02217443ea
Consolidating seb/saltylab into saltylab-firmware before deleting the seed repo. - 16 OpenSCAD CAD models → cad/ - Design docs (SALTYLAB.md, PLATFORM.md, AGENTS.md, board-viz.html) → docs/
57 lines
1.8 KiB
OpenSCAD
57 lines
1.8 KiB
OpenSCAD
// ============================================
|
||
// SaltyLab — Kill Switch Mount
|
||
// 60×60×40mm PETG
|
||
// 22mm panel-mount emergency stop button
|
||
// Mounts to 2020 extrusion, easily reachable
|
||
// ============================================
|
||
include <dimensions.scad>
|
||
|
||
mount_w = 60;
|
||
mount_d = 60;
|
||
mount_h = 40;
|
||
panel_h = 3; // Panel face thickness
|
||
|
||
module kill_switch_mount() {
|
||
difference() {
|
||
union() {
|
||
// Main body (angled face for visibility)
|
||
hull() {
|
||
translate([-mount_w/2, 0, 0])
|
||
cube([mount_w, mount_d, 1]);
|
||
translate([-mount_w/2, 5, mount_h])
|
||
cube([mount_w, mount_d - 5, 1]);
|
||
}
|
||
|
||
// 2020 extrusion mount bracket (back)
|
||
translate([-15, mount_d, 0])
|
||
cube([30, 10, 20]);
|
||
}
|
||
|
||
// Kill switch hole (22mm, through angled face)
|
||
translate([0, mount_d/2, mount_h/2])
|
||
rotate([10, 0, 0]) // Slight angle for ergonomics
|
||
cylinder(d=kill_sw_dia + tol, h=panel_h + 2, center=true, $fn=50);
|
||
|
||
// Interior cavity (hollow for switch body)
|
||
translate([-kill_sw_dia/2 - 3, 5, 3])
|
||
cube([kill_sw_dia + 6, mount_d - 10, mount_h - 3]);
|
||
|
||
// Wire exit hole (bottom)
|
||
translate([0, mount_d/2, -1])
|
||
cylinder(d=10, h=5, $fn=25);
|
||
|
||
// Extrusion bolt holes (M5, through back bracket)
|
||
for (z = [7, 15]) {
|
||
translate([-20, mount_d + 5, z])
|
||
rotate([90, 0, 0])
|
||
cylinder(d=m5_clear, h=15, center=true, $fn=25);
|
||
}
|
||
|
||
// Label recess ("EMERGENCY STOP" — flat area for sticker)
|
||
translate([-25, 5, mount_h - 1])
|
||
cube([50, 15, 1.5]);
|
||
}
|
||
}
|
||
|
||
kill_switch_mount();
|