|
|
cea3eaff97
|
cleanup: Remove all Mamba/STM32/BlackPill references — ESP32-S3 only
- Renamed mamba_protocol.py → balance_protocol.py; updated all importers
- can_bridge_node.py rewritten to use balance_protocol.py API (ESP32-S3 BALANCE)
- test_can_bridge.py rewritten to test actual balance_protocol.py constants/functions
- All STM32/Mamba references in Python, YAML, Markdown, shell scripts replaced:
* Hardware: MAMBA F722S → ESP32-S3 BALANCE/IO
* Device paths: /dev/stm32-bridge → /dev/esp32-io
* Node names: stm32_serial_bridge → esp32_io_serial_bridge
* hardware_id: stm32f722 → esp32s3-balance/esp32s3-io
- C/C++ src/include/lib/test files: added DEPRECATED header comment
- Covers: saltybot_bridge, saltybot_can_bridge, saltybot_can_e2e_test,
saltybot_bringup, saltybot_diagnostics, saltybot_mode_switch, and all
chassis, docs, scripts, and project files
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
2026-04-04 08:56:09 -04:00 |
|
Salty Bead
|
3bb4b71cea
|
feat: motor bench test working — UART5 ESC + USART6 Jetson + W command
- Fix UART5 ESC: PC12=TX, PD2=RX @ 115200 baud (was USART2/38400)
- Add jetson_uart.c: USART6 command interface (A/D/E/Z/H/C/W/R/X/? commands)
- Add W command: persistent direct motor test (sets globals, main loop sends at 50Hz)
- Fix power_mgmt: keep UART5 clock active, PC7 EXTI wake source
- Fix main loop: direct_test_speed/steer override disarmed zero-send
- Add boot banner on USART6
Tested: Orin -> FC USART6 -> FC UART5 -> EFeru ESC -> both motors spin
|
2026-03-06 22:35:24 -05:00 |
|
