP32-S3 / ESP-IDF
No new functionality — cleanup only.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:41:26 -04:00 |
|
|
|
a70d9a2a71
|
feat(mechanical): IP54 weatherproofing kit (Issue #144)
Add sealed enclosures and sensor housings for outdoor IP54 protection:
- ip54_enclosure.scad: main electronics box (Jetson/FC/ESC), O-ring lid,
fan+filter duct, PG7/PG9 cable glands, quarter-turn latches, heat sink
recesses; gasket DXF export
- ip54_sensor_housings.scad: IMX219 clear PC dome (O-ring + anti-fog
pocket), D435i IR-transparent window housing (PG7 rear cap), RPLIDAR
static clear PC dome base ring (120 mm OD, O-ring, quarter-turn clips)
- ip54_BOM.md: hardware list, thermal analysis (≤52°C at 40°C ambient),
IP54 compliance checklist, mass ~930g total kit
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-03-02 09:58:22 -05:00 |
|
