On boot, before the main loop, sample 1000 gyro readings (~1s) while
board is held still. Compute per-axis mean offset (sensor-frame raw LSBs)
and subtract from all subsequent readings in mpu6000_read().
- mpu6000_calibrate(): LED1+LED2 solid ON during 1s sample window,
resets filter state to zero once bias is known
- mpu6000_is_calibrated(): gate; main loop blocks arming and USB
streaming until calibration completes
- Bias subtracted in sensor frame before CW270 axis transform + scale,
so all three axes (pitch/roll/yaw rate) benefit
- config.h: GYRO_CAL_SAMPLES=1000
- No flash storage — recalibrate fresh each boot (bias varies with temp)
Closes#21 (3.5°/s yaw drift), #23 (gyro bias calibration on boot).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
sl-controls
1c95243e52