Protects expensive sensors when robot tips over during testing.
Files added:
chassis/bumper_frame.scad — roll cage (25 mm stem collar + 4 inclined
posts + crown ring + TPU snap pad). Posts at
45/135/225/315° between cameras. Crown at
Z=148 mm above cage collar, 18 mm above RPLIDAR
top. RPLIDAR FOV unobstructed.
chassis/base_bumper.scad — clip-on bumper ring for 270×240 mm base plate.
50 mm tall, 15 mm standoff, rounded corners.
4× corner + 4× side clip brackets. TPU snap
edge caps. FC status LEDs remain visible.
chassis/stem_protector.scad — split TPU sleeve for 25 mm stem. Snap-fit
closure (no hardware). Install 3–4 sleeves
along stem at ~200 mm intervals.
chassis/bumper_BOM.md — full BOM, print settings, install heights,
mass estimate (~500 g total, balanced).
All parts print without supports. Fully removable (clip/snap/clamp).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
sl-mechanical
beb0af7ce6