sl-webui cfd5a15b3e feat(arch): implement SAUL-TEE ESP32 protocol specs from hal reference doc

Spec source: docs/SAUL-TEE-SYSTEM-REFERENCE.md (hal, 2026-04-04)

stm32_protocol.py — rewritten for inter-board UART protocol (ESP32 BALANCE ↔ IO):
- Frame: [0xAA][LEN][TYPE][PAYLOAD][CRC8] @ 460800 baud (was STX/ETX/CRC16)
- CRC-8 poly 0x07 over LEN+TYPE+PAYLOAD
- New message types: RC_CHANNELS(0x01), SENSORS(0x02), LED_CMD(0x10),
  OUTPUT_CMD(0x11), MOTOR_CMD(0x12), HEARTBEAT(0x20)

mamba_protocol.py — updated CAN IDs and frame formats:
- Orin→BALANCE: DRIVE(0x300) f32×2 LE, MODE(0x301), ESTOP(0x302), LED(0x303)
- BALANCE→Orin: FC_STATUS(0x400) pitch/vbat/state, FC_VESC(0x401) rpm/current
- VESC node IDs: Left=56, Right=68 (authoritative per §8)
- VESC extended frames: STATUS1(cmd=9), STATUS4(cmd=16), STATUS5(cmd=27)
- Replaced old MAMBA_CMD_*/MAMBA_TELEM_* constants

can_bridge_node.py — updated to use new IDs:
- ORIN_CMD_DRIVE/MODE/ESTOP replace MAMBA_CMD_VELOCITY/MODE/ESTOP
- FC_STATUS handler: publishes pitch→/can/imu, vbat_mv→/can/battery
- FC_VESC handler: publishes rpm/cur→/can/vesc/left|right/state
- VESC STATUS1 extended frames decoded per node ID (56/68)
- Removed PID CAN command (not in new spec)

CLAUDE.md — updated with ESP32-S3 BALANCE/IO hardware summary + key protocols

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

2026-04-04 08:25:24 -04:00

3.1 KiB

Raw Permalink Blame History

SaltyLab Firmware — Agent Playbook

Project

SAUL-TEE — 4-wheel wagon robot (870×510×550 mm, 23 kg). Two ESP32-S3 boards + Jetson Orin for AI/ROS2.

Full hardware spec: docs/SAUL-TEE-SYSTEM-REFERENCE.md

Embedded boards

Board	Hardware	Role
ESP32-S3 BALANCE	Waveshare Touch LCD 1.28 (CH343 USB)	QMI8658 IMU, PID balance loop, CAN→VESCs (SN65HVD230, 500 kbps)
ESP32-S3 IO	Bare DevKit (JTAG USB)	BTS7960 motors, TBS Crossfire (UART0) + ELRS failover (UART2), NFC/baro/ToF (I2C), WS2812 LEDs, horn/headlight/fan/buzzer

Key protocols

Orin ↔ BALANCE: CAN 500 kbps via CANable2 (slcan0). Cmds 0x300–0x303, telemetry 0x400–0x401
BALANCE ↔ IO: UART 460800 baud, frame [0xAA][LEN][TYPE][PAYLOAD][CRC8]
VESC IDs: Left = 56, Right = 68

Team

Agent	Role	Focus
sl-firmware	Embedded Firmware Lead	ESP32-S3 firmware (PlatformIO), QMI8658 IMU, PID, VESC CAN, inter-board UART
sl-controls	Control Systems Engineer	PID tuning, IMU sensor fusion, real-time control loops, safety systems
sl-perception	Perception / SLAM Engineer	Jetson Orin, RealSense D435i, RPLIDAR, ROS2, Nav2

Status

Architecture migrated from Mamba F722S/BlackPill → ESP32-S3 BALANCE + IO (PR #712, 2026-04-04).

Repo Structure

projects/saltybot/SALTYLAB.md — Design doc
USB_CDC_BUG.md — USB peripheral conflict details
TEAM.md — Team roles specification

Branch Strategy (issue #28)

Variant branches

Branch	Purpose
`saltylab`	Stable — SaltyLab 2-wheel balance bot (promoted from saltylab-dev)
`saltylab-dev`	Integration — SaltyLab balance bot; agents target this branch
`saltyrover`	Stable — 4-wheel rover variant
`saltyrover-dev`	Integration — rover variant
`saltytank`	Stable — tracked tank variant
`saltytank-dev`	Integration — tank variant
`main`	Shared code only (IMU drivers, USB CDC, balance core, safety)

Rules

Agents branch FROM <variant>-dev and PR back TO <variant>-dev
Shared/infrastructure code (IMU drivers, USB CDC, balance core, safety) goes in main
Variant-specific code (motor topology, kinematics, config) goes in variant branches
Stable branches get promoted from -dev after review and hardware testing
Current SaltyLab team works against saltylab-dev

Git Workflow

Branch naming: <agent>/<slug> (e.g., sl-firmware/usb-cdc-fix)
For shared code targeting main: <agent>/bd-<id>-<slug>
Before every push: git fetch origin && git rebase origin/<base-branch>
Gitea: gitea.vayrette.com/seb/saltylab-firmware

Communication

Report progress to max via MQTT: AGENT_NAME=<agent> ~/agent-mqtt/agent-send max "<message>"
Check inbox: ~/agent-mqtt/agent-read 2>/dev/null | tail -15
Prioritize messages from max (PM)

Beads (Task System)

cd /Users/seb/AI/saltylab-firmware
br list                    # List open beads
br update <id> --claim     # Claim a bead
br close <id> --reason "Done. PR #N"
br comment <id> "message"

3.1 KiB Raw Permalink Blame History Unescape Escape