|
|
fa75c442a7
|
feat: remove all STM32/Mamba/BlackPill references — ESP32-S3 only
Archive STM32 firmware to legacy/stm32/:
- src/, include/, lib/USB_CDC/, platformio.ini, test stubs, flash_firmware.py
- test/test_battery_adc.c, test_hw_button.c, test_pid_schedule.c, test_vesc_can.c, test_can_watchdog.c
- USB_CDC_BUG.md
Rename: stm32_protocol → esp32_protocol, mamba_protocol → balance_protocol,
stm32_cmd_node → esp32_cmd_node, stm32_cmd_params → esp32_cmd_params,
stm32_cmd.launch.py → esp32_cmd.launch.py,
test_stm32_protocol → test_esp32_protocol, test_stm32_cmd_node → test_esp32_cmd_node
Content cleanup across all files:
- Mamba F722S → ESP32-S3 BALANCE
- BlackPill → ESP32-S3 IO
- STM32F722/F7xx → ESP32-S3
- stm32Mode/Version/Port → esp32Mode/Version/Port
- STM32 State/Mode labels → ESP32 State/Mode
- Jetson Nano → Jetson Orin Nano Super
- /dev/stm32 → /dev/esp32
- stm32_bridge → esp32_bridge
- STM32 HAL → ESP-IDF
docs/SALTYLAB.md:
- Update "Drone FC Details" to describe ESP32-S3 BALANCE board (Waveshare ESP32-S3 Touch LCD 1.28)
- Replace verbose "Self-Balancing Control" STM32 section with brief note pointing to SAUL-TEE-SYSTEM-REFERENCE.md
TEAM.md: Update Embedded Firmware Engineer role to ESP32-S3 / ESP-IDF
No new functionality — cleanup only.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 09:00:38 -04:00 |
|
|
|
c5d6a72d39
|
feat: update SLAM stack for Jetson Orin Nano Super (67 TOPS, JetPack 6)
Platform upgrade: Jetson Nano 4GB → Orin Nano Super 8GB (March 1, 2026)
All Nano-era constraints removed — power/rate/resolution limits obsolete.
Dockerfile: l4t-jetpack:r36.2.0 (JetPack 6 / Ubuntu 22.04 / CUDA 12.x),
ROS2 Humble via native apt, added ros-humble-rtabmap-ros,
ros-humble-v4l2-camera for future IMX219 CSI (Phase 2c)
New: slam_rtabmap.launch.py — Orin primary SLAM entry point
RTAB-Map with subscribe_scan (RPLIDAR) + subscribe_rgbd (D435i)
Replaces slam_toolbox as docker-compose default
New: config/rtabmap_params.yaml — Orin-optimized
DetectionRate 10Hz, MaxFeatures 1000, Grid/3D true,
TimeThr 0 (no limit), Mem/STMSize 0 (unlimited)
Updated: config/realsense_d435i.yaml — 848x480x30, pointcloud enabled
Updated: config/slam_toolbox_params.yaml — 10Hz rate, 1s map interval
Updated: SLAM-SETUP-PLAN.md — full rewrite for Orin: arch diagram,
Phase 2c IMX219 plan (4x 160° CSI surround), 25W power budget
docker-compose.yml: image tag jetson-orin, default → slam_rtabmap.launch.py
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 21:46:27 -05:00 |
|
|
|
c47ac41573
|
feat: Jetson Nano platform setup and Docker env (bd-1hcg)
- Dockerfile: L4T R32.6.1 (JetPack 4.6) base + ROS2 Humble + SLAM stack
(slam_toolbox, Nav2, rplidar_ros, realsense2_camera, robot_localization)
- docker-compose.yml: multi-service stack (ROS2, RPLIDAR A1M8, D435i, STM32 bridge)
with device passthrough, host networking for DDS, persistent map volume
- docs/pinout.md: full GPIO/I2C/UART pinout for STM32F722 bridge (USB CDC +
UART fallback), RealSense D435i (USB3), RPLIDAR A1M8, udev rules
- docs/power-budget.md: 10W envelope analysis with per-component breakdown,
mitigation strategies (RPLIDAR gating, D435i 640p, nvpmodel modes)
- scripts/setup-jetson.sh: host one-shot setup (Docker, nvidia-container-runtime,
udev rules, MAXN power mode, swap)
- scripts/build-and-run.sh: build/up/down/shell/slam/status helper
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 12:46:14 -05:00 |
|
