Adds motor_driver.c/h between the balance PID and the raw
hoverboard UART driver:
- Differential drive: balance_cmd → speed, steer_cmd → steer
- Steer-only ramping at MOTOR_STEER_RAMP_RATE (balance PID keeps
full immediate authority — no ramp on speed channel)
- Headroom clamp: reduces steer so |speed|+|steer|<=MOTOR_CMD_MAX
ensuring ESC never clips the balance command
- Emergency stop: latches on TILT_FAULT, clears on BALANCE_DISARMED;
send path stays in 50Hz ESC tick to avoid flooding UART
main.c: replace bare hoverboard_send() with motor_driver_update();
config.h: MOTOR_CMD_MAX=1000, MOTOR_STEER_RAMP_RATE=20 counts/ms
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
