sl-jetson
22aaeb02cf
STM32 firmware (C): - include/jetson_cmd.h: protocol constants (HB_TIMEOUT_MS=500, SPEED_MAX_DEG=4°), API for jetson_cmd_process/is_active/steer/sp_offset - src/jetson_cmd.c: main-loop parser for buffered C<spd>,<str> frames; setpoint offset = speed/1000 * 4°; steer clamped ±1000 - lib/USB_CDC/src/usbd_cdc_if.c: add H (heartbeat) and C (drive cmd) to CDC_Receive ISR — follows existing pattern: H updates jetson_hb_tick in ISR, C copied to jetson_cmd_buf for main-loop sscanf (avoids sscanf in IRQ) - src/main.c: integrate jetson_cmd — process buffered frame, apply setpoint offset around balance_update(), inject steer into motor_driver_update() only when heartbeat alive (fallback: steer=0, setpoint unchanged) ROS2 (Python): - saltybot_cmd_node.py: full bidirectional node — owns serial port, handles telemetry RX → topics AND /cmd_vel TX → C<spd>,<str>\n + H\n heartbeat 200ms timer; sends C0,0\n on shutdown; speed/steer_scale configurable - serial_bridge_node.py: add write_serial() helper for extensibility - launch/bridge.launch.py: mode arg (bidirectional|rx_only) selects node - config/bridge_params.yaml: heartbeat_period, speed_scale, steer_scale docs - test/test_cmd.py: 13 tests — zero, full fwd/rev, turn clamping, combined - setup.py: saltybot_cmd_node entry point All 21 tests pass (8 parse + 13 cmd). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>