Adds prototype_baseplate.scad — a laser-cuttable / CNC-routable flat
base plate for the self-balancing robot using caliper-verified axle
dimensions from the wiki (replaces placeholder values in PR #7):
Axle base dia: 16.11 mm (was 14 mm)
D-cut OD: 15.95 mm (new)
D-cut flat chord: 13.00 mm (new)
Total protrusion: 65.50 mm
Bearing seat OD: 37.80 mm
Tire OD: 254 mm (10x2.125")
Axle CL height: 127 mm (was wrong 310 mm)
Design:
- Single flat plate (6 mm Al / 8 mm acrylic), 680x220 mm blank
- Open fork slots (16.51 mm, semicircular tip) at each axle end
- Bearing seat relief cutout prevents Ø37.8 mm collar binding on edge
- Two-piece dropout clamp: lower (round bore) + upper (D-cut bore)
- D-cut profile computed from chord geometry with 0.3 mm all-round clearance
- MAMBA F722S FC holes (30.5x30.5 mm M3), battery mount holes (M4)
- Lightening slots, corner radii via minkowski
- RENDER param switches between 3-D assembly and 2-D DXF projections
for each of the three laser-cut parts
Updates BOM.md to Rev B: measurement delta table, prototype BOM section,
updated motor entry with verified axle spec.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
