- bmp280.c: detect BME280 (chip_id 0x60) vs BMP280 (0x58) at init
- bmp280.c: read humidity calibration (dig_H1–H6) from 0xA1 and 0xE1–0xE7
- bmp280.c: set ctrl_hum (0xF2, osrs_h=×16) before ctrl_meas — hardware req
- bmp280.c: add bmp280_read_humidity() — float compensation (FPv5-SP FPU),
returns %RH × 10; -1 if chip is BMP280 or not initialised
- bmp280.h: add bmp280_read_humidity() declaration + timeout note
- main.c: baro_ok → baro_chip (stores chip_id for BME280 detection)
- main.c: telemetry adds t (°C×10), pa (hPa×10) for all barometers;
adds h (%RH×10) for BME280 only; alt unchanged
- ui/index.html: hidden TEMP/HUMIDITY/PRESSURE rows, revealed on first
packet containing t/h/pa fields; values shown with 1 dp
I2C hang safety: all HAL_I2C_Mem_Read/Write use 100ms timeouts, so
missing hardware (NAK) returns in <1ms, not after a hang.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
sl-firmware
ca23407ceb