sl-controls
f4e71777ec
Fixed 7 compile errors across 6 files: 1. servo.c: Removed duplicate ServoState typedef, updated struct definition in header 2. watchdog.c: Fixed IWDG handle usage - moved to global scope for IRQHandler access 3. ultrasonic.c: Fixed timer handle type mismatches - use TIM_HandleTypeDef instead of TIM_TypeDef, replaced HAL_TIM_IC_Init_Compat with proper HAL functions 4. main.c: Replaced undefined functions - imu_calibrated() → mpu6000_is_calibrated(), crsf_is_active() → manual state check 5. ina219.c: Stubbed I2C functions pending HAL implementation Build now passes with ZERO errors. - RAM: 6.5% (16964 bytes / 262144) - Flash: 10.6% (55368 bytes / 524288) Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
115 lines
3.0 KiB
C
115 lines
3.0 KiB
C
#ifndef SERVO_H
|
|
#define SERVO_H
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
/*
|
|
* servo.h — Pan-tilt servo driver for camera head (Issue #206)
|
|
*
|
|
* Hardware: TIM4 PWM at 50 Hz (20 ms period)
|
|
* - CH1 (PB6): Pan servo (0-180°)
|
|
* - CH2 (PB7): Tilt servo (0-180°)
|
|
*
|
|
* Servo pulse mapping:
|
|
* - 500 µs → 0° (full left/down)
|
|
* - 1500 µs → 90° (center)
|
|
* - 2500 µs → 180° (full right/up)
|
|
*
|
|
* Smooth sweeping via servo_sweep() for camera motion.
|
|
*/
|
|
|
|
/* Servo channels */
|
|
typedef enum {
|
|
SERVO_PAN = 0, /* CH1 (PB6) */
|
|
SERVO_TILT = 1, /* CH2 (PB7) */
|
|
SERVO_COUNT
|
|
} ServoChannel;
|
|
|
|
/* Servo state */
|
|
typedef struct {
|
|
uint16_t current_angle_deg[SERVO_COUNT]; /* Current angle in degrees (0-180) */
|
|
uint16_t target_angle_deg[SERVO_COUNT]; /* Target angle in degrees */
|
|
uint16_t pulse_us[SERVO_COUNT]; /* Pulse width in microseconds (500-2500) */
|
|
|
|
/* Sweep state (per-servo) */
|
|
uint32_t sweep_start_ms[SERVO_COUNT];
|
|
uint32_t sweep_duration_ms[SERVO_COUNT];
|
|
uint16_t sweep_start_deg[SERVO_COUNT];
|
|
uint16_t sweep_end_deg[SERVO_COUNT];
|
|
bool is_sweeping[SERVO_COUNT];
|
|
} ServoState;
|
|
|
|
/*
|
|
* servo_init()
|
|
*
|
|
* Initialize TIM4 PWM on PB6 (CH1, pan) and PB7 (CH2, tilt) at 50 Hz.
|
|
* Centers both servos at 90° (1500 µs). Call once at startup.
|
|
*/
|
|
void servo_init(void);
|
|
|
|
/*
|
|
* servo_set_angle(channel, degrees)
|
|
*
|
|
* Set target angle for a servo (0-180°).
|
|
* Immediately updates PWM without motion ramping.
|
|
* Valid channels: SERVO_PAN, SERVO_TILT
|
|
*
|
|
* Examples:
|
|
* servo_set_angle(SERVO_PAN, 0); // Pan left
|
|
* servo_set_angle(SERVO_PAN, 90); // Pan center
|
|
* servo_set_angle(SERVO_TILT, 180); // Tilt up
|
|
*/
|
|
void servo_set_angle(ServoChannel channel, uint16_t degrees);
|
|
|
|
/*
|
|
* servo_get_angle(channel)
|
|
*
|
|
* Return current servo angle in degrees (0-180).
|
|
*/
|
|
uint16_t servo_get_angle(ServoChannel channel);
|
|
|
|
/*
|
|
* servo_set_pulse_us(channel, pulse_us)
|
|
*
|
|
* Set servo pulse width directly in microseconds (500-2500).
|
|
* Used for fine-tuning or direct control.
|
|
*/
|
|
void servo_set_pulse_us(ServoChannel channel, uint16_t pulse_us);
|
|
|
|
/*
|
|
* servo_sweep(channel, start_deg, end_deg, duration_ms)
|
|
*
|
|
* Smooth linear sweep from start to end angle over duration_ms.
|
|
* Non-blocking: must call servo_tick() every ~10 ms to update PWM.
|
|
*
|
|
* Examples:
|
|
* servo_sweep(SERVO_PAN, 0, 180, 2000); // Pan left-to-right in 2 seconds
|
|
* servo_sweep(SERVO_TILT, 45, 135, 1000); // Tilt up-down in 1 second
|
|
*/
|
|
void servo_sweep(ServoChannel channel, uint16_t start_deg, uint16_t end_deg, uint32_t duration_ms);
|
|
|
|
/*
|
|
* servo_tick(now_ms)
|
|
*
|
|
* Update servo sweep animation (if active). Call every ~10 ms from main loop.
|
|
* No-op if not currently sweeping.
|
|
*/
|
|
void servo_tick(uint32_t now_ms);
|
|
|
|
/*
|
|
* servo_is_sweeping()
|
|
*
|
|
* Returns true if any servo is currently sweeping.
|
|
*/
|
|
bool servo_is_sweeping(void);
|
|
|
|
/*
|
|
* servo_stop_sweep(channel)
|
|
*
|
|
* Stop sweep immediately, hold current position.
|
|
*/
|
|
void servo_stop_sweep(ServoChannel channel);
|
|
|
|
#endif /* SERVO_H */
|