sl-firmware
fa75c442a7
Archive STM32 firmware to legacy/stm32/: - src/, include/, lib/USB_CDC/, platformio.ini, test stubs, flash_firmware.py - test/test_battery_adc.c, test_hw_button.c, test_pid_schedule.c, test_vesc_can.c, test_can_watchdog.c - USB_CDC_BUG.md Rename: stm32_protocol → esp32_protocol, mamba_protocol → balance_protocol, stm32_cmd_node → esp32_cmd_node, stm32_cmd_params → esp32_cmd_params, stm32_cmd.launch.py → esp32_cmd.launch.py, test_stm32_protocol → test_esp32_protocol, test_stm32_cmd_node → test_esp32_cmd_node Content cleanup across all files: - Mamba F722S → ESP32-S3 BALANCE - BlackPill → ESP32-S3 IO - STM32F722/F7xx → ESP32-S3 - stm32Mode/Version/Port → esp32Mode/Version/Port - STM32 State/Mode labels → ESP32 State/Mode - Jetson Nano → Jetson Orin Nano Super - /dev/stm32 → /dev/esp32 - stm32_bridge → esp32_bridge - STM32 HAL → ESP-IDF docs/SALTYLAB.md: - Update "Drone FC Details" to describe ESP32-S3 BALANCE board (Waveshare ESP32-S3 Touch LCD 1.28) - Replace verbose "Self-Balancing Control" STM32 section with brief note pointing to SAUL-TEE-SYSTEM-REFERENCE.md TEAM.md: Update Embedded Firmware Engineer role to ESP32-S3 / ESP-IDF No new functionality — cleanup only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
102 lines
3.2 KiB
C
102 lines
3.2 KiB
C
#ifndef ULTRASONIC_H
|
|
#define ULTRASONIC_H
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
/*
|
|
* ultrasonic.h — HC-SR04 ultrasonic distance sensor driver (Issue #243)
|
|
*
|
|
* STM32F722 driver for HC-SR04 ultrasonic ranger with TIM1 input capture.
|
|
* Trigger: PA0 (GPIO output, active high pulse 10µs)
|
|
* Echo: PA1 (TIM1_CH2, input capture on rising/falling edges)
|
|
*
|
|
* Non-blocking operation: trigger measurement, get result via callback.
|
|
* Distance calculated from echo pulse width: distance_mm = (pulse_us / 2) / 29.1
|
|
* Typical range: 20-4000mm (accuracy ±3mm above 30mm)
|
|
*/
|
|
|
|
/* Ultrasonic sensor states */
|
|
typedef enum {
|
|
ULTRASONIC_IDLE, /* Ready for new measurement */
|
|
ULTRASONIC_TRIGGERED, /* Trigger pulse sent, waiting for echo */
|
|
ULTRASONIC_MEASURING, /* Echo rising edge detected, measuring */
|
|
ULTRASONIC_COMPLETE, /* Measurement complete */
|
|
ULTRASONIC_ERROR /* Timeout or out-of-range */
|
|
} UltrasonicState;
|
|
|
|
/* Measurement result callback: called when measurement completes
|
|
* Arguments:
|
|
* - distance_mm: measured distance in mm (0 if error/timeout)
|
|
* - is_valid: true if measurement valid, false if timeout/error
|
|
*/
|
|
typedef void (*ultrasonic_callback_t)(uint16_t distance_mm, bool is_valid);
|
|
|
|
/*
|
|
* ultrasonic_init()
|
|
*
|
|
* Initialize HC-SR04 driver:
|
|
* - PA0 as GPIO output (trigger pin)
|
|
* - PA1 as TIM1_CH2 input capture (echo pin)
|
|
* - Configure TIM1 for input capture on both edges (rising/falling)
|
|
* - Enable timer interrupt for echo measurement
|
|
*/
|
|
void ultrasonic_init(void);
|
|
|
|
/*
|
|
* ultrasonic_trigger()
|
|
*
|
|
* Start a non-blocking distance measurement.
|
|
* Sends 10µs trigger pulse on PA0, sets up echo measurement.
|
|
* Measurement completes asynchronously (typically 25-300ms depending on distance).
|
|
* Call ultrasonic_get_state() to check status or wait for callback.
|
|
*
|
|
* Returns: true if triggered successfully, false if still measuring previous result
|
|
*/
|
|
bool ultrasonic_trigger(void);
|
|
|
|
/*
|
|
* ultrasonic_set_callback(callback)
|
|
*
|
|
* Register callback to be called when measurement completes.
|
|
* Callback receives: distance_mm (0 if error), is_valid (true if successful)
|
|
* Callback is optional; can poll with ultrasonic_get_result() instead.
|
|
*/
|
|
void ultrasonic_set_callback(ultrasonic_callback_t callback);
|
|
|
|
/*
|
|
* ultrasonic_get_state()
|
|
*
|
|
* Returns current measurement state (IDLE, TRIGGERED, MEASURING, COMPLETE, ERROR).
|
|
* Useful for non-blocking polling.
|
|
*/
|
|
UltrasonicState ultrasonic_get_state(void);
|
|
|
|
/*
|
|
* ultrasonic_get_result(distance_mm, is_valid)
|
|
*
|
|
* Retrieve result of last measurement (only valid when state == ULTRASONIC_COMPLETE).
|
|
* Resets state to IDLE after reading.
|
|
*
|
|
* Arguments:
|
|
* - distance_mm: pointer to store distance in mm
|
|
* - is_valid: pointer to store validity flag
|
|
*
|
|
* Returns: true if result retrieved, false if no measurement available
|
|
*/
|
|
bool ultrasonic_get_result(uint16_t *distance_mm, bool *is_valid);
|
|
|
|
/*
|
|
* ultrasonic_tick(now_ms)
|
|
*
|
|
* Update function called periodically (recommended: every 1-10ms in main loop).
|
|
* Handles timeout detection for echo measurement.
|
|
* Must be called regularly for non-blocking operation.
|
|
*
|
|
* Arguments:
|
|
* - now_ms: current time in milliseconds (from HAL_GetTick() or similar)
|
|
*/
|
|
void ultrasonic_tick(uint32_t now_ms);
|
|
|
|
#endif /* ULTRASONIC_H */
|