|
|
5ef1f7e365
|
docs: full SAUL-TEE ESP32-S3 spec — pins, CAN, UART, RC mapping
Complete hardware reference from hal@Orin spec (2026-04-04):
- docs/SAUL-TEE-SYSTEM-REFERENCE.md: authoritative pin/protocol/CAN reference
ESP32-S3 BALANCE: QMI8658 SPI(IO38-42), GC9A01 LCD, SN65HVD230 CAN(IO43/44),
inter-board UART(IO17/18)
ESP32-S3 IO: Crossfire UART0(IO43/44), ELRS UART2(IO16/17), BTS7960(IO1-8),
I2C(IO11/12), WS2812(IO13), buzzer/headlight/fan, arming btn, kill-sw, UART(IO18/21)
- Inter-board binary protocol: [0xAA][LEN][TYPE][PAYLOAD][CRC8] @ 460800 baud
- CAN: VESC L=68, R=56; Orin cmds 0x300-0x303; telemetry 0x400-0x401 @ 10Hz
- RC: CH5=ARM, CH6=ESTOP, CH7=speed-limit; CRSF loss >100ms = motors cut
- CLAUDE.md, TEAM.md, docs/AGENTS.md, docs/SALTYLAB.md updated with full spec
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:25:24 -04:00 |
|
|
|
f71dad5344
|
feat(arch): migrate all STM32/Mamba/BlackPill refs to ESP32 BALANCE/IO + fix roslib@1.4.0
Architecture change (2026-04-03): Mamba F722S (STM32F722) and BlackPill
replaced by ESP32 BALANCE (PID loop) and ESP32 IO (motors/sensors/comms).
- Update CLAUDE.md, docs, chassis BOM/ASSEMBLY, pinout, power-budget,
wiring-diagram, TEAM.md, AUTONOMOUS_ARMING.md, docker-compose
- Update all ROS2 package comments, config labels, launch args
(stm32_port→esp32_port, /dev/stm32-bridge→/dev/esp32-bridge)
- Update WebUI: stm32Mode→esp32Mode, stm32Version→esp32Version,
"STM32 State/Mode" labels → "ESP32 State/Mode" (ControlMode, SettingsPanel)
- Add TODO(esp32-migration) markers on stm32_protocol.py and mamba_protocol.py
binary frame layouts — pending ESP32 protocol spec from max
- Fix roslib CDN 1.3.0→1.4.0 in all 11 HTML panels (fixes ROS2 Humble
rosbridge "Received a message without an op" incompatibility)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:25:24 -04:00 |
|
|
|
30b0f245e1
|
docs: retire Mamba F722S/BlackPill, adopt ESP32 BALANCE + ESP32 IO architecture
Effective 2026-04-03: STM32F722 flight controller no longer used.
New architecture:
- ESP32 BALANCE: PID balance loop
- ESP32 IO: motors, sensors, comms
Updated: CLAUDE.md, TEAM.md, docs/AGENTS.md, docs/SALTYLAB.md
Legacy src/ STM32 firmware is archived — not extended.
Source code migration pending ESP32 hardware spec from max.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:25:24 -04:00 |
|
