|
|
f71dad5344
|
feat(arch): migrate all STM32/Mamba/BlackPill refs to ESP32 BALANCE/IO + fix roslib@1.4.0
Architecture change (2026-04-03): Mamba F722S (STM32F722) and BlackPill
replaced by ESP32 BALANCE (PID loop) and ESP32 IO (motors/sensors/comms).
- Update CLAUDE.md, docs, chassis BOM/ASSEMBLY, pinout, power-budget,
wiring-diagram, TEAM.md, AUTONOMOUS_ARMING.md, docker-compose
- Update all ROS2 package comments, config labels, launch args
(stm32_port→esp32_port, /dev/stm32-bridge→/dev/esp32-bridge)
- Update WebUI: stm32Mode→esp32Mode, stm32Version→esp32Version,
"STM32 State/Mode" labels → "ESP32 State/Mode" (ControlMode, SettingsPanel)
- Add TODO(esp32-migration) markers on stm32_protocol.py and mamba_protocol.py
binary frame layouts — pending ESP32 protocol spec from max
- Fix roslib CDN 1.3.0→1.4.0 in all 11 HTML panels (fixes ROS2 Humble
rosbridge "Received a message without an op" incompatibility)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:25:24 -04:00 |
|
|
|
cd9299ded8
|
feat: parametric chassis frame design (bd-1iy5)
OpenSCAD parametric model for SaltyBot two-wheeled self-balancing robot chassis:
- 600mm wheelbase, 170mm hoverboard hub motor fork dropouts
- MAMBA F722S FC mount (30.5x30.5mm M3 pattern, 6mm nylon standoffs)
- Battery tray for 24V 4Ah pack (185x72x52mm) with strap slots + vent holes
- Jetson Nano B01 mount plate (58x58mm M3 pattern, 8mm standoffs)
- Front/rear bumper brackets with 22mm EMT conduit saddle clamps
- Longitudinal ribs, lightening holes, cable routing slots
- BOM (32 line items) and step-by-step assembly notes
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 12:45:40 -05:00 |
|
