seb/saltylab-firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
777 Commits 391 Branches 0 Tags
Commit Graph

6 Commits

Author SHA1 Message Date
sl-mechanical
a2c554c232 cleanup: remove all Mamba/F722S/STM32F722 refs — replace with ESP32-S3 BALANCE/IO 
- docs/: rewrite AGENTS.md, wiring-diagram.md (SAUL-TEE arch); update
  SALTYLAB.md, FACE_LCD_ANIMATION.md, board-viz.html, SALTYLAB-DETAILED refs
- cad/: dimensions.scad FC params → ESP32-S3 BALANCE params
- chassis/: ASSEMBLY.md, BOM.md, ip54_BOM.md, *.scad — FC_MOUNT_SPACING/
  FC_PITCH → TBD ESP32-S3; Drone FC → MCU mount throughout
- CLAUDE.md, TEAM.md: project desc → SAUL-TEE; hardware table → ESP32-S3/VESC
- USB_CDC_BUG.md: marked ARCHIVED (legacy STM32 era)
- AUTONOMOUS_ARMING.md: USB CDC → inter-board UART (ESP32-S3 BALANCE)
- projects/saltybot/SLAM-SETUP-PLAN.md: FC/STM32F722 → BALANCE/CAN
- jetson/docs/pinout.md, power-budget.md, README.md: STM32 bridge → CAN bridge
- jetson/config/RECOVERY_BEHAVIORS.md: FC+Hoverboard → BALANCE+VESC
- jetson/ros2_ws: stm32_protocol.py → esp32_protocol.py,
  stm32_cmd_node.py → esp32_cmd_node.py,
  mamba_protocol.py → balance_protocol.py; can_bridge_node imports updated
- scripts/flash_firmware.py: DFU/STM32 → pio run -t upload
- src/ include/: ARCHIVED headers added (legacy code preserved)
- test/: ARCHIVED notices; STM32F722 comments marked LEGACY
- ui/diagnostics_panel.html: Board/STM32 → ESP32-S3

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-04-04 09:06:09 -04:00
sl-firmware
fa75c442a7 feat: remove all STM32/Mamba/BlackPill references — ESP32-S3 only 
Archive STM32 firmware to legacy/stm32/:
- src/, include/, lib/USB_CDC/, platformio.ini, test stubs, flash_firmware.py
- test/test_battery_adc.c, test_hw_button.c, test_pid_schedule.c, test_vesc_can.c, test_can_watchdog.c
- USB_CDC_BUG.md

Rename: stm32_protocol → esp32_protocol, mamba_protocol → balance_protocol,
  stm32_cmd_node → esp32_cmd_node, stm32_cmd_params → esp32_cmd_params,
  stm32_cmd.launch.py → esp32_cmd.launch.py,
  test_stm32_protocol → test_esp32_protocol, test_stm32_cmd_node → test_esp32_cmd_node

Content cleanup across all files:
- Mamba F722S → ESP32-S3 BALANCE
- BlackPill → ESP32-S3 IO
- STM32F722/F7xx → ESP32-S3
- stm32Mode/Version/Port → esp32Mode/Version/Port
- STM32 State/Mode labels → ESP32 State/Mode
- Jetson Nano → Jetson Orin Nano Super
- /dev/stm32 → /dev/esp32
- stm32_bridge → esp32_bridge
- STM32 HAL → ESP-IDF

docs/SALTYLAB.md:
- Update "Drone FC Details" to describe ESP32-S3 BALANCE board (Waveshare ESP32-S3 Touch LCD 1.28)
- Replace verbose "Self-Balancing Control" STM32 section with brief note pointing to SAUL-TEE-SYSTEM-REFERENCE.md

TEAM.md: Update Embedded Firmware Engineer role to ESP32-S3 / ESP-IDF

No new functionality — cleanup only.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-04-04 09:00:38 -04:00
sl-firmware
5ef1f7e365 docs: full SAUL-TEE ESP32-S3 spec — pins, CAN, UART, RC mapping 
Complete hardware reference from hal@Orin spec (2026-04-04):
- docs/SAUL-TEE-SYSTEM-REFERENCE.md: authoritative pin/protocol/CAN reference
  ESP32-S3 BALANCE: QMI8658 SPI(IO38-42), GC9A01 LCD, SN65HVD230 CAN(IO43/44),
  inter-board UART(IO17/18)
  ESP32-S3 IO: Crossfire UART0(IO43/44), ELRS UART2(IO16/17), BTS7960(IO1-8),
  I2C(IO11/12), WS2812(IO13), buzzer/headlight/fan, arming btn, kill-sw, UART(IO18/21)
- Inter-board binary protocol: [0xAA][LEN][TYPE][PAYLOAD][CRC8] @ 460800 baud
- CAN: VESC L=68, R=56; Orin cmds 0x300-0x303; telemetry 0x400-0x401 @ 10Hz
- RC: CH5=ARM, CH6=ESTOP, CH7=speed-limit; CRSF loss >100ms = motors cut
- CLAUDE.md, TEAM.md, docs/AGENTS.md, docs/SALTYLAB.md updated with full spec

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-04-04 08:25:24 -04:00
sl-webui
f71dad5344 feat(arch): migrate all STM32/Mamba/BlackPill refs to ESP32 BALANCE/IO + fix roslib@1.4.0 
Architecture change (2026-04-03): Mamba F722S (STM32F722) and BlackPill
replaced by ESP32 BALANCE (PID loop) and ESP32 IO (motors/sensors/comms).

- Update CLAUDE.md, docs, chassis BOM/ASSEMBLY, pinout, power-budget,
  wiring-diagram, TEAM.md, AUTONOMOUS_ARMING.md, docker-compose
- Update all ROS2 package comments, config labels, launch args
  (stm32_port→esp32_port, /dev/stm32-bridge→/dev/esp32-bridge)
- Update WebUI: stm32Mode→esp32Mode, stm32Version→esp32Version,
  "STM32 State/Mode" labels → "ESP32 State/Mode" (ControlMode, SettingsPanel)
- Add TODO(esp32-migration) markers on stm32_protocol.py and mamba_protocol.py
  binary frame layouts — pending ESP32 protocol spec from max
- Fix roslib CDN 1.3.0→1.4.0 in all 11 HTML panels (fixes ROS2 Humble
  rosbridge "Received a message without an op" incompatibility)

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-04-04 08:25:24 -04:00
sl-firmware
30b0f245e1 docs: retire Mamba F722S/BlackPill, adopt ESP32 BALANCE + ESP32 IO architecture 
Effective 2026-04-03: STM32F722 flight controller no longer used.
New architecture:
- ESP32 BALANCE: PID balance loop
- ESP32 IO: motors, sensors, comms

Updated: CLAUDE.md, TEAM.md, docs/AGENTS.md, docs/SALTYLAB.md
Legacy src/ STM32 firmware is archived — not extended.
Source code migration pending ESP32 hardware spec from max.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
 2026-04-04 08:25:24 -04:00
Sebastien Vayrette
0afdaea2e1 Add USB CDC bug doc and team requirements 2026-02-28 11:59:53 -05:00