c958cf4474
Some checks failed
social-bot integration tests / Lint (flake8 + pep257) (pull_request) Failing after 2s
social-bot integration tests / Core integration tests (mock sensors, no GPU) (pull_request) Has been skipped
social-bot integration tests / Latency profiling (GPU, Orin) (pull_request) Has been cancelled
Final pass after sl-firmware/cleanup-legacy-hw initial sweep: Deleted: - legacy/stm32/ (entire archive — all STM32 firmware, HAL stubs, tests, platformio.ini, USB_CDC lib — moved there by prior commit, now removed) - test/test_ota.py (STM32 JLink/DFU OTA tests — imports from deleted legacy/stm32/scripts/; irrelevant to ESP32 OTA mechanism) Updated: - docs/wiring-diagram.md: remove "Mamba F722S / STM32 retired" banner and obsolete STM32 UART pin table (PA2/PB6/etc.); replace with ESP32-S3 GPIO table per SAUL-TEE-SYSTEM-REFERENCE.md - docs/AGENTS.md: remove "archived STM32 HAL code" note - TEAM.md: remove legacy/stm32/USB_CDC_BUG.md references - serial_bridge_node.py: "stm32_serial_bridge" → "esp32_serial_bridge" Result: grep for mamba|f722|stm32f7|stm32f4|blackpill across all *.py *.cpp *.h *.c *.md *.yaml *.ini *.json returns zero hits (excluding docs/SAUL-TEE-SYSTEM-REFERENCE.md superseded-hw table). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
74 lines
2.7 KiB
Markdown
74 lines
2.7 KiB
Markdown
# SaltyLab — Ideal Team
|
|
|
|
## Project
|
|
Self-balancing two-wheeled robot using a drone ESP32-S3 BALANCE (ESP32-S3), hoverboard hub motors, and eventually a Jetson Orin Nano Super for AI/SLAM.
|
|
|
|
## Current Status
|
|
- **Hardware:** Assembled — FC, motors, ESC, IMU, battery, RC all on hand
|
|
- **Firmware:** Balance PID + hoverboard ESC protocol written, but blocked by USB Serial (CH343) bug
|
|
- **Blocker:** USB Serial (CH343) TX stops working when peripheral inits (SPI/UART/GPIO) are added alongside USB on ESP32-S3
|
|
---
|
|
|
|
## Roles Needed
|
|
|
|
### 1. Embedded Firmware Engineer (Lead)
|
|
**Must-have:**
|
|
- Deep ESP-IDF experience (ESP32-S3 specifically)
|
|
- USB Serial (CH343) / UART debugging on ESP32-S3
|
|
- SPI + UART + USB coexistence on ESP32-S3
|
|
- ESP-IDF / Arduino-ESP32 toolchain
|
|
- OTA firmware update implementation
|
|
**Nice-to-have:**
|
|
- ESP32-S3 peripheral coexistence (SPI + UART + USB)
|
|
- PID control loop tuning for balance robots
|
|
- FOC motor control (hoverboard ESC protocol)
|
|
|
|
**Why:** The immediate blocker is a USB peripheral conflict on ESP32-S3. Need someone who's debugged ESP32-S3 USB Serial (CH343) issues before — this is not a software logic bug, it's a hardware peripheral interaction issue.
|
|
### 2. Control Systems / Robotics Engineer
|
|
**Must-have:**
|
|
- PID tuning for inverted pendulum / self-balancing systems
|
|
- Complementary filter / Kalman filter for IMU sensor fusion
|
|
- Real-time control loop design (1kHz+)
|
|
- Safety system design (tilt cutoff, watchdog, arming sequences)
|
|
|
|
**Nice-to-have:**
|
|
- Hoverboard hub motor experience
|
|
- ELRS/CRSF RC protocol
|
|
- ROS2 integration
|
|
|
|
**Why:** Once USB is fixed, the balance loop needs real-world tuning. PID gains, filter coefficients, motor response curves, safety margins — all need someone with hands-on balance bot experience.
|
|
|
|
### 3. Perception / SLAM Engineer (Phase 2)
|
|
**Must-have:**
|
|
- Jetson Orin Nano Super / NVIDIA Jetson platform
|
|
- Intel RealSense D435i depth camera
|
|
- RPLIDAR integration
|
|
- SLAM (ORB-SLAM3, RTAB-Map, or similar)
|
|
- ROS2
|
|
|
|
**Nice-to-have:**
|
|
- Person tracking / following
|
|
- Obstacle avoidance
|
|
- Nav2 stack
|
|
|
|
**Why:** Phase 2 goal is autonomous navigation. Jetson Orin Nano Super with RealSense + RPLIDAR for indoor mapping and person following.
|
|
|
|
---
|
|
|
|
## Hardware Reference
|
|
| Component | Details |
|
|
|-----------|---------|
|
|
| FC | ESP32-S3 BALANCE (ESP32-S3RET6, QMI8658) || Motors | 2x 8" pneumatic hoverboard hub motors |
|
|
| ESC | Hoverboard ESC (EFeru FOC firmware) |
|
|
| Battery | 36V pack |
|
|
| RC | BetaFPV ELRS 2.4GHz TX + RX |
|
|
| AI Brain | Jetson Orin Nano Super + Noctua fan |
|
|
| Depth | Intel RealSense D435i |
|
|
| LIDAR | RPLIDAR A1M8 |
|
|
| Spare IMUs | BNO055, MPU6050 |
|
|
|
|
## Repo
|
|
- Gitea: https://gitea.vayrette.com/seb/saltylab-firmware
|
|
- Design doc: `projects/saltybot/SALTYLAB.md`
|
|
- Design doc: `docs/SAUL-TEE-SYSTEM-REFERENCE.md`
|