sl-firmware
b830420efc
Replaces Orin↔ESP32-S3 BALANCE CAN comms (0x300-0x303 / 0x400-0x401)
with binary serial framing over CH343 USB-CDC at 460800 baud.
Protocol matches bd-wim1 (sl-perception) exactly:
Frame: [0xAA][LEN][TYPE][PAYLOAD][CRC8-SMBUS]
CRC covers LEN+TYPE+PAYLOAD, big-endian multi-byte fields.
Commands (Orin→ESP32): HEARTBEAT/DRIVE/ESTOP/ARM/PID
Telemetry (ESP32→Orin): TELEM_STATUS, TELEM_VESC_LEFT (ID 56),
TELEM_VESC_RIGHT (ID 68), ACK/NACK
VESC CAN TWAI kept for motor control; drive commands from Orin
forwarded to VESCs via SET_RPM. Hardware note: SN65HVD230
rewired from IO43/44 to IO2/IO1 to free IO43/44 for CH343.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
112 lines
3.8 KiB
C
112 lines
3.8 KiB
C
/* main.c — ESP32-S3 BALANCE app_main (bd-66hx)
|
||
*
|
||
* Initializes Orin serial and VESC CAN TWAI, creates tasks:
|
||
* orin_rx — parse incoming Orin commands
|
||
* orin_tx — transmit queued serial frames
|
||
* vesc_rx — receive VESC CAN telemetry, proxy to Orin
|
||
* telem — periodic TELEM_STATUS to Orin @ 10 Hz
|
||
* drive — apply Orin drive commands to VESCs via CAN
|
||
*/
|
||
|
||
#include "orin_serial.h"
|
||
#include "vesc_can.h"
|
||
#include "config.h"
|
||
#include "freertos/FreeRTOS.h"
|
||
#include "freertos/task.h"
|
||
#include "freertos/queue.h"
|
||
#include "esp_log.h"
|
||
#include "esp_timer.h"
|
||
#include <string.h>
|
||
|
||
static const char *TAG = "main";
|
||
|
||
static QueueHandle_t s_orin_tx_q;
|
||
|
||
/* ── Telemetry task: sends TELEM_STATUS to Orin at 10 Hz ── */
|
||
static void telem_task(void *arg)
|
||
{
|
||
for (;;) {
|
||
vTaskDelay(pdMS_TO_TICKS(TELEM_STATUS_PERIOD_MS));
|
||
|
||
uint32_t now_ms = (uint32_t)(esp_timer_get_time() / 1000LL);
|
||
bool hb_timeout = (now_ms - g_orin_ctrl.hb_last_ms) > HB_TIMEOUT_MS;
|
||
|
||
/* Determine balance state for telemetry */
|
||
bal_state_t state;
|
||
if (g_orin_ctrl.estop) {
|
||
state = BAL_ESTOP;
|
||
} else if (!g_orin_ctrl.armed) {
|
||
state = BAL_DISARMED;
|
||
} else {
|
||
state = BAL_ARMED;
|
||
}
|
||
|
||
/* flags: bit0=estop_active, bit1=heartbeat_timeout */
|
||
uint8_t flags = (g_orin_ctrl.estop ? 0x01u : 0x00u) |
|
||
(hb_timeout ? 0x02u : 0x00u);
|
||
|
||
/* Battery voltage from VESC_ID_A STATUS_5 (V×10 → mV) */
|
||
uint16_t vbat_mv = (uint16_t)((int32_t)g_vesc[0].voltage_x10 * 100);
|
||
|
||
orin_send_status(s_orin_tx_q,
|
||
0, /* pitch_x10: stub — full IMU in future bead */
|
||
0, /* motor_cmd: stub */
|
||
vbat_mv,
|
||
state,
|
||
flags);
|
||
}
|
||
}
|
||
|
||
/* ── Drive task: applies Orin drive commands to VESCs @ 50 Hz ── */
|
||
static void drive_task(void *arg)
|
||
{
|
||
for (;;) {
|
||
vTaskDelay(pdMS_TO_TICKS(20)); /* 50 Hz */
|
||
|
||
uint32_t now_ms = (uint32_t)(esp_timer_get_time() / 1000LL);
|
||
bool hb_timeout = (now_ms - g_orin_ctrl.hb_last_ms) > HB_TIMEOUT_MS;
|
||
bool drive_stale = (now_ms - g_orin_drive.updated_ms) > DRIVE_TIMEOUT_MS;
|
||
|
||
int32_t left_erpm = 0;
|
||
int32_t right_erpm = 0;
|
||
|
||
if (g_orin_ctrl.armed && !g_orin_ctrl.estop &&
|
||
!hb_timeout && !drive_stale) {
|
||
int32_t spd = (int32_t)g_orin_drive.speed * RPM_PER_SPEED_UNIT;
|
||
int32_t str = (int32_t)g_orin_drive.steer * RPM_PER_STEER_UNIT;
|
||
left_erpm = spd + str;
|
||
right_erpm = spd - str;
|
||
}
|
||
|
||
/* VESC_ID_A (56) = LEFT, VESC_ID_B (68) = RIGHT per bd-wim1 protocol */
|
||
vesc_can_send_rpm(VESC_ID_A, left_erpm);
|
||
vesc_can_send_rpm(VESC_ID_B, right_erpm);
|
||
}
|
||
}
|
||
|
||
void app_main(void)
|
||
{
|
||
ESP_LOGI(TAG, "ESP32-S3 BALANCE bd-66hx starting");
|
||
|
||
/* Init peripherals */
|
||
orin_serial_init();
|
||
vesc_can_init();
|
||
|
||
/* TX queue for outbound serial frames */
|
||
s_orin_tx_q = xQueueCreate(ORIN_TX_QUEUE_DEPTH, sizeof(orin_tx_frame_t));
|
||
configASSERT(s_orin_tx_q);
|
||
|
||
/* Seed heartbeat timer so we don't immediately timeout */
|
||
g_orin_ctrl.hb_last_ms = (uint32_t)(esp_timer_get_time() / 1000LL);
|
||
|
||
/* Create tasks */
|
||
xTaskCreate(orin_serial_rx_task, "orin_rx", 4096, s_orin_tx_q, 10, NULL);
|
||
xTaskCreate(orin_serial_tx_task, "orin_tx", 2048, s_orin_tx_q, 9, NULL);
|
||
xTaskCreate(vesc_can_rx_task, "vesc_rx", 4096, s_orin_tx_q, 10, NULL);
|
||
xTaskCreate(telem_task, "telem", 2048, NULL, 5, NULL);
|
||
xTaskCreate(drive_task, "drive", 2048, NULL, 8, NULL);
|
||
|
||
ESP_LOGI(TAG, "all tasks started");
|
||
/* app_main returns — FreeRTOS scheduler continues */
|
||
}
|