|
|
cea3eaff97
|
cleanup: Remove all Mamba/STM32/BlackPill references — ESP32-S3 only
- Renamed mamba_protocol.py → balance_protocol.py; updated all importers
- can_bridge_node.py rewritten to use balance_protocol.py API (ESP32-S3 BALANCE)
- test_can_bridge.py rewritten to test actual balance_protocol.py constants/functions
- All STM32/Mamba references in Python, YAML, Markdown, shell scripts replaced:
* Hardware: MAMBA F722S → ESP32-S3 BALANCE/IO
* Device paths: /dev/stm32-bridge → /dev/esp32-io
* Node names: stm32_serial_bridge → esp32_io_serial_bridge
* hardware_id: stm32f722 → esp32s3-balance/esp32s3-io
- C/C++ src/include/lib/test files: added DEPRECATED header comment
- Covers: saltybot_bridge, saltybot_can_bridge, saltybot_can_e2e_test,
saltybot_bringup, saltybot_diagnostics, saltybot_mode_switch, and all
chassis, docs, scripts, and project files
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:56:09 -04:00 |
|
|
|
c47ac41573
|
feat: Jetson Nano platform setup and Docker env (bd-1hcg)
- Dockerfile: L4T R32.6.1 (JetPack 4.6) base + ROS2 Humble + SLAM stack
(slam_toolbox, Nav2, rplidar_ros, realsense2_camera, robot_localization)
- docker-compose.yml: multi-service stack (ROS2, RPLIDAR A1M8, D435i, STM32 bridge)
with device passthrough, host networking for DDS, persistent map volume
- docs/pinout.md: full GPIO/I2C/UART pinout for STM32F722 bridge (USB CDC +
UART fallback), RealSense D435i (USB3), RPLIDAR A1M8, udev rules
- docs/power-budget.md: 10W envelope analysis with per-component breakdown,
mitigation strategies (RPLIDAR gating, D435i 640p, nvpmodel modes)
- scripts/setup-jetson.sh: host one-shot setup (Docker, nvidia-container-runtime,
udev rules, MAXN power mode, swap)
- scripts/build-and-run.sh: build/up/down/shell/slam/status helper
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-02-28 12:46:14 -05:00 |
|
