sl-android
|
f4e4f184ef
|
feat: WiFi mesh handoff - seamless AP roaming (Issue #458)
Add WiFi mesh handoff infrastructure:
WiFiState.msg interface:
- SSID, signal strength (dBm), connection status
- AP address, frequency, link quality
- TX/RX rates, roaming flag
- Available APs for handoff decision
WiFi Monitor Node:
- Signal monitoring via iwconfig/nmcli
- Auto-roam at -70dBm threshold
- Seamless wpa_supplicant roaming
- Gateway ping (8.8.8.8) every 5s
- USB tethering fallback if offline >30s
- TTS warnings for connectivity issues
- Coverage logging with AP transitions
Features:
- Configurable roaming threshold (-70dBm default)
- Gateway connectivity verification
- Offline detection with configurable timeout
- USB tethering auto-activation/deactivation
- Signal strength change logging (>5dBm)
- AP transition logging
- Manual rescan/tether control commands
Topics:
- /saltybot/wifi_state (String)
- /saltybot/speech_text (String warnings)
- /saltybot/wifi_cmd (String commands)
Configuration:
- interface: wlan0
- roam_threshold_dbm: -70
- offline_warning_timeout: 30.0
- target_ssid: SaltyLab
- fallback_tether: true
- coverage_log_file: /tmp/wifi_coverage.log
Roaming Behavior:
- Monitors signal continuously
- When signal < -70dBm, scans for stronger AP
- wpa_supplicant performs seamless handoff
- Logs all AP transitions to coverage file
Fallback Behavior:
- Pings gateway every 5 seconds
- If unreachable for >30s, activates USB tether
- TTS alert: 'Warning: Lost WiFi connectivity...'
- Auto-deactivates when WiFi restored
Coverage Mapping:
- Logs timestamp, SSID, signal, connected status
- Tracks roaming events
- Useful for mesh network optimization
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
|
2026-03-05 09:20:42 -05:00 |
|
|
|
9d36e1007d
|
feat: Add Issue #455 - Smooth velocity controller with jerk reduction
Implement acceleration-limited velocity controller with S-curve jerk limiting:
- Subscribe to /cmd_vel_raw, publish smoothed /cmd_vel
- Max linear acceleration: 0.5 m/s²
- Max angular acceleration: 1.0 rad/s²
- Deceleration: 0.8 m/s² (linear), 1.0 rad/s² (angular)
- S-curve jerk limiting for smooth acceleration profiles (0.2s ramp)
- E-stop immediate stop capability
- Command priority system (e-stop > teleop > geofence > follow-me > nav2 > patrol)
- Publish /saltybot/velocity_profile for monitoring
- Configurable via smooth_velocity_config.yaml
- 50Hz update rate (configurable)
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
|
2026-03-05 09:18:58 -05:00 |
|
