|
|
baa3ef7690
|
3-board relay firmware: sink + I2S + dual source
Implements the only architecture that can relay iPhone audio to two BT
speakers at once (one ESP32 cannot be A2DP sink+source, and a source holds
only one link):
iPhone ))BT)) [Board A: A2DP sink -> I2S master]
==I2S bus==> [Board B: I2S slave -> A2DP source] ))BT)) JBL
==I2S bus==> [Board C: I2S slave -> A2DP source] ))BT)) Cardo
- src/board_sink.cpp : A2DP sink "BikeAudio", forwards decoded PCM to an
I2S master bus (BCK=5, WS=25, DATA=23); follows negotiated sample rate.
- src/board_source.cpp : I2S slave (BCK=19, WS=18, DATA=22) -> A2DP source,
target speaker via TARGET_SPEAKER build flag; pads silence on underrun.
- platformio.ini : 3 envs (sink, source_jbl, source_cardo) sharing an
[env] base; sources differ only by TARGET_SPEAKER. build_src_filter selects
the per-board source file. Libs pinned as before.
- README_RELAY.md : wiring table, I2S bus topology, flash order, pairing,
and the speaker-sync limitation.
Replaces the single-board src/main.cpp (architecturally impossible). All
three envs build clean. Hardware flash + wiring next.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
2026-06-10 11:35:12 -04:00 |
|
|
|
04e7f20430
|
Convert Arduino sketch to PlatformIO project
Restructure BikeAudio for PlatformIO while preserving the original
build specs from the .ino header:
- platform espressif32 @ ~6.6.0 -> ESP32 Arduino core 2.0.17
- board esp32dev (ESP32 DevKitC v4)
- board_build.partitions = huge_app.csv (Huge APP, required for BT stack)
- monitor_speed = 115200
Changes:
- BikeAudio.ino -> src/main.cpp (+ #include <Arduino.h>, print_status()
forward declaration; PlatformIO compiles .cpp directly and does not
auto-generate prototypes like the Arduino IDE).
- Add platformio.ini with pschatzmann ESP32-A2DP + arduino-audio-tools
pinned to exact commits (ESP32-A2DP 1.8.11, audio-tools 1.2.4) for
reproducible builds.
- Adapt three spots to the current library API (behavior preserved):
* RingBuffer<uint8_t>::read() -> bool read(T&)
* connection-state callbacks: drop esp_bd_addr_t arg
-> (esp_a2d_connection_state_t, void*)
* BluetoothA2DPSource::start(name, bool) -> start(name)
(auto-reconnect already configured via set_auto_reconnect(true))
Verified: pio run -e esp32dev succeeds.
RAM 14.5% (47.6 KB), Flash 42.0% (1.32 MB / 3 MB).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
2026-06-10 09:44:09 -04:00 |
|
