|
|
f71dad5344
|
feat(arch): migrate all STM32/Mamba/BlackPill refs to ESP32 BALANCE/IO + fix roslib@1.4.0
Architecture change (2026-04-03): Mamba F722S (STM32F722) and BlackPill
replaced by ESP32 BALANCE (PID loop) and ESP32 IO (motors/sensors/comms).
- Update CLAUDE.md, docs, chassis BOM/ASSEMBLY, pinout, power-budget,
wiring-diagram, TEAM.md, AUTONOMOUS_ARMING.md, docker-compose
- Update all ROS2 package comments, config labels, launch args
(stm32_port→esp32_port, /dev/stm32-bridge→/dev/esp32-bridge)
- Update WebUI: stm32Mode→esp32Mode, stm32Version→esp32Version,
"STM32 State/Mode" labels → "ESP32 State/Mode" (ControlMode, SettingsPanel)
- Add TODO(esp32-migration) markers on stm32_protocol.py and mamba_protocol.py
binary frame layouts — pending ESP32 protocol spec from max
- Fix roslib CDN 1.3.0→1.4.0 in all 11 HTML panels (fixes ROS2 Humble
rosbridge "Received a message without an op" incompatibility)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:25:24 -04:00 |
|
|
|
7c4e46aaa1
|
feat: STM32-to-Jetson ROS2 serial bridge node
saltybot_bridge ROS2 Python package (ament_python):
- serial_bridge_node.py: reads USB CDC JSON telemetry from STM32F722 at 50Hz
Parses exact firmware format: {"p","r","e","ig","m","s","y"} (all ×10 ints)
State enum: 0=DISARMED, 1=ARMED, 2=TILT_FAULT (matched to balance_state_t)
- Publishes sensor_msgs/Imu on /saltybot/imu (pitch/roll/yaw as angular_velocity)
- Publishes std_msgs/String on /saltybot/balance_state (full PID JSON diagnostics)
- Publishes diagnostic_msgs/DiagnosticArray on /diagnostics (OK/WARN/ERROR by state)
- Auto-reconnects on serial disconnect; IMU fault frames → ERROR diagnostic
- launch/bridge.launch.py with serial_port + baud_rate launch args
- config/bridge_params.yaml (921600 baud, /dev/ttyACM0)
- test/test_parse.py: 8 unit tests covering normal, fault, edge cases (all pass)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 17:11:02 -05:00 |
|
