sl-webui
f71dad5344
Architecture change (2026-04-03): Mamba F722S (STM32F722) and BlackPill replaced by ESP32 BALANCE (PID loop) and ESP32 IO (motors/sensors/comms). - Update CLAUDE.md, docs, chassis BOM/ASSEMBLY, pinout, power-budget, wiring-diagram, TEAM.md, AUTONOMOUS_ARMING.md, docker-compose - Update all ROS2 package comments, config labels, launch args (stm32_port→esp32_port, /dev/stm32-bridge→/dev/esp32-bridge) - Update WebUI: stm32Mode→esp32Mode, stm32Version→esp32Version, "STM32 State/Mode" labels → "ESP32 State/Mode" (ControlMode, SettingsPanel) - Add TODO(esp32-migration) markers on stm32_protocol.py and mamba_protocol.py binary frame layouts — pending ESP32 protocol spec from max - Fix roslib CDN 1.3.0→1.4.0 in all 11 HTML panels (fixes ROS2 Humble rosbridge "Received a message without an op" incompatibility) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
52 lines
2.0 KiB
Markdown
52 lines
2.0 KiB
Markdown
# Nav2 Recovery Behaviors Configuration
|
|
|
|
**Issue #479**: Configure conservative recovery behaviors for SaltyBot autonomous navigation.
|
|
|
|
## Overview
|
|
|
|
Recovery behaviors are triggered when Nav2 encounters navigation failures (path following failures, stuck detection, etc.). The recovery system attempts multiple strategies before giving up.
|
|
|
|
## Configuration Details
|
|
|
|
### Backup Recovery (Issue #479)
|
|
- **Distance**: 0.3 meters reverse
|
|
- **Speed**: 0.1 m/s (very conservative for FC + Hoverboard ESC)
|
|
- **Max velocity**: 0.15 m/s (absolute limit)
|
|
- **Time limit**: 5 seconds maximum
|
|
|
|
### Spin Recovery
|
|
- **Angle**: 1.57 radians (90°)
|
|
- **Max angular velocity**: 0.5 rad/s (conservative for self-balancing robot)
|
|
- **Min angular velocity**: 0.25 rad/s
|
|
- **Angular acceleration**: 1.6 rad/s² (half of normal to ensure smooth motion)
|
|
- **Time limit**: 10 seconds
|
|
|
|
### Wait Recovery
|
|
- **Duration**: 5 seconds
|
|
- **Purpose**: Allow dynamic obstacles (people, other robots) to clear the path
|
|
|
|
### Progress Checker (Issue #479)
|
|
- **Minimum movement threshold**: 0.2 meters (20 cm)
|
|
- **Time window**: 10 seconds
|
|
- **Behavior**: If the robot doesn't move 20cm in 10 seconds, trigger recovery sequence
|
|
|
|
## Safety: E-Stop Priority (Issue #459)
|
|
|
|
The emergency stop system (Issue #459, `saltybot_emergency` package) runs independently of Nav2 and takes absolute priority.
|
|
|
|
Recovery behaviors cannot interfere with E-stop because the emergency system operates at the motor driver level on the ESP32 BALANCE firmware.
|
|
|
|
## Behavior Tree Sequence
|
|
|
|
Recovery runs in a round-robin fashion with up to 6 retry cycles.
|
|
|
|
## Constraints for FC + Hoverboard ESC
|
|
|
|
This configuration is specifically tuned for:
|
|
- **Drivetrain**: Flux Capacitor (FC) balancing controller + Hoverboard brushless ESC
|
|
- **Max linear velocity**: 1.0 m/s
|
|
- **Max angular velocity**: 1.5 rad/s
|
|
- **Recovery velocity constraints**: 50% of normal for stability
|
|
|
|
The conservative recovery speeds ensure smooth deceleration profiles on the self-balancing drivetrain without tipping or oscillation.
|